Latest helium neon laser Tenders | Government helium neon laser Tenders

Central Government/Public Sector

CTN :40794629

30 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For providing of custom bid for services - manual gas cutting of blooms and manual billet charging in rhf at hot mill, sstp, trichy

Central Government/Public Sector

CTN :40784045

30 Jun, 2025 NA

Hyderabad - Telangana

Tender For procurement of hss ps end mill,tanged end mill and slot drill - procurement of tools, hss ts tngd end long endmil dia 63x355mm -- hss m42 morse taper shank end mills type a, tanged end long series tool type n, rh cutting, rh helical flutes, as per is:6354-1971, with cotter slots on the shank as per is:13776-1993, d(dia) x morse taper, 63 x mt5, hss ts tngd rough endmil dia 63x450mm -- hss m35 taper shank type a heavy duty rough end mill, long series, rh cuuting, rh helical flutes, sinosoidal form with chip breaker grooves in ground relieved, except size all other details as per is:6354-1971 with cotter slots on the shank as per is:13776-1993 d(dia) x l(fl) x l1(oal) x shank: 63 x 250 x 450 x mt5., hss ts tngd rough endmil dia 63x325mm -- hss m35 taper shank type a tanged end heavy duty rough end mill, long series, rh cuuting, rh helical flutes, sinosoidal form with chip breaker grooves in ground relieved, except size all other details as per is:6354-1971 with cotter slots on the shank as per is:13776-1993, dia xmorse taper, d(dia x l (fl) x l1 (oal) x shank, 63 x 150 x 325 x mt5, hss ts tngd rough endmil dia 50x375mm -- hss m35 taper shank type a tanged end heavy duty rough end mill, long series, rh cuuting, rh helical flutes, sinosoidal form with chip breaker grooves in ground relieved, except size all other details as per is:6354-1971 with cotter slots on the shank as per is:13776-1993, dia xmorse taper, d(dia x l (fl) x l1 (oal) x shank, 50 x 200 x 375 x mt5, hss ts tngd rough endmil dia 50x300mm -- hss m35 taper shank type a tanged end heavy duty rough end mill, long series, rh cuuting, rh helical flutes, sinosoidal form with chip breaker grooves in ground relieved, except size all other details as per is:6354-1971 with cotter slots on the shank as per is:13776-1993, dia xmorse taper, d(dia x l (fl) x l1 (oal) x shank, 50 x 125 x 300 x mt5, hss ts tanged end endmill dia 63mm -- hss m42 morse taper shank end mills type a, tanged end standard series tool type n, rh cutting, rh helical flutes, as per is:6354-1971, with cotter slots on the shank as per is:13776-1993, dia x shank, 63mm x mt5, hss ts tngd end long endmil dia 40x265mm -- hss m42 morse taper shank end mills type a, tanged end long series tool type n, rh cutting, rh helical flutes, as per is:6354-1971, with cotter slots on the shank as per is:13776-1993, d(dia) x morse taper, 40 x mt4, hss ts tngd end long endmil dia 25x202mm -- hss m2 morse taper shank end mills type a, tanged end long series tool type n, rh cutting, rh helical flutes, as per is:6354-1971, d(dia) x morse taper, 25 x mt3, hss ts tngd end long endmil dia 40x375mm -- hss m42 morsetaper shank end mills type a, long series tool type n, rh cutting, rh helical flutes, except size all other details as per is:6354-1971, with cotter slots on the shank as per is:13776-1993, d x l x l1 x taper, 40 x 200 x 375 x mt5, hss ts tanged end endmill dia 50mm -- hss m42 morse taper shank end mills type a, tanged end standard series tool type n, rh cutting, rh helical flutes, as per is:6354-1971, with cotter slots on the shank as per is:13776-1993, dia x shank, 50mm x mt5, hss ts tanged end endmill dia 40mm -- hss m42 morse taper shank end mills type a, tanged end standard series tool type n, rh cutting, rh helical flutes, as per is:6354-1971, with cotter slots on the shank as per is:13776-1993, dia x shank, 40mm x mt4, hss ts tanged end endmill dia 32mm -- hss m42 morse taper shank end mills type a, tanged end standard series tool type n, rh cutting, rh helical flutes, as per is:6354-1971, dia x shank, 32mm x mt3, hss slot drill dia 26mm -- hss m2 slot drills with parallel shank type a with flat face, straight flutes, rh cutting, tool type h, except size all other details as per is:6352-1971, d(dia) x d1(shank dia), 26 x 25mm, hss ps end mill dia 4mm -- hss m2 parallel shank endmills, tool type n, rh helical flutes, rh cuuting, type a as per is:6353-1991, dia : 4mm, hss ps end mill dia 6mm -- hss m2 parallel shank end

CTN :40405363

23 Jun, 2025 12.20 Crore

Netanar - Chhattisgarh

Tender For bid to ras custom bid for services - operation and maintenance of mobile equipment at nsl for a period of 01 year in 3 mtpa isp at nagarnar near jagdalpur, chhattisgarh state-nmdc steel limited has setup up a 3.0 mtpa integrated steel plant at nagarnar, chhattisgarh with coke oven, sinter plant, blast furnace, steel melting shop, thin slab caster, hot strip mill route and other auxiliary units- 2. contractor s scope of work/supply/responsibility: brief description of scope of work (not limited to) needs to be carried out by successful bidder 1. to carry out operation of mobile equipment as mentioned in annexure a by deputing skilled, qualified and experienced manpower. 2. to carry out maintenance of mobile equipment as mentioned in annexure b by deputing skilled, qualified and experienced manpower. 3. to maintain and operate the effluent treatment plant specially made for fmd as per environmental norms. 4. deployment of at-least the prescribed minimum strength of experienced manpower as indicated in clause no. 5.0 to successfully execute the operation & maintenance activities, with a provision to keep reserve in each manpower-category (if required) to meet the minimum daily requirement for round the clock operation and maintenance. 5. all the tools tackles and special tools including diagnostic tools like: mechanic tools, electrician tools, welder tools, tyre fitter tools, special tools, lifting tools, hydraulic pressure testing kit etc. required for operation & maintenance and repair of mobile equipment is in bidder s scope. separate tools should be available for site maintenance team and shop floor team. all tools and tackles should be tested and certified by third party. 6. all the shift personnel will report to respective shift supervisor of the successful bidder administratively. the shift supervisor shall be decided by bidder in consultation with nsl. bidder shall organize all the jobs of o&m with the help of their supervisors/ engineer and they shall coordinate continuously with nsl to carry out the operation and maintenance activities. 7. operation and maintenance of mobile equipment shall be carried out on 24 x 7 basis including sundays and holidays on a shift-wise basis (four shifts [a, b, c & g]. i. for operation: 1.operation of all the equipment will be in all shifts as and when required as listed in annexure a. 2.inspection report of vehicle will be prepared by bidder and approval of the same will be obtained from nsl. a.preventive maintenance: 1. checking/ adding/ replacing engine oil, hydraulic oil, brake oil, def level etc.; 2. checking and cleaning oil filter; 3. checking and adding/replacing engine coolant as the case may be; 4. checking fuel level and adding fuel if required; 5. checking and cleaning of fuel and air filters; 6. checking hydraulic filters, hoses, seal, o-ring etc.; 7. checking electrical switches, relay, fuse, bulb etc.; 8. battery charge level checking and charging & battery maintenance/cleaning; 9. checking all the safety devices like back horn, seat belt, camera, beacon light etc.; 10. check air pressure in tyre and check wheel nut tightness; 11. checking and adjustment of transmission, alternator and other belts and chain drive; 12. cleaning and washing of the vehicles; 13. maintaining good housekeeping of washing ram; 14. cleaning of operator/driver cabin; 15. greasing in all points; 16. apply cardium compound on wire rope/crane rope; 17. any other activity as required. b. periodic maintenance 1. engine oil change; 2. replacing fuel filter; 3. replacing oil filter; 4. changing of air filter kit; 5. change of steering filter; 6. gear box oil change; 7. rear axle oil change; 8. power steering oil change; 9. replacement of coolant; 10. carrying out tyre inflation and repair; 11. welding and gas cutting works; 12. housekeeping work of the repair shop; 13. cleaning and washing of the vehicles. c.breakdown maintenance: in case of breakdown of any mobile equipment as listed

CTN :39038230

03 Jul, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itot in fitter tradeat iti tarsali, gujarat, india (package 4: fitter trade) - ss and sc center lathe (all geared) , design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics. , design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic. , design, supply, installation, commissioning, testing and training of advance factory automation training kits , application learning systems , hydraulic power saw machine , cnc turn centre , universal milling machine with minimum specification , vertical milling machine , cnc machining centre , cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders. , surface grinding machine , universal tool and cutter grinding machine , interchangeable ratchet socket set , hand reamer adjustable cover , hand reamer taper , reamer parallel , set combination , micrometer (0-25) , micrometer (25-50) , micrometer (50-75) , micrometer inside (0-25) , vernier calliper (150mm) , vernier height gauges , vernier bevel protractor , drill twist taper shank , drill chuck , wheel dresser , machine vice (4 inch) , machine vice (6 inch) , sleeve drill morse , bench vice , leg vice , dial test indicator , lathe tools hss tipped set , lathe tools bit hss , counter boring and counter sinking tool , arm strong type bit holder rh , arm strong type bit holder lh , arm strong type bit holder straight , straight edge , surface plate , marking table , universal scribing block , v- block pair , square adjustable , angle plate , spirit level , portable hand drill (electric) , twist drill straight shank , twist drill straight shank , taps and dies complete set , taps and dies complete set , taps and dies complete set in box , pipe wrench , pipe wrench , pipe vice , adjustable pipe tap set bsp with die set cover pipe size , wheel dresser(1for4units) , machine vice , machine vice , sleeve drill (morse taper) , bench vice , leg vice , gauge slip as johnson metric set , carbide wear block , gauge snaps , gauge plug single ended , gauge telescopic , dial vernier caliper , vernier micrometer , depth micrometer , vernier caliper , comparators stand with dial indicator , surface roughness comparison plates , digital vernier caliper , digital outside micrometer , digital dial test indicator , hardness tester , flat tongs , round tongs , straight snips , bend snips , solder bit /soldering iron hatchet type , anvil , swage block , trammel , hand groover , portable forge with hand blower , gas cutting torch with different noses , arc welding table with positioner , gas welding table with fire bricks , grinding attachment for lathe , dial test indicator , sine bar , sine bar , micron suitable to measure minimum 300mm distance. (optional) , surface roughness tester , air conditioner , drilling machine pillar type with drill chuck & key. , pedestal grinder double end type. , power saw machine stroke length160 mm , fly press 4t capacity , arc welding transformer-single phase,200 amps. (with cable, electrode holder and all other accessories) , oxy-acetylene gas welding plant with all accessories , tig welding machine , co-ordinate measuring machine having accuracy of 5 , workbench , special tools and equipment , tool holder to suit the cnc machine (sl. no. 183) for turning, threading (external &internal), grooving (external &internal), parting off operations, drilling, boring, undercutting (with 20 inserts for each operation) , worktable to mount small machines , worktable to mount small machines , worktable to mount small machines , work benches with bench vices , dg set (power backup) , engineering drawing trainees tool kit , air conditioning for classroom , air conditio

CTN :40449397

23 Jun, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of advanced composite cutting mill

CTN :40468612

25 Jun, 2025 20.0 Thousand

Panchkula - Haryana

Tender For corrigendum : supply of cnc machine cutting tools square shoulder facemill - square shoulder face mill dia 20 mm cylinderical shank ap 11 z 2 oal 81 vsm11d020z02b20xd11(widia) , suitable inserts iso p30 for above face mill dia 20 , square shoulder face mill dia 25 mm cylinderical shank ap 11 z 2 oal 88 vsm11d025z03b25xd11(widia) , suitable inserts iso p30 for above face mill dia 25 , square shoulder face mill dia 40 mm cylinderical shank ap 17 z 4 oal 110 vsm17d040z04b40xd17(widia) , suitable inserts iso p30 for above face mill dia 40

Corporations And Associations And Others

CTN :40731285

23 Jun, 2025 NA

Rohtak - Haryana

Tender For general mill store items - s. s. 304 split pin size 5/25, as per sample, good quality, ring type rubber bush for travelling grate drive coupling, as per sample, good quality, m. s. washer i.d 17mm , od 30 mm, thik- 3mm, as per sample, good quality, cotton waste, good quality, turk head wire bush o.d- 55mm, heavy duty, hexa blade high speed, cutting wheel ag-4, grinding wheel ag-4, buffing wheel ag-4, steam hose-1w size- 1 (25mm), tube- black epdm reinforcement: double wire braded high tensile steel wire, cover black epdm, make- indomabsson, rustolene (500ml) pack, good quality, wire brush, good quality, paint brush 4 , good quality, paint brush 2 , good quality, teflon tape, m-seal, red lead, soldering flues, soldering paste, copper rivet 5x25mm, old dhoti, taflon hammer, star coupling (l-190) rubber, engine oil for actuator 20w40, make- castrol/servo, brasso 500ml, annabond 666, asbeston flat temp: 1000 c 3 rol (30 mtr each), d.p. test kit 96, make- checkmate, d.p. test kit 97, make- checkmate, d.p. test kit 98, make- checkmate, cold galanizing sprey, make- molykote, m. s. washer 3/8 , m. s. washer 1/2 , m. s. washer 5/8 , m. s. washer 1 , m. s. nut only , m. s. bolt with nut x 2 , m. s. bolt with nut x 4 , m. s. bolt with nut x 6 , m.s nut with bolt x 1 , m. s. nut with bolt x 2 , m. s. bolt with nut x 3 , emery paper fine, m. s. bolt with nut 5/16 x 2 , m. s. bolt with nut 5/16 x 2 , m. s. bolt with nut 3/8 x 1

CTN :40140975

18 Jun, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of cutting tools -hss twist drill ps 7.6 mm , gear teeth cutter model cutter no 1 , thread cutting die set m10 x 1mm , thread cutting die set m10 x 1.5mm , thread cutting die set m18 x 1mm , ball end mill cutter 15 mm dia 4.5 mm radius corner ps , hss twist drill ps 2.7 mm , hss twist drill ps 4.6 mm , hss twist drill ps 5.5 mm , t slot cutter 14 mm od 3 mm thk woodniff key cutter , t slot cutter 14 mm od 4 mm thk woodniff key cutter , ceramic nozzle size no 4 , metal oil cans 500 ml , machine cleaning brush , allen bolts m6 x 30mm , allen bolts m8 x 30mm , allen bolts m10 x 30mm , allen bolts m12 x 30mm , cutting pliers , spiral tap m4 x 0.7 , diamond dresser wheel 150 x 30 x 25

CTN :40703987

04 Jul, 2025 NA

Parganas - West Bengal

Tender For supply of insert bit for end mill cutter 60 mm , right hand side cutting tool 16 x 16 mm , right hand side cutting turning tool 20 x 20 mm , thread cutting tool 16 x 16 mm , thread cutting tool 20 x 20 mm , v tool 16 x 16 mm , v tool 20 x 20 mm , parting tool 16 x 16 mm , parting tool 20 x 20 mm , tungsten square bit 100 x 10mm , tangsten square bit 100 x 12mm , lt hand side cutting turning tool 16 x 16 mm , centre drill hss hrc55 a3 15 x 7x55mm 10005 , centre drill hss hrc55 a2x6mmx45mm 10006 , centre drill hss hrc55 a2x6mmx45mm 10003 , end mil cutter 16mm hss , end mil cutter 10mm hss , solid carbide end mil cutter 20mm , hand drill machine , hand grinding machine

Co-operative

CTN :40668507

25 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For motor rewinding - electric motor rewinding insulation class- b0.5 hp, 720, 960, 1440, 2900 rpm stator, 0.75 hp, 720, 960, 1440, 2900 rpm stator, 1.00 hp 720, 960, 1440,2900 rpm stator, 2.00 hp 720, 960, 1440,2900 rpm stator, 3.00 hp 720, 960, 1440,2900 rpm stator, 5.00 hp 720, 960, 1440,2900 rpm stator, 7.5 hp 720, 960, 1440,2900 rpm stator, 10 hp 720, 960, 1440,2900 rpm stator, 11.5 hp 720, 960, 1440, 2900 rpm stator, 12.5 hp 720, 960, 1440, 2900 rpm stator, 15.00 hp 720, 960, 1440, 2900 rpm stator, 20 hp to 120 hp, 720, 960, 1440, 2900 rpm stator, rotor, rewinding of crane duty motor 15 hp, 960 rpm, insulation class- h rotor, stator, 25 hp, 960 rpm, insulation class- h rotor, stator, slipring motor75 hp, 1440 rpm, squral cage rotor of alluminium binding converted into copper strip binding and dynamic balancing with certificate., 120 hp to 250 hp, 960,1440 rpm strip binding rotor, stator, 250 hp, 585 rpm, strip binding rotor, stator, 265 hp, 960 rpm, strip binding rotor, stator, 400 hp, 720 rpm, strip binding rotor, stator, rewinding of cane unloader motor s-5 duty 415 volt15 hp, 965 rpm , 900 starts/stop per hour rotor, stator, 25 hp, 965 rpm , 900 starts/stop per hour rotor, stator, three speed motor insulation class - fcentrifugal motor 110 kw ac 1st speed upto 200 rpm, 2nd & 3rd speed upto 450 rpm & 960 rpm, dc-motor d-412 kcp centrifugal machine 167 kv, 1250 rpm rotor, stator, repair of core assembly for 3 speed motor of centrifugal machine, buffing & policing of rotor commutator of dc motor for d-412 centrifugal machine, welding machine spares rewinding primary coil, secondary coil, choke coil, d.c.welding machine rectifier 230/24 volt, 600 amp., rewinding and repairing of electronic welding machine 3 phase 400 amp., d.g.set spares rewinding166 kva alternator of dg set 1500 rpm, 50hz, pole of rotor 4 nos. complete rewinding h class enamelled copper strip with material and labour and dynamic balancing with test certificate rotor, stator, 320 kva alternator of dg set 1500 rpm rotor, stator, 166 kva alternator set excitation system (booster), 320 kva alternator excitor rotor, 320 kva alternator excitor filed coil, rewinding and repair of submersible pump motor 15 hp, 25 hp, complete rewinding of 1875 kva excitor rotor (jyoti make) of 1500 kw alternator with satisfactory testing & trial on load., other rewinding workbreak thruster mootor, cooler fan single speed / three speed, exhaust fan single phase / three speed, rewinding of celling fan, brass holder for turbine excitor, copper carbon brush for turbine excitor, repairing of d.c. excitor (jyoti make) 15 kw with packing & cutting of commutator & re-soldering of lug etc. complete, charges for supply of diode fixing plate alluminium for 1875 kva turbine alternator, supply & fixing of variable set complete(i) 4 amp. 270 volt, ii) 8 amp. 270 volt., earthing electrode size 75 mm x 3000 mm with chemical bags and fitting at mill site., dismantling of thruster of cane unloader replacement, repair of aluminium housing assembling and testing at 20 kg. load complete in all break system, chief engineer

Helium Neon Laser Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

Co-operative