Latest hydraulic structure Tenders | Government hydraulic structure Tenders

State Government

CTN :45627430

29 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For inviting quotation for purchasing of load frames/support structures, linear/rotary stage (motorized) automatic, ball holder assembly, sample holder for flat specimens, test balls (steel, wc, ceramic etc.)

CTN :45606733

27 Jun, 2026 1.93 Lacs

Malda - West Bengal

Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint

Central Government/Public Sector

CTN :45401215

24 Jun, 2026 NA

Angul - Odisha

Tender For corrigendum : 200151232 contract for supply and application of paint on steel structures of boilers and its auxiliaries area in any one boiler unit of stage-i (2 x 500 mw) and one boiler unit of stage-ii (4 x 500 mw) at ntpc-tstps

Central Government / Public Sector

CTN :45591757

29 Jun, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12232ms26c,98050175, quantity- 60.085 mts. scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 232, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

Central Government/Public Sector

CTN :45155403

24 Jun, 2026 5.79 Crore

Midnapore - West Bengal

Tender For corrigendum : repairing of damaged concrete structures, quay face including painting and replacement of worn out steel structures, wooden facia along with other ancillary works at 3rd oil jetty, haldia township, hdc

Central Government/Public Sector

CTN :45593987

25 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of others - scrap cond. abandoned railway quarters, consisting of rcc, brick masonry, doors and window rails, steel, wood, ac sheets. total qty 433 nos. quarters- 1 set. these quantity are only indicative 1) brick masonry approximate qty 3199.385 m3 2) wood 131.221 m3, approximate 3) steel 91590.85 kg, approximate 4)r.c.c. only 1298.88 m3, approximate 5) ac sheet. 4309.25 m2 approximate, 6) wooden/steel door/windows 3640 nos approximate. note 1. any other material found nearby the lot & it will not be delivered.2. delivery will be given on as is where is basis by lot lot 3. it is strictly advised to bidder to see the lot personally before bidding for the lot, any dispute about quantity will not be considered after bidding 4. cutting, dismantling may be allowed for easy loading purpose at the cost and risk of purchaser 5. dismantling permitted up-to ground level only. 6. purchaser should ensure that during cutting dismantling nearby structures building should not be affected. 7. purchaser will be fully responsible for any mishaps. 8. trains operations and other railway work should not be disturbed and suitable banners at work place has to be arranged by purchaser. 9. free delivery up to 80 days is permitted. 10. before delivery, complete removal of rcc, cc, bricks masonry and rubbish from site will be permitted. 11.the land should be cleared of all debris. 12. all pway material, s&t and electrical materials, fencing, fencing gates items true returnable items which are not included in auction and not permitted to take along with other auctioned items, all returnable items which can be transported to depot will be summited in depot .13. material is physically available.14. delivery of lot by texture unit wise "as is where is basis".15. stock holder is responsible for correct identification of material. 16. if any other material except provided in description is found while delivery, which is strictly restricted & it cannot be delivered.17.presently all the quarters are vacant 18. g.i. pipes are returnable items will be submitted in depot (sse (works) office).19. purchaser will be fully responsible for damaging any railway property.

Central Government/Public Sector

CTN :45593989

25 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of others - scrap cond. proposed abandoned overhead tank , consisting of rcc,steel total qty 01 nos structure. these quantity are only indicative 1)r.c.c. only 15.87 m3 approximate 2) steel 795.024 kg approximate note 1 any other material found nearby the lot & it will not be delivered. 2. delivery of lot by texture unit wise "as is where is basis". 3. it is strictly advised to bidder to see the lot personally before biding for the lot, any dispute about quantity will not be considered after bidding 12. cutting, dismantling may be allowed for easy loading purpose at the cost and risk of purchaser 4. dismantling permitted up-to ground level only. 5. purchaser should ensure that during cutting dismantling nearby structures building should not be affected. 6. purchaser will be fully responsible for any mishaps. 7. trains operations and other railway work should not be disturbed and suitable banners at work place has to be arranged by purchaser. 8. free delivery up to 50 days is permitted. 9. before delivery complete removal of rcc, cc, bricks masonry and rubbish from site will be permitted. 10. the land should be cleared of all debris. 11. approachable by pakka road is about 200.00m away from this rcc tank and to approach to the tank many railway tracks are to crossed. 12. delivery of lot by texture unit wise "as is where is basis 13. stock holder is responsible for correct identification of material. 14. if any other material except provided in description is found while delivery, which is strictly restricted & it cannot be delivered 15. g.j. pipes are returnable items will be submitted in depot (sse (works) office). 16. purchaser will be fully responsible for damaging any railway property like damaging of railway tracks, ohe lines etc. 17. railway tracks are there near this abandoned water tank and ohe electric line is also there over the track. so it would be complete responsibility of the purchaser to secure these railway tracks, ohe electric lines and other railways assets without damaging these assets. 18. purchaser has to inform to sse (works) office at least 3 days prior so that the other concerned departments sses having their materials and facility nearby may be informed (like trd, p-way etc.) and these sses or their representatives would be present during dismantling of the structure and may give instructions to secure their materials and facilities which has to be protected with all the majors as instructed by them has to be followed by the purchaser for dismantling work.

Central Government/Public Sector

CTN :45592870

23 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no. 9832 2000 condemned and unserviceable 3 ton eot crane with electrical motors, panel boards, starters, hoists, bridge drive girder, bridge idler girder, bridge rail, bridge drive and idler wheels, trolley and its frame, dsl guard, electrical wirings, cross travel dsl cables between the run way rails of the crane, 4 nos of main power collection ms angles, electrical wirings,pendent and other original attachements without hooks, snatch blocks/hook blocks and wire ropes carrying the hooks. uc no.230031004. makers name-hoist o mech, bombay.total approximate weight 5517 kgs. [mild steel 5430 kgs, copper- 40 kgs, aluminium %u2013 5 kgs, cast iron %u2013 20 kgs, brass/bronze %u2013 2 kgs,wastage - 20 kgs, other non ferrous - negligible] . as is where is condition. s.1539 voucher no. 738173 dated. 22.01.25. custodian . sse / dsl shed/ goc. note: 1] rate per number should be quoted. 2] crane loading is permitted. 3] cutting is permitted and purchaser has to arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest. 4] purchaser adviced, labours should wear all ppes and follow the safety aspects as per rule in force. 5] purchaser is permitted to dismantle the structure on delivery 6] the purchaser should survey the item before bidding. 7] the purchaser is responsible for any loss if occurs to railways during delivery. 8] utmost care should be taked while uprooting and lowering the crane by the purchaser.9] ladder and structures carrying the main power collection angles i.e insulater brackets are not for sale.

Central Government/Public Sector

CTN :45329968

23 Jun, 2026 NA

Ranchi - Jharkhand

Tender For corrigendum : expression of interest for empanelment of bidders for design and detail engineering of steel structures

Central Government And Public Sector

CTN :45525671

13 Jul, 2026 38.80 Lacs

Mumbai - Maharashtra

Tender For renovation of supply air-conditioning system of k-4 and k5 with other accessories for rlg, barc, mumbai - design, fabrication, supply, installation, testing and commissioning of chilled water base double skin 10000 cfm ahu (without blower) as per clause no. 01 of technical specification., supply, fabrication and installation of ms supporting structures as per clause no. 02 of technical specification., design, supply, fabrication and installation of galvanized steel sheet for discharge air ducts as per clause no. 03 of technical specification., supply and installation of magnehelic gauge pressure range 0 to 25 mm wc including fittings as per clause no. 04 of technical specification., supply and installation of pressure gauges (0 to 7 kg/cm2 range) including fittings and ss ball valve as per clause no. 05 of technical specification., supply and installation of bar stock type ss thermowell with temperature guage as per clause no. 06 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 80 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 100 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 125 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, installation, testing & commissioning of 50 mm size cpvc pipe with fittings as per clause no. 08 of technical specification., supply, installation, testing and commissioning of 100 nb mm dia flange ended gate valve ( ci body and gun metal internal)with suitable fittings and counter flanges for pipelines as per clause no. 09 of technical specification., supply, installation, testing and commissioning of 80 nb mm dia flange ended gun metal gate valve with suitable fittings and counter flanges for pipelines as per clause no. 9 of technical specification., supply, installation, testing and commissioning of 80 nb mm dia globe valve with suitable fittings and counter flanges for pipelines as per clause no. 10 of technical specification., supply and installation of all-around cold insulation saddles for chilled water pipeline along with fixing fittings as per clause no. 11 of technical specification., supply and installation of aluminium construction powder coated air diffuser along with volume control damper as per the clause no. 12 of the technical specification., supply and installation of 38 mm thickness close rubber cell cold insulation of classo fire rating followed by aluminium clading as per clause no. 13 of technical specification., supply, fabrication, installation and commissioning of the ss structural material including ss hardware. as per clause no 14 of technical specification., fabrication, supply and installation of ss construction multilouvered volume control dampers (vcd) along with electricaly operated modulating type actuator as per clause no. 15 of the technical specification., supply, fabrication and installation of plenum connection to existing blower as per clause no 16 of the technical specification., dismantling, segregation, removing & shifting of various equipment like ahu, insulated pipes along with supports, fittings, valves etc. as per the clause no. 17 of the technical specification.

Hydraulic Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors