Latest hydromechanical work Tenders | Government hydromechanical work Tenders

Central Government/Public Sector

CTN :43446505

12 Jan, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of kit module for led based driver/assistant drivers reading desk illumination lamp. inputvoltage range 24v dc to 140v dc retrofit table to existing mechanical housing. module shall have in builtreverse polarity protection over voltage trip protection & current regulation for better life of leds. modulemust have high & low glow switch facility. dimensions as per clw spec. no. clw/es/3/0042, alt-d, anddrawing no. clw/es/3/sk-2/0042. note:-this material must be purchased from clw approved sources only.

CTN :43185310

15 Jan, 2026 NA

Dhanbad - Jharkhand

Tender For corrigendum : supply of equipment for material characterization laboratory of mechanical engineering department of bit sindri dhanbad jharkhand

Co-operative

CTN :43399535

12 Jan, 2026 8.9 Thousand

Mehsana - Gujarat

Tender For supply of comp mech.seal caro v/s mica 25 50 - 3075815, 5.000, item name : complete set of mechanical seal with o ring,,model : ag 11,material:type : tc/tc combination,size:for shaft dia : 50 mm,additional information:for 60 kl silo no. 1 and 2 agitator shaft.

State Government

CTN :43243038

12 Jan, 2026 59.00 Lacs

Kota - Rajasthan

Tender For corrigendum : implants and consumable items for gastroentrology dept - gestroentrology accessories (consumable items 1-25) and items for implants, guide wire (ercp) - 480 cm, 0.025, 1:1 torque ability - 6-9 cm hydrophiic tip, good stiffness, sphincterotome - tripple lumen pull type, tip 4.5 - 5.5 fr - short nose, 20mm, monofilament cut wire, needle knife - triple lumen cut wire-adjustable length, tip 5fr, 2.8mm, channel compatible, biliary stone retrieval balloon - 10-16mm diameter distal type - 7fr, 0.035 wire compatible, stone retrieval basket - 4 wired, 2.8mm working length, 2.5-3 cm diameter, foreign body removal roth net basket - for removal of foreign body from gi tract compatible with adult endoscope. another net basket compatible with pediatric ugi endoscope (channel 1.8-2.2mm), tts ballon - for esophageal, pyloric and colonic dilatation - non complaint maternal, clear see through material, 5.5 cm length multiple size with different pressurea) balloon with 8-9-10 mm diameter, b) balloon with 12-13.5-15 mm diameter, foreign body alligator forceps - 2.8mm adult channel compatible, 230cm length >11mm diameter with rat tooth. another pediatric alligator/rat tooth forceps compatible with pediatric ugi endoscope (channel 1.8 - 2.2mm), polypectomy snare - large size, 3-6 cm oval, 2.8mm, channel compatible, injector - 23g, 240cm, 7 fr. good stiffness, injector -a). 21g, 165cm, 7 fr. good stiffness, biopsy forceps for ugie, colon-reusable with spike, endoscopic clipping device rotatable with witout handle - 2.8mm channel>230 cm length, 2 clip arm length 7-9 mm, mechanical lithotripter basket with and without handle - * through the scope* should have tip breaking technology to avoid impaction* diameter > 3cmshould be wire guided 0.035, biliary stent introducer assembly - for insertion of 10 fr. and 7 fr. plastic stent, multi band ligator set - clear ligator barrel non latex material 6 bands per cylinder, cre inflation device (alliance gun) compatible with cre ttp balloon with syringe, achalasia balloon - over the wire balloon, size 30mm & 35mm, length => 10cm, cystotome - 6 f, 10 f - for transgastric or transduodenal puncture of pseudocyst - 165 cm in length. diathermy ring size compatible with mentioned cystotome., billiary stent (plastic) duoble pigtail - size 7fx10cm, 10fx10cm, 10fx8fm billiary stent (plastic) straight - size 10fx10cm, 7fx10cmpancreatic stent (plastic) - size 7fx10cm, 10fx10cm, 10fx8fm, hydrophilic guide wire (terumo) - straight tip/j-tip, hydrophilic in nature - diameter - 0.032 inch length - 260 cm, biliary bolloon dilator - sizes 4mm, 6mm, 8mm - should have radio opaque marketers for accurate positioning - balloon length 2-4 mm. should be compatible with instrument channel - size 4.2 mm, spring tip steel guide wire - 160-250 cms, eus needle (endoscopic ultrasuound needle) fna needle with 3 different size 19, 22, 25 g, good ultrasuound visibility with adjustable needle needle length and sheath length., through the scope clip - the clip with 11-14mm jaw alongwith 1-2 mm teeth having curved angle., esophageal sems - partially covered - sillicon coating 10,12,15 cm> 18mm diameter> 3 ro marker, thread at proximal-end, esophageal sems - cervical sems - full covered 5mm upper end flare, biliary sems - through the scope 6,8,10 cm length>80% recons > 3ro marker endoscopic8 fr. introduction sysem, duodenal/pylorus sems - uncovered through the scope introduction assembly 10 fr., length 6,9 and 12 cm

State Government

CTN :43395003

01 Jan, 2026 37.00 Lacs

Begusarai - Bihar

Tender For rfp for supply of machines and equipments for mechanical & civil engineering lab at rashtrakavi ramdhari singh dinkar college of engineering (rrsdce), begusarai - model of cochran boiler with accessosries & mounting, model of babcock & wilcox boiler with accessosries & mounting, manufacturing technology lab, slip gauge complete set slip gauge block set, metric, 87 or 103 block of grade 1 steel, vernier calliper, vernier calliper 300 mm, inside vernier calliper 150 mm, vernier gear tooth caliper (0.02mm resolution, mi-26), micrometer, micrometer outside 0-25mm, inside micrometer 25mm, gear tooth micrometer (25mm, 0.01mm least count with interchangable ball anvil/spindle tip type), sine bar complete set (a) sine bar (200mm. hardened tool steel), sine centre complete set sine centre complete set ( roller distance 200mm centre height : 65mm or roller distance 300mm, centre height 75 mm), steel scale, steel scale (150mm), steel scale (300mm), steel scale (1000mm), surface plate with stand • surface plate size: 12"x12"x4" • material: black granite, stand size: 36 inch, lathe tool dynamometer x direction measuring range : 0 ± 3000 n ( 0. 1 n sensitivity ) y direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ) z direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ) measurement : x, y & z direction force measurement simultancously. data recording signal conditioner : gpds signal conditioner accuracy = ± 0.5 % computer with window operating system software “ i t “ lathe tool software exclusively designed and developed for measuring the forces in x. y & z direction during operation. software features are : (a) digital display of forces (b) graphical display of forces (c) data recording, printing, transfer to ms excel dimensions : sensor ( 55 x 125 x 55 mm ) 20mm x 80mm segment provided for fitting in the tool holder of lathe machine power requirement : 220 v 1 phase, 50 hz, drill tool dynamometer axial load capacity: 500kgf. torsional load capacity 50 kf. cm. software “ dt drilling tool software exclusively designe and developed for measuring axial & torsional forces developed during drilling operation software features are : (a) digital display of forces (b) graphical display of forces (c) data recording. printing, transfer to ms excel, optical flat, optical flat, l=12mm, d=45mm, 0.2um, optical flat, l=12mm, d=45mm, 0.1um, optical flat, l=15mm, d=60mm, 0.2um, optical flat, l=15mm, d=60mm, 0.1um, optical flat, l=0.5". d=1.8", 0.000008", optical flat, l=0.5". d=1.8", 0.000004", optical flat, l=0.6", d=2.4", 0.000008", optical flat, l=0.6", d=2.4", 0.000004", talysurf / surftest • detector measuring force: 0.75 mn • stylus tip angle: 60o stylus tip radius: 2 micrometer • measuring method: induction method • stylus: diamond tip • skid radius: 40 mm • sampling length (l): 0.08 mm, 0.25 mm, 0.8 mm, 2.5mm, 8mm or input • no. of sampling length (l): x1, x3, x5, it is having interface for input and out and have display to show primary profile, roughness profile, autocollimator • telescope magnification: 38x • objective: f=700mm • effective aperture: 70mm • measuring range: 30 minutes of arc (both vertical and horizontal axis) • minimum reading: 0.5 seconds of arc • readout system: adjustment in view field and reading on micrometer • measuring accuracy: 0.5 seconds of arc within a range of 5 minutes arc, 1 second of arc within a range of 30 minutes of arc • light source: led, two wire & three wire thread measuring instrument two wire & thread measuring instrument : micrometer range from 0- 25 mm, least count : 0.001mm, 18 set of wires having diameter range: 0.17 – 3.2 mm for micrometer spindle diameter of 6.35mm, dial indicator dial indicator: range: 50mm dial indicator dial indicator range : 50mm resolution. 0.01mm range per rev: 1mm seale, 0-100 accuracy : ±0.03mm measuring force : 3n or less stem diameter : 8mm contact point : carbide tipped horizontal type dial test indicator with bracket : ran

CTN :43420410

23 Jan, 2026 NA

Uttara Kannada - Karnataka

Tender For tender for supply of capacitiv limit switch kg201 induction switch , joint grease 30321 300g 310ccm , shaft sealing ring , mechanical seal , heagon nut fine thread m1415iso10511 din985 , taper rollar bearing 32009 , set of fitting discs , lock nut , keyfitting , cap cover , heagon socket head cap screw m1250iso 4762 din 912 a4 , spring washer b12din 7980a4 14571 , heagon screw m1040iso 4017 din 933 88vz , heagon nut m19iso 4032 din 934 8stvz , set screw , shear plate , spring washer b6din 7980a4 , dosing valve , hose connection , oring , spare part set sps m2211408 , locking screw g12 din 910 14571 , sealing ring , spring washer a10din 127st vz , vring , heagon socket head cap screw m825iso4762 din912 a4 1457 , spring washer b8din 127a4 14571 , coupling rod , stator 60176l , suction casing gasket 6010 sil c4400 911201 mm , holding band , splash ring thrower 6210 nbr , heagon socket head cap screw m625iso4762 din912a4 1457 , drive shaft 7525 , coupling rod bush , locking plate , motor protection switch 610a , auiliary switch block , auiliary switch block1s+1o , auiliary contractor 230v ac 3no 2nc , energy limiter zbzvm , pilot lamp led red 230v , auiliary switch 1 nc + 1 no , switch cabinet door opener , switch cabinet housing ae 1050 , dosing head set dm22116 pvc , supporting disk brass type 220 221 , imtermediate ring z1 , dosing head flange m220 material ultem 2300 black , dosing head disk d95mm375v2a , connection set pvcu2metric , relay module rif2rptldp24dc 421 4 changeover input 24v , end plate seperation plate zaptw zdk25 , nut stopper ns25u106115 , set of fitting discs , ring sealing ns25u122115 , screw adjusting ns25u378115st , indicating display

corporations/Associations/Others

CTN :43100990

09 Jan, 2026 NA

Bankura - West Bengal

Tender For corrigendum : supply of pressure nut, ref drawing no/ part no-act-649, act-132, material-pb-28, (for electro mechanical linea , pressure nut, ref drawing no/ part no-act-649, act-132, material-pb-28, (for electro mechanical linea , gear box, ref drawing no/ part no-act-649, act-132, material-c 45 (is: 1570) , (for electro mechanical

State Government

CTN :43420830

12 Jan, 2026 NA

Varanasi - Uttar Pradesh

Tender For providing of operation and maintenance of electro-mechanical installations - material requirement for emergency m&r at 132 kv sub station bhadohi under etd iv varanasi

CTN :43421904

06 Jan, 2026 NA

Rangiya - Assam

Tender For supply of frame clamped abrasive rail cutting machine having a strong and rigid clamping arrangement made of tough, durable light weight material having sufficient mechanical strength. specification: blade diameter <=400mm height (mm) 400-500 width (mm) 300-400 length (mm) 500-600 no load speed (rpm) 3800 cutting depth (mm) 140-160 cutting range, kg/m 50 power 4.8kilowatt cutting speed <=90 m/s

corporations/Associations/Others

CTN :42941512

12 Jan, 2026 NA

Anpara - Uttar Pradesh

Tender For corrigendum : supply of misc items for ffsd-i & ahd btps anpara - ht hex head full thread nut & bolt ; m16x65 mm,, ht hex head full thread nut & bolt ; m16x70 mm,, hthh bolt with nut & washer , half threaded m16x90, hex hd m18x70; ht 10.9 grade, ms bolt & nut size 20x70 mm, ht hex bolt & nut 20x80fth, fluidizing pads for esp hoppers, size: 374 mm x 374 mm, no. of holes: 16, hole dia: 12 mm material: nomex (as per sample), perforated ms plate, size: 374 mm x 374 mm, having 4.76 mm dia holes at 7.14 mm pitch giving 40.5 % open area plate thickness: 1.6mm, no. of mounting holes: 16, hole dia: 12 mm (as per sample), submersible pump, make-kirloskar, model-eterna 1100 cw+ specification : power supply-415v, 3phaseacpower rating-1.1kw/1.5hpmax. solid handling size (mm) - 24minimum submergence (mm) - 460suction - from bottomsize discharge outlet (mm) - 50max. amb. temperature - 40 degree cdischarge 366 to 84 lpmtotal head - 6 to 14 mtrsspeed (nominal) 2800 rpm, discharge tube with fmb(foam making branch) for mechanical foam extinguisher 50 ltr. discharge tube shall be braided rubber plasticof 3.5 mtr length & 12.5 mm internal dia. fitted with plastic fmb (is-7328) as per is-13386 the discharge hose shall have bu stingpressure of not less than 50 kg/cm . (as per sample), discharge tube for dcp(dry chemical powder) 05 kg extinguisher (plunger type). made of pvc. one end thread is provided to fit withdcp fire extinguisher (plunger type) capacity 5 kg and other end to discharge powder.(as per sample), discharge tube washer for dcp(dry chemical powder) 05 kg extinguisher (plunger type). made of rubber suitable to be fitted withdischarge tube of dcp fire extinguisher (plunger type) capacity 05 kg.(as per sample), discharge tube for dcp(dry chemical powder) 10 kg extinguisher (plunger type). made of pvc. one end thread is provided to fit withdcp fire extinguisher (plunger type) capacity 10 kg and other end to discharge powder.(as per sample), discharge tube washer for dcp(dry chemical powder) 10 kg extinguisher (plunger type). made of rubber suitable to be fitted withdischarge tube of dcp fire extinguisher (plunger type) capacity 10 kg.(as per sample), cap rubber washer for dcp(dry chemical powder) 75 kg extinguishers.made of rubber, suitable to fit in the cap assembly of dcpfire extinguisher capacity 75 kg.(as per sample), discharge tube for dcp 75 kg extinguishers. discharge tube/hose with nozzle squeeze grip aluminum lengths -5 mtr. suitable fordcp type fire extinguisher capacity-75 kg.(as per sample), washer for copper connecting tube 75kg dcp(dry chemical powder) extinguisher. made of rubber. suitable for fitting with copperconne cting tube of dcp 75 kg extinguisher.(as per sample), discharge tube for 9 ltr water type extinguishers (squeeze grip type). pvc braided tube/hose of length 400 mm. suitable for fittingwithin the thread of squeeze grip assembly of water type fire extinguisher capacity 9 litre (squeeze grip type).(as per sample), discharge tube washer for 9 ltr water type extinguishers (squeeze type). made of rubber. suitable to be fitted with discharge tube/hoseof water type fire extinguisher (squeeze grip type) capacity 09 litre.(as per sample), port tube for 9 ltr water type extinguishers (squeeze grip type). port tube/actuator should be made of aluminium. suitable to fit insidecap assembly of water type fire extinguisher capacity 9 litre (squeeze grip type) for release of water when activated. as per sample), siphon tube for 9 ltr water type extinguishers (squeeze grip type). siphon tube suitable for 9 ltr. water type extinguishers (squeezegrip type).(as per sample), cap assembly for 9ltr water type extinguishers (squeeze grip type). it should include a brass forged valve and a squeeze grip foractivation to facilitate the discharge of water. suitable to be fitted in 9l water type extinguishers (squeeze grip type).(as per sample), cap assembly washer for for 9 ltr water type extinguishers (squeeze

Hydromechanical Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Co-operative

State Government

State Government

corporations/Associations/Others

State Government

corporations/Associations/Others