Latest ht panel scrap Tenders | Government ht panel scrap Tenders

Central Government/Public Sector

CTN :45365796

27 Jun, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

CTN :45224584

01 Jun, 2026 NA

Kutch - Gujarat

Tender For bid to ras supply of ms double door frame 1850x900mm , 30 mm thick flush shutter 900 x 200 mm , pvc wiremesh shutters 1800x850 mm , window glass panes 550x375 mm , wiremesh cloth 0.56mm 4 feet width , window chajja 1200x600mm ppgl sheet , pvc water tank 500 ltr capacity with lead make sintex oxygen vectus with accessories tank nipple gate valve etc , interlocking tile 60 mm thick , kerbstone block 300 x 125 x 300mm , pvc gang box 6 way with plate , pvc gang box 4 way with plate , ceiling rose , square box 3x3 inch , mcb box 40 amp sp , mcb 5 to 30 amp sp , pvc copper cable insulated, multi strands 1.5 sq mm make anchor havells finolex , pvc copper cable insulated multi strands 2.5 sq mm make anchor havells finolex , casing capping 25mm 10 feet , fan regulator , switch 5 amp one way modular , puf panel 10 x 3.50 feet , aluminium window 4x4 feet with complete accessories , exhaust fan 300 mm pvc body , ceiling fan 1200mm sweep body , waste pipe for whb , pvc bathroom doors 30 mm thick of size 750 x 2000mm , urinal waste pipe , cement opc 53 grade 50 kg bag , pcc block 350x200x150 mm , sand coarse , 20 mm stone aggregate , 40 mm stone aggregate , spun cartridge 40x2.5 inch , pvc pipe 110mm dia , pvc elbow 110mm dia , septic tanks cleaning , desert cooler 3000 cmf pvc body 55 ltr water storage cap make symphony vego bajaj , pressure water pump of dredger eqpt alternature repair , vitrified tiles 600x600 mm , tapping screw 3 inch ) /bid number : gem/2026/b/7549325 * /dated: 16-05-2026 & & / bid document 1 / 44

CTN :45370183

09 Jun, 2026 NA

Multi City - Multi State

Tender For supply of shelter parts complete set for office shelter,pcc cement is 1489,coarse sand,20mm aggregates,40mm aggregates,hardcore 63mm stone aggegates,pcc solid block 400 into 200 into 200mm,tmt bars 12mm dia as per is 1786 to 1979,tmt bar 8mm dia as per is 1786 to 1979,tiles non skid of size 600 into 600 into 10mm thick,chequred tile 250 into 250 into 25mm,aluminium composite panel board 1 point 50 into 1 mtr,stainless steel word 250mm long,self trapping screw 55mm,self trapping screw 100mm,pop revit machine,pop revit,high carbon steel casing silicon gun,silicon tube minimum 280ml,water proofing compound,white cement,lime unshaked of best quality,drappery curtain rod 7 feet long 20mm dia,bracket for curtain rod,synthetic enamel paint white colour,synthetic enamel paint black colour,synthetic enamel paint green colour,foam roller brush for wall painting of size 7 inch,painting brush 3 inch,writing brush as approved of best quality,nails 4 inch long,water proof plywood 8 feet into 4 feet into 18mm thick,binding wire 20 ga

CTN :45138827

01 Jun, 2026 NA

Barmer - Rajasthan

Tender For bid to ras supply of s and f of ring main system for wss - supplying laying jointing commissioning and testing 100mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supplying laying jointing commissioning and testing 150mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supply and fix valve reflux with by pass arrangement 100mm 4 inches dia , supply and fix foot valve confirming to is 4038 100mm 4 inches dia , supply and fix valve sluice flanged of class 1 point 6pn 100mm 4 inches dia , supply and fix valves sluice flanged of class 1 point 6 pn 150mm 6 inches dia , supplying installing testing and comissioning of centrifugal pump electric driven capacity not less than 25 lps discharge at 60 metre head in load as per atc , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable hd 1100v grade stranded aluminium conductor size 70 sqmm 3 point 5 core , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable heavyduty 1100v grade stranded aluminium conductor size 10 sqmm 4 core , supplying installing testing and commissioning of outdoor type factory made crca sheet thickness 3 point 15mm platform mounted lt panel board to accommodate as per atc , supplying installing testing and commissioning of indoor type factory made crca sheet thickness 2mm platform mounted lt panel board to accommodate as per atc , supply install test commission centrifugal openwell submersible pump cap 10hp singlephase discharge range 740 to 200lpm head range 35 to 54m suction x discharge pipe dia 65x50mm as per atc , supply and fix cast iron air valves with two air outlets 80mm dia bore and fixing up in ) /bid number : gem/2026/b/7514655 * /dated: 08-05-2026 & & / bid document 1 / 21 & & ' ' /item category cast iron water supply mains , excavation in tranches not exc 1 point 5m wide n exc 1 point 5m depth over exc 10sqm on plan and n exc 1 point 5m in depth for foundations shafts wells cesspite mainholes pier holes as per atc , returning filling in including spreading laveling watering and well ramming in layers n exc 25cm in soft or loose soil complete all as specified and directed by engr in charge , removal of excavated soil material to a distance not exc 50m or depositing where directed at a level not exc 1 point 50 metre above th staring point complete all as specified as per atc , boring of hole under road pavement hardstanding by trenchless technology using ultra sounding technique nec machine incl hdpe pipe 150mm dia suitable for 0 point 4mpa working pressure , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 150mm for taping complete all as specified and directed note tee 150 x 150 x 150mm paid separetly in di special , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 100mm for taping complete all as specified and directed note tee 150 x 150 x 100mm paid separetly in di special , di or ci special such as tee bend collar tail piece and other fitting as required , earthing of poles and other machinery or equipment using 4mm gi wire as earthing lead and ms galvanized plate of size 60cm x 60cm x 6mm as earth electrode , demolition and diasmanttling of concrete in ground floor and pavings n exc 15cm thickness , m and l of cement concrete b 2 1 colon 2 colon 4 40mm graded aggregate 100mm thickness , m and l for contruction of brick masonry valve pit in repair of inter size 90x90x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc , m and l for contruction of brick masonry valve pit in repair of inter size 120x120x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame

Central Government/Public Sector

CTN :45329483

17 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate numbers of anti

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

corporations/Associations/Others

CTN :45288535

15 Jun, 2026 1.05 Crore

Allahabad - Uttar Pradesh

Tender For providing design and drawing(iit vetted) of r.e. wall, earth work, pcc levlling pad, casting and erection assembling and joining of panel filling of fine sand including synthetic geogrid and geo composite drainage sheet with compaction including all

CTN :45296154

01 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of gun pit with ohp - tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4 feet x 18mm bwr grade , plywood for roof shuttering 8mm waterproof , plywood for wall shuttering 14mm , scaffolding pole adjustable 7 feet long , nails 2 inch, 3 inch and 4 inch 10 kg each , pre-fabricated mild steel door of size 5300mm x 3500mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , pre- fabricated mild steel door of size 1300mm x 6000mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg per sqm , deck sheet curved shape 1.20mm tr-50 including all necessary clamps fittings and fixtures , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces , red oxide primer. , bitumen 80 oblique 20 grade , hdpe pipe 75mm dia best quality , fire extinguisher a and b and c type portable net 2 kg capactiy cylindrical isi marked , supply solar lantern model no ms122 solar lantern contains battery, solar panel, led bulbs , lighting conductors set complete with all accessories as per details given , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse conforming to is-383 , stone aggregate coarse 20 mm conforming to is-383 , stone aggregate coarse 40 mm conforming to is-383 , hesco basket , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle isi marked , fish line best quality , wood cutting blades , iron cutter blades 14 inch , plumb bob iron best quality , galvanised iron pan mortar 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft , multipurpose non-slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp

Central Government/Public Sector

CTN :45228052

30 May, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 69 )items as given below ,[1] point wiring with pvc copper wire 964.000 m,[2] circuit wiring with pvc copper wire 300.000 m,[3] power plug wiring with pvc copper wire 91.000 m,[4] supply and fixing of gi box 40.000 ea,[5] supply and laying of pvc conduit pipe 268.000 m,[6] supply and fixing 12 way double door db 5.000 ea,[7] supply,fixing led panel light 64.000 ea,[8] supply,fixing modular switch 6a 51.000 ea,[9] supply,fixing modular socket 6a 2 in 1 12.000 ea,[10] stripping,worn out plaster wall&ceiling 985.000 m2,[11] plaster sand/cement mortar,4:1,thk10mm 589.000 m2,[12] removal,rubbish,earth 23.500 m3,[13] prvdg,pcc wrk,m15,1:2:4 5.360 m3,[14] smooth cement plaster,cm1:6,thk15mm 63.000 m2,[15] dismantling of pcc/ rcc structures 8.500 m3,[16] dismantling of brick work 7.000 m3,[17] supply&layg,vitrified tiles 705.993 m2,[18] supply,fitg,fixg,venetian blinds 24.000 m2,[19] prvdg&fixg,false ceiling 230.520 m2,[20] prvdg,oil bound distemper,2 coat 1818.000 m2,[21] supply&applyg,bison exterior putty 704.000 m2,[22] plstrng,priming timber or steel,1coat 183.000 m2,[23] paintg enamel,timber,hi gloss,2coat,?wh 390.000 m2,[24] fixg porcelain auto cistern,white,10l 12.000 ea,[25] fixg flat back urinal,610x400x380mm 26.000 ea,[26] fixg,granite slab,10-12mm,wrking table 50.000 m2,[27] fixg door fitting,stainless steel aldrop 68.000 ea,[28] fixg,door,fully casing tower bolt 69.000 ea,[29] fixing tower bolts of approved type. 16.000 ea,[30] fixg door handle of approved type&size 138.000 ea,[31] fly ash brick wrk, 110mm, m-7.5, (1:4) 46.000 m2,[32] supply & installation of ms rack 13.000 ea,[33] sup,fit,fix hygeine pipe 27.000 ea,[34] supply gi pipe,dia20mm,medium quality 158.000 m,[35] supply gi pipe,dia15mm,medium quality 91.000 m,[36] supply, istallation of smoke detector 6.000 ea,[37] supply,commode 27.000 ea,[38] supply,low cistern 27.000 ea,[39] fixg,stopcock 93.000 ea,[40] fixg,bibcock 51.000 ea,[41] fixg,shower rose 9.000 ea,[42] fixg,wall tiles,kajaria,jhonson 705.000 m2,[43] fixg,towel rail,cp 24.000 ea,[44] supply,liquid soap container 39.000 ea,[45] supply,fixg,antiskid tiles 334.000 m2,[46] fixg,hessian partition,ordinary teak 47.000 m2,[47] procviding & fixing ring hanger 15.000 ea,[48] proving&fixing design mirror 43.000 m2,[49] fixg,cp pillar cock 22.000 ea,[50] fixg,window glass 59.000 m2,[51] provide partition 9mm particle board 10.000 m2,[52] provide partition 4mm clear gla

CTN :45298008

11 Jun, 2026 NA

Parganas - West Bengal

Tender For supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh multistran

Ht Panel Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector