Latest hydromechanical work Tenders | Government hydromechanical work Tenders

Central Government/Public Sector

CTN :39999763

21 Apr, 2025 NA

Bangalore - Karnataka

Tender For mechanical item - pb cable splitter (mech assy)

Central Government/Public Sector

CTN :40007518

22 Apr, 2025 NA

Bangalore - Karnataka

Tender For mechanical item - open end pop rivet dome head

Central Government/Public Sector

CTN :40007519

22 Apr, 2025 NA

Bangalore - Karnataka

Tender For mechanical item - spacer hex m/f-m4x8/m4x10,l-50,nylon

Central Government/Public Sector

CTN :40007532

22 Apr, 2025 NA

Bangalore - Karnataka

Tender For mechanical item - clamping profile 12x8 mm

CTN :39958827

21 Apr, 2025 3.84 Lacs

Nadia - West Bengal

Tender For corrigendum : procurement of flood fighting materials along with cutting cleaningofjungles along withclosesurveillance of the banks of river bhagirathi attarapur embankment durinng the monsoonperiod of theyear2025under thejurisdictionofranaghat irrigation sub div. - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same onembankments, clannels, filling depressions in requisite profile, levelling as per direction of the engineer-in-charge within a lead of (d) beyond 3.00 km and upto 4.00 km (this rate inclussive royalty @ rs.29.00 per m3, compensation @ rs.25.00 per m3 & cess @ rs.5.30 per m3 with the basic rate). assembled=rs. (229.00+29.00+25.00+5.30)=rs. 288.30, labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per irection of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or partthereof beyond the initial lead of 30 metre., dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts, cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge

CTN :39958770

21 Apr, 2025 2.87 Lacs

Ranaghat - West Bengal

Tender For corrigendum : supply of flood fighting materials with utilisation as an when required basis during the monsoon period 2025 for the jurisdiction of ranaghat irrigation section i under ranaghat irrigation sub-division ranaghat nadia. - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same onembankments, clannels, filling depressions in requisite profile, levelling as per direction of the engineer-in-charge within a lead of (d) beyond 3.00 km and upto 4.00 km (this rate inclussive royalty @ rs.29.00 per m3, compensation @ rs.25.00 per m3 & cess @ rs.5.30 per m3 with the basic rate). assembled=rs. (229.00+29.00+25.00+5.30)=rs. 288.30, labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per irection of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or partthereof beyond the initial lead of 30 metre., dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts, cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge

CTN :39958778

21 Apr, 2025 2.91 Lacs

Ranaghat - West Bengal

Tender For corrigendum : supply of flood fighting materials with utilisation as an when required basis for coming monsoon 2025 under the jurisdiction of ranaghat irrigation section ii under ranaghat irrigation sub division. - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same onembankments, clannels, filling depressions in requisite profile, levelling as per direction of the engineer-in-charge within a lead of (d) beyond 3.00 km and upto 4.00 km (this rate inclussive royalty @ rs.29.00 per m3, compensation @ rs.25.00 per m3 & cess @ rs.5.30 per m3 with the basic rate). assembled=rs. (229.00+29.00+25.00+5.30)=rs. 288.30, labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per irection of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or partthereof beyond the initial lead of 30 metre., dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts, cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge

CTN :40005571

28 Apr, 2025 NA

Vapi - Gujarat

Tender For supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki - 323.9 mm dia.

Central Government And Public Sector

CTN :39978436

01 May, 2025 34.81 Lacs

Kaiga - Karnataka

Tender For supply, fabrication, welding/joining, erection and testing of hdpe piping from kgs 3 and 4 to kaiga 5 and 6 area. - supply items (schedule-a), 100 nb equal tee sch 40 astm a 234 gr. wpb sml bw ansi b 16.9, 1oo nb sorf flange 150 # astm a 105 ansi b 16.5, 100 nb blind flange 150 # astm a 105 ansi b .16.5, 100 nb gate valve manual op. flange end 125/150 # sa 216 gr. wcb ansi b 16.34, 100 nb ball valve manual op. flange end 125 /150# hdpe, suit to 100 nb,sa 105, 150 # ansi b 16..5 back ring flange, flange end mechanical type flow totalizer 150# (range 150000 to 200000 cu. mtr.capacity) to suit to 100 nb sa 105 flange 150 #, ansi b 16.5. flow meter totaliser specification, dn-110 hdpe pipe is 4984 gr. pe 80 pn 6, dn-110 hdpe 90 degree elbow, is 4984 gr. pe 80 pn 6 as per is 8008, dn-110 pipe /stub end, 1s 4984 gr pe 80 pn 6 as per is 8008., 100 nb cs back ring flange astm a 105 as per ansi b 16.5 150#, dn-110 hdpe equal tee, is 4984 gr.pe 80 pn 6, as per is 8008, dn-50 hdpe cap, is 4984 gr. pe 80 pn 6, as per is 8008., hexagonal headed bolt, nut with washer 85 mm long is 1363 gr. 6.3 /is 3757 gr. 8.8, ismc 100 is 2062 , e 250 gr. a, 12 mm thick plate is 2062 , e 250 gr. br, 110 nb ms u clamp 25 mm wide x 3.5 mm thick, 100 nb m 12 u bolt is 2062 e 250 gr. a, m 10 x 100 hst/faz, 1.6 mm thk caf gasket 100 nb is 2712 gr. w/3, erection item (schedule-b), butt fusion welding / joining and laying of dn- 110 hdpe pipe, is 4984, grade pe 80, pn 6 both under ground and above ground., butt fusion welding / joining and erection of dn-110 90 degree elbow, hdpe, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of both end), butt fusion welding / joining and erection of dn-110 hdpe equal tee, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of three end), butt fusion welding / joining and erection of dn-110 hdpe pipe end /stub end is 4984, grade pe 80. pn 6, butt fusion welding/joining and erection of dn-50 hdpe cap is 4984 grade pe-80 pn-6, installation of 100 nb hdpe ball valve without welding., fabrication , erection , welding, inspection,surface cleaning & supply and application of hb chlorinated rubber zinc phospate primer paint in two coats to minimum 100 micron dft and supply and application of hb chlorinated rubber finish paint in two coats to 60 micron dft for cs structural steel support and components., installation of anchores m10 x 100 mm hst/faz including handling,scafolding,labour & tools., removing & reinstallation of precast concrete slab 0.3 m (l) x 1.350 m (w) x 0.1 m (t), excavation and backfilling of excavated trenches with the soil after completion of installation of pipe lines and testing including levelling/grading, compaction to the required level 1.5 m (d)x 0.8 m (w), sand bedding 50 mm depth x 400 mm width for underground hdpe piping including supply of sand., dismantling of existing dn-50 hdpe piping including breaking of existing cement concrete ( 0.7 cub.mtr) & pcc to be done after breaking and removing of existing cement concrete, including tools, labour & disposing of unservicable material as directed by eic, carefully removing the korean grass along with soil of 100 mm to 250 mm depth and 1500 mm width including replacing the same removed korean grass along with soil after laying hdpe line along with tools & tackles,watering of grass,dressing of area etc.in all complete as per direction of eic

Central Government/Public Sector

CTN :39985963

21 Apr, 2025 96.01 Lacs

Narsinghpur - Madhya Pradesh

Tender For custom bid for services - 02 year maintenance contract for hmv in ntpc chp gadarwara-line item 10.10: deptt <> deployment of technician & electrician(adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to investigate during machine breakdown, the cause of breakdown. to dismantling, repairing and replacing defective parts of breakdown machine. to inspect machine with oem engineer and finding solution to resolve problem. to maintaining the machine as per oem schedule to keep it in continuous operation. tech. (mech. & elect.) will have to report to their supervisor or ntpc representative daily. deployment of 02 hsw technician (01 mechanical & 01 electrical) per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.20: deptt <> deployment of automotive mechanic/electrician (adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to check all machines on daily basis. to servicing all machines as per oem schedule. to replace faulty parts. to checking machine dashboard and replacing or repairing faulty meters. to checking and maintaining starter motor, battery and alternator on daily basis. to set tension of track chain assembly of dozer and excavator. to report to their supervisor or ntpc representative daily. deployment of 02 sw (01 hmv automotive mechanic & 01 hmv automotive electrician) per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.30: deptt <> deptt <> deployment of junior technician (adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to grease the chassis/pin of all machines as per schedule. to check all types of oil, coolant in the machine on daily basis and topping up when short/less. to repair broken frames and bodies of machines by cutting, grinding and fabrication. to repair punctured tyres, and replace damaged tyres. to bring materials from ntpc store, keeping them organized in dozer shed store. to report to their supervisor or ntpc representative daily. deployment of 02 ssw junior technician per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.40: deptt <> deployment of helper(adl) deployment 02 usw helper to perform all supporting task (such as housekeeping, washing of equipment, picking up spare parts) as directed by the supervisor or eic. to report to their supervisor or ntpc representative daily. line item 10.50: opn of crane (>10 40 mt) (abcrn02gn702) 1. operation of mobile crane (such as rt-40, 11ton hydra) as per requirement during the general shift and extended hours anywhere as per requirement & as per instruction of engineer-in-charge. 2. checking and cleaning of mobile crane before starting of operation. 3. checking the water and diesel level in the vehicles on daily basis. 4. checking and guiding during diesel filling in the vehicles as per requirements. 5. visual inspection of the equipments, report to the site engineer or eic, defects if any. 6. operation of equipments as per site requirements in general shift. 7. parking the vehicles on proper location after completion of operation work. 8. any defects observed during operation to be reported immediately to eic. 9. check the machine daily as per the checklist and fill the checklist. 02 hsw operator with valid heavy mobile equipment driving license with minimum 03 years experience of h

Hydromechanical Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector