Latest hdpe pipe laying Tenders | Government hdpe pipe laying Tenders

CTN :40065878

09 May, 2025 NA

Hooghly - West Bengal

Tender For supply of disconnecting and taking out defective under ground lt cable from trenches pole pipe floor wall etc,supply laying testing and connecting xlpe sheathed pvc insulated screened pvc bedded galvanised steel strip of wire armoured electric power cable heavy duty,all as per boq item no 2.00 here in before but of size 4.0 core 16 sqmm. complete all as specified,all as per boq item no 2.00 here in before but of size 3.5 core 25 sqmm. complete all as specified,all as per boq item no 2.00 here in before but of size 3.5 core 50 sqmm. complete all as specified,all as per boq item no 2.00 here in before but of size 3.5 core 70 sqmm. complete all as specified,all as per boq item no 2.00 here in before but of size 3.5 core 95 sqmm. complete all as specified,laying only and connecting xlpe sheathed pvc insulated screened steel strip of wire armoured aluminium conductor 1100 volt grade of size 4 core 10 sqmm,all as per boq item no 8.00 here in before but of size 4.0 core 16 sqmm. complete all as specified,all as per boq item n

State Government

CTN :40052198

28 Apr, 2025 30.00 Lacs

Jaipur - Rajasthan

Tender For gram panchayat govindpura me nrega yojna meterial supply tender 2025-26-, , bandhani , , bhisti , , blacksmith 1st class , , and , , blacksmith 2nd class , , and , , carpender is great , , and , , carpenter 2nd class , , chowkidar , , beldar , , coolie , , fitter(grade1) , , assistant fitter or 2nd class fitter , , glazier , , mason(for plaster of paris work) ist class , , mason (brick layer) ist class , , mason (brick layer)2nd class , , mason (for plain stone work) 2nd class , , mason (for ornamental stone work) ist class , , driver (for road roller, concrete mixer, truck etc) , , mate , , sewer man , , mistry , , painter , , rock excavator , , rock breaker , , rock hole driller , , stone chiseller , , sprayer (for bitumen, tar etc) , , skilled beldar (for floor rubbing etc.) , , white washer , , nozzel man/gun man , , mason (average) , , carpenter (average) , , operator (pile/special machine) , , skilled torch operator for laying tack , , technician , , helper (technician) , , labour for fabrication of upvc extruded casement/sliding windows and doors including drilling holes, fixing of fittings & hardwares, hire charges of drill machine and electricity charges etc. , , labour for installation of upvc extruded casement/ sliding windows and doors including scaffolding , , security guard without gun (8 hours shift duty per day) , , security guard with gun (8 hours shift duty per day) , , mali (semi-skilled) , , earth carriage 50 m head load 1.2.2 , , manure/sludge carriage 50 m head load 1.2.3 , , , r.c.c hume pipe with collar np 3 1200 mm dia , , r.c.c hume pipe with collar np 3 1000 mm da , , r.c.c hume pipe with collar np 750 mm dia , , r.c.c hume pipe with collar np 600 mm dia , , r.c.c hume pipe with collar np 450 mm dia , , r.c.c hume pipe with collar np 300 mm dia , , steel conduit ?s? marked 20 mm da , , steel conduit isi marked 25 mm dia , , tar (charcol) , , pvc water tank with cover (is: 12701-1989) , , 13/0.20mm twin core pvc flexible copper cable with cover , , steel fastner 6 mmx 75 mm , , pvc conduit pipe isi mark 25 mm dia , , pvc conduit pipe isi mark 20 mm dia , , junction box 20 mm two way , , junction box 20 mm one way , , junction box 25mm two way , , junction box 20 mm one way (pvc) , , module g.i. box 3 module , , module g.i. box 2 module , , module base and cover plate 2 module , , module base and cover plate 3 module , , moduler switch one way, isi mark s.p 15/16 amp. , , modu?er switch one way, isi mark s.p 5/6 amp. , , module socket outlet, isi marked 3 pin 5/6 amp , , module socket outlet, isi marked 6 pin 15/16 amp , , m.c.b. db 2 2 way, spn single door , , m.c.b. db 2 4 way spn single door , , m.c.b. db 2 6 way, spn single door , , g.i. pipe (midume pipe) 15 mm dia , , g.i. pipe (midume pipe) 40 mm dia , , copper wire 8 swg (4mm dia) (0.117 kg/m) , , ci/ms cover plate connected with locking pattern and frame , , marbal stone (rajnagar ii quality/local 20 mm thick) more than 2300 sqcm , , marble stone (makarana 20mm thick) more than 2300 sqcm , , kota stone polished (one side polished) up to 900 sqcm , , stone aggregate 40mm thick (cruser broken) (deduct voids 1/11) , , sand stone for dpc, sill, coping, lintel, tand, almirah etc. 25mm to 40mm thick , , sand stone for dpc, sill, coping, lintel, tand, almirah etc. 40mm to 50mm thck , , unpoliced rough kota stone up to 900 sqcm , , painter , , person for materiel loading and unloading (rates as per rdd labour) , , 63-40mm crushed stone aggregate (cut voids 1/11) , , person for materel loading and unloading (rates as per rdd labour) , , suplying of polythene bags including transporation , , supplying of goats manure for filling of polythene bags including transportation , , supplying of clay soil for filling of polythene bags includind transportation , , supplying of sandy soil for filling of polythene bags including transportation , , plastic threaded and transparent pipe of 3/4 inch dia , , supplying of insecticide liquid including transportation

State Government

CTN :40043641

30 Apr, 2025 1.20 Crore

Sukma - Chhattisgarh

Tender For construction, testing and commissioning of r.c.c. elevated service reservoir of 40kl capacities & staging 12. mt. including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber (02 nos)&providing, laying, jointing, interconnection, testing and commissioning of mm dia to 63 & 75 mm hdpe pe-100 , pn-6 pipe 90mm dia upvc class 6/10 kg/sqcm with suitable joints & 80 mm dia gi pipe, valve specials and all fittings including all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity single & three phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications butexcludingpipe, ss /nylonwireropeandconnection cable including verification & electric connection from cseb, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr, installation of 01 no. electro chlorinator , construction of chlorinator room of size 2.4*2.4*3.0 mtr , providing functional household tap connection(f.h.t.c) in individual households and government instiution etc. complete with trial run operation & maintanance for 03 months under single village of piped water supply scheme under jal jeevan mission for village- gumma ,(gp.) gumma block- chhindgarh, district sukma at risk and cost ( old sor)

CTN :39657632

22 Apr, 2025 6.20 Crore

Kolkata - West Bengal

Tender For corrigendum : carrying out various instrumentation works for part a as per standard specification by providing all required materials in connection with the composite works for setting up of hpg-2, butene-1 and psa units at lepetkata, assam of m/s bcpl-instrumentation"pressure gauges and accessories (excl. supply of impulse pipe / tubing materials)"installation of line mounted or remote mounted or local gauge board mounted pressure gauge/ pressure gauge with pulsation dampener / syphon / over-range protector (direct / surface mounted / diaphragm seal type) inclusive of mounting of instrument, supply and erection of supports / tray, mounting on support (if support required), laying of capillary on tray, fabrication and installation of manifolds / impulse lines with supports as per standards indicated below, hydraulic testing and painting of supports but exclusive of supply of instrument, gauge board, yoke, piping material and calibration.in stainless steel as per standard 7-52-0432/1112in carbon steel as per standard 7-52-0432/1112in carbon steel as per standard 7-52-1222in carbon steel as per standard 7-52-1210in carbon steel as per standard 7-52-0433/1113in carbon steel as per standard 7-52-1120in carbon steel as per standard 7-52-0459/1158"pressure instruments (excl. supply impulse pipe / tubing materials)"installation of pressure transmitters/ pressure switches (with or without pulsation dampener, over-range protector)/ diaphragm seal type pressure transmitters/ diaphragm seal type pressure switches including mounting on yoke/ surface, supply of supports for capillary, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of supply of instrument, piping/tubing materials, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard 7-52-0437/0438/1131/1132in carbon steel as per standard 7-52-1222in carbon steel as per standard 7-52-1223in carbon steel as per standard 7-52-2103in stainless steel as per standard 7-52-1223in carbon steel as per standard 7-52-1143in stainless steel as per standard 7-52-1143"differential pressure instruments (excl. supply of impulse pipe/tubing materials)"installation of differential pressure transmitters (including one side capillary type)/ differential pressure switch(including one side capillary type)/ diaphragm seal type dp transmitters/ diaphragm seal type dp switch including mounting on yoke/ surface, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, supply and fabricating of supports for capillary, laying of capillary on supports, painting, installation of flushing connection, hydraulic testing of impulse lines as per standard indicated below but exclusive of supply of instrument, piping material, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard 7-52-0452/1171in carbon steel as per standard b348-7-52-4062in stainless steel as per standard b348-7-52-4062in carbon steel as per standard b348-7-52-4063"differential pressure (flow) transmitters (excl. supply of impulse pipe/tubing material)"installation of differential pressure(with or without integral manifold)/ diaphragm seal type differential pressure flow instruments including mounting on yoke, supply of supports for impulse lines/ manifolds/ capillary, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of supply of instruments, piping material, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard b348-7-52-3339in carbon steel as per standard 7-52-1305in stainless

State Government

CTN :40011138

19 Apr, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For material purchasign for c c road vishesh ghatak yojna at village pimpalgaon gangdeo tq phulambri dist chhatrapati sambhajinagar - laying and jointing pvc pipe. heading, providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with crushed sand/grit, ramming, watering etc. complete, providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss *metal for foundation and bedding including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade), providing and laying in situ / ready mix m-20 cement concrete of trap/granite /quartzite /gneiss metal for approach slab / rigid pavement .including compacting, finishing, curing etc. complete. (excluding reinforcernent) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with scada with fine agreegates of required specifications (natural sand / vsi sand finely washed etc), cernent, the total value of schedule4

State Government

CTN :40011141

19 Apr, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For material purchasign for c c road vishesh ghatak yojna at village wiramgaon tq phulambri dist chhatrapati sambhajinagar - laying and jointing pvc pipe. heading, providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with crushed sand/grit, ramming, watering etc. complete, providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss *metal for foundation and bedding including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade), providing and laying in situ / ready mix m-20 cement concrete of trap/granite /quartzite /gneiss metal for approach slab / rigid pavement .including compacting, finishing, curing etc. complete. (excluding reinforcernent) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with scada with fine agreegates of required specifications (natural sand / vsi sand finely washed etc), cernent, the total value of schedule4

State Government

CTN :39929417

24 Apr, 2025 28.90 Lacs

Parganas - West Bengal

Tender For house service connection metering arrangement for households necessary hdpe pipe laying with restoration at zone_c ward no 7_8_9 under garulia municipality under amrut 2_0

CTN :38087746

15 Apr, 2025 NA

Koraput - Odisha

Tender For bid to ras procurement and installation of cctv surveillance system at nad sunabeda - ip ptz dome camera , ip smart bullet camera , video management software with licence , failover licenses , video analytics licenses for fixed camera , joystic controller , vms server , network attached storage for 30 days , workstation with processor intel xeon , 50 inch full hd led display , 40 inch full hd led display , pc with core i5 , 6 kva online ups system , 2 kva ups system , 600 va ups , 24x10 100base-tx ports layer 2 managed switch , 8x10 100tx layer 2 managed switch , 64 gb sd card , 19 inch 27u rack with accessories , 19 inch 6u rack with accessories , 7 mtr pole , 500wx500hx300d ip 66 junction box , 1.5 ton splilt ac , 6 core single mode armored ofc cable , 2.5 sqmm 3 core armored power cable , 1 inch hdpe pipe , 12 port rack mount liu , 12 port wall mount liu , ofc patch cords , cat 6 cable box 305 mtrs , 1 inch casing capping , power accessories , cable route markets , digging and refilling of soft soil , digging and refilling of hard soil , laying of hdpe pipe , laying of armored fiber cable through hdpe pipe , laying of 3 core armored power cable , laying of cat 6 cable , fixing of casing capping pvc pipe , pigtails splicing charges , poles erection charges , route markers erection charges , installation and commission

Central Government And Public Sector

CTN :39978436

01 May, 2025 34.81 Lacs

Kaiga - Karnataka

Tender For supply, fabrication, welding/joining, erection and testing of hdpe piping from kgs 3 and 4 to kaiga 5 and 6 area. - supply items (schedule-a), 100 nb equal tee sch 40 astm a 234 gr. wpb sml bw ansi b 16.9, 1oo nb sorf flange 150 # astm a 105 ansi b 16.5, 100 nb blind flange 150 # astm a 105 ansi b .16.5, 100 nb gate valve manual op. flange end 125/150 # sa 216 gr. wcb ansi b 16.34, 100 nb ball valve manual op. flange end 125 /150# hdpe, suit to 100 nb,sa 105, 150 # ansi b 16..5 back ring flange, flange end mechanical type flow totalizer 150# (range 150000 to 200000 cu. mtr.capacity) to suit to 100 nb sa 105 flange 150 #, ansi b 16.5. flow meter totaliser specification, dn-110 hdpe pipe is 4984 gr. pe 80 pn 6, dn-110 hdpe 90 degree elbow, is 4984 gr. pe 80 pn 6 as per is 8008, dn-110 pipe /stub end, 1s 4984 gr pe 80 pn 6 as per is 8008., 100 nb cs back ring flange astm a 105 as per ansi b 16.5 150#, dn-110 hdpe equal tee, is 4984 gr.pe 80 pn 6, as per is 8008, dn-50 hdpe cap, is 4984 gr. pe 80 pn 6, as per is 8008., hexagonal headed bolt, nut with washer 85 mm long is 1363 gr. 6.3 /is 3757 gr. 8.8, ismc 100 is 2062 , e 250 gr. a, 12 mm thick plate is 2062 , e 250 gr. br, 110 nb ms u clamp 25 mm wide x 3.5 mm thick, 100 nb m 12 u bolt is 2062 e 250 gr. a, m 10 x 100 hst/faz, 1.6 mm thk caf gasket 100 nb is 2712 gr. w/3, erection item (schedule-b), butt fusion welding / joining and laying of dn- 110 hdpe pipe, is 4984, grade pe 80, pn 6 both under ground and above ground., butt fusion welding / joining and erection of dn-110 90 degree elbow, hdpe, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of both end), butt fusion welding / joining and erection of dn-110 hdpe equal tee, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of three end), butt fusion welding / joining and erection of dn-110 hdpe pipe end /stub end is 4984, grade pe 80. pn 6, butt fusion welding/joining and erection of dn-50 hdpe cap is 4984 grade pe-80 pn-6, installation of 100 nb hdpe ball valve without welding., fabrication , erection , welding, inspection,surface cleaning & supply and application of hb chlorinated rubber zinc phospate primer paint in two coats to minimum 100 micron dft and supply and application of hb chlorinated rubber finish paint in two coats to 60 micron dft for cs structural steel support and components., installation of anchores m10 x 100 mm hst/faz including handling,scafolding,labour & tools., removing & reinstallation of precast concrete slab 0.3 m (l) x 1.350 m (w) x 0.1 m (t), excavation and backfilling of excavated trenches with the soil after completion of installation of pipe lines and testing including levelling/grading, compaction to the required level 1.5 m (d)x 0.8 m (w), sand bedding 50 mm depth x 400 mm width for underground hdpe piping including supply of sand., dismantling of existing dn-50 hdpe piping including breaking of existing cement concrete ( 0.7 cub.mtr) & pcc to be done after breaking and removing of existing cement concrete, including tools, labour & disposing of unservicable material as directed by eic, carefully removing the korean grass along with soil of 100 mm to 250 mm depth and 1500 mm width including replacing the same removed korean grass along with soil after laying hdpe line along with tools & tackles,watering of grass,dressing of area etc.in all complete as per direction of eic

Central Government And Public Sector

CTN :38934831

19 Apr, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of - motor point machine for railway yard trs- motor point machine for railway yard trs description of materials and execution for installation, wiring & testing to operate the point machine at nalco rly yard as per eco.railway sepcfification. 1. supply of electric point operating machine 143mm non trailable to operate on 110v dc complete with lock detector, point junction box along with telescopic pipe and slides for lock and detector- rotary locking. universal type as per specification no: irs/s/24/2002 with latest amendment and drg. no.: rdso/s: 10800 (foc motor) along with standard tool kit set for every 4 point machines. (1no.) 2. supply of ground connection set complete suitable for rotary locking type irs electric point machine as per drg. no. s-3262 for 60kg rail with insulating materials with insulation materials. (1 set) 3. supply of junction boxes with covers and terminal plates 24/30 way to suit drg. no. 236967/1 (as amended up to date) and irs: s-10/78. this includes supply of pbt terminal. (1 nso.) 4. transportation, installation of point machine on ms plate fixed on wooden/psc/steel sleeper complete with fixing of anti-theft arrangement, "d" bracket, junction boxes, connection including smithy works involved for ground connection, including riveting/welding of angle cleats, termination of cables. preliminary adjustment for operation of points by crank handle oiling, greasing, painting and lettering as required. this also includes supply and fixing telescopic arrangement using gi pipes of required dia for provision of wires from junction box to point machine.(1 no.) 5. wiring and testing of electric point machine as per the wiring diagram supplied by the railway. this also includes the connection of electric point machine and fixing of insulation materials and providing two numbers of seven lever ( 7 lever) goderj locks with three keys each, per machine for outside cover, fixing arrangement of crank handle interlocking in point machine, and fixing of e type lock ( if required).(1nos.) 6. supply of steel apparatus case large size as per drg. no.- con/sk/1/186/ and spec no irs:s-10/78 (adv) with latest amend. with "e" type lock & key of ward no.-32 with handle. (1 nos.) 7. transportation, excavation of pit, casting of foundation, plastering and erection of steel apparatus case (full) with fixing of e-type lock, wiring, cable entry, termination, clamping filling cable pit with sand, painting and lettering etc., as per drg no. s & t/con/sk/16. this included earth work and/or masonry work required for securing the apparatus case as per site condition including supply of all required materials wire coils 6 way terminal pbt hylam sheet, wooden plank etc. (1 no.) 8. pvc insulated amoured, unscreened, underground railway signaling cable as per specification no. irs:s63/2014(rev.4.0) 12/core (250 mtrs) 9. excavation of trenches of depth 1.0m including clearing of roots and trees etc. for all types of soil. this work also including covering of cables laid in trench and backfilling, ranning and consolidation of soil as well as disposal of extra soil after cable is laid as specified in guidelines on signaling cable laying given by rdso and any latest circular.(100 mrtrs) 10. track crossing by horizontal boring method as per technical specification of manual as per feasibility of site condition including supply of dwc pipe or hdpe pipes. (18 mrts) 11. laying of signaling cable/power cable to extend the power of all sizes in excavated trench, etc. (0.5 km) 12. supply, transportation, installation, testing and commissioning of earth electrode, construction of cement enclosure to drg. no. con/sk/t/9a and drawl of 6 swg wire or 2 nos. of 8 swg wires from each electrode to place advised by the site engineer including fixing and soldering of lugs and measuring, painting of the earth resistance etc. (1 nos.) 13. supply of smr ower panel (minl ips) having smr module03 nos., dca card01, dc-dc convertor

Hdpe Pipe Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government And Public Sector

Central Government And Public Sector