Latest ic socket Tenders | Government ic socket Tenders

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

CTN :45716595

13 Jul, 2026 4.50 Lacs

Najibabad - Uttar Pradesh

Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl

CTN :45592303

01 Jul, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of ece practical equipments - equipments for ece practices:, single output regulated dc variable power supply input voltage: 230v / 50hz ac. output voltage: (0 30) v dc. output current: (0 2) a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply input voltage: 230v/50 hz ac. output voltage: (0 30) v dc. output current: (0 2) a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display, function generator frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v overload protection. dc offset: 0 to 10 v adjustable. attenuation: 0 to 60 db., dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x)., digital ic trainer kit with breadboard +5 v dc, 1 a regulated power supply. 12 v dc/ 15 v dc, 200 ma regulated power supply. solderless breadboardwith minimum 840 tie-points,power distribution buses. zif (zero insertion force) ic socketsto accommodate 8 or 16 pinics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulse per press)., fpga trainer kit must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usbuart bridge, usb cable. user manual.

CTN :45592309

01 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of equipment items - dual output regulated dc variable power supplydual output regulated power supply- input voltage: 230v/50hzac- output voltage: (0 30v)dc- output current: (0 2a)dc- protection circuit: over voltage and over current protection, short-circuit protection- high efficiency: greater than 85%- low ripple and noise: less than 50 mv, digital storage oscilloscopebandwidth: 50 - 100 mhz.sampling rate: 1gs/s.channels: 2 (minimum)power supply: 100v 240v ac, 50-60 hzautomatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc.,horizontal scale: 5 ns/div 100 ns/div or equivalentvertical resolution: 8 bits (2 channels simultaneously)vertical sensitivity: 1 mv/div 10 v/div (at input)waveform math: +, -, x , , invert, fft etc.,waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface.7-inch color display or equivalentbasic trigger functions, digital ic trainer kit with breadboard5v dc, 1a regulated power supply 12v dc / 15v, 200 ma regulated power supplysolderless breadboard to accommodate 8 16-pin icszif (zero insertion force) ic socketssupports ttl and cmos icslogic io leds for output monitoring8 buffered led outputs8 debounced switch inputsttl clock: 1 mhzvariable clock generator: 0.5 hz to 50 hzsingle pulse output: 100 ms (buffered, positive and negative outputs)one seven-segment display with 4 bcd inputsbuilt-in logic probesbuilt-in logic switchesexperiments on basic logic gates, flip-flops, counters, and multiplexers, pcb prototype machinepcb prototyping & antenna fabrication systemmanual software copper cam & mach3 millresolution (x/y) 3.125 micro meterworking area (x/y/z)(mm)200x300x120 mmminimum width line & space in mm0.1 (4 mil) max travel speed (mm/sec)58 (2.28 ) drilling (mm), 0.2 -3.175 (8-125 mil)maximum drilling cycles/ min 50main axle power rate 300 wmain axle rotating speed 25000 rpmmax working speed 3500mm/minfeeding height 120 mmworking drive 0.02-0.05mmrepositioning accuracy 0.01-0.02mmsupported format standard gerber,dxf,excelloncapability of processing various materials - fr4, copperclad, acrylic, metal, aluminum and etc.,power - 220 v acweight - 52 kg

CTN :45354788

17 Jun, 2026 NA

Shekhapura - Bihar

Tender For bid to ras supply of arduino uno microcontroller , breadboard , jumper wires male female , resistors , led red green , capacitors , transistors , diodes , sensors , lcd , relay module , motors , power supply battery , multimeter , soldering kit , project work station , fpga trainer boards , logic analyzer , dual regulated power supply , arduino uno , stm dev board , pic development kit , raspberry pi , digital multimeter , dac trainer board , rtos trainer , soldering stations , lm analog temp sensor , ds digital temp sensor , ptrtd resistance temp detector , k type thermocouple , ir proximity sensor reflective ir , digital ir obstacle sensor , ir flame sensor , ir temperature sensor mlx90614 , mq two lpg smoke , mq three alcohol , mq six lpg butane , mq seven carbon monoxide , mq air quality , pir motion sensor , ultrasonic sensor , accelerometer , gyroscope , solderless breadboard full size , mini breadboard , jumper wires male male , jumper wires male female , jumper wires female female , ic socket eight pin , ic socket fourteen pin , ic socket sixteen pin , solar cell trainer kit , ujt as relaxation oscillator kit , scr characteristics kit , ldr , photo diode , phototransistor , semiconductor temperature coefficient trainer kit , logic gate trainer kit , ic trainer kit , measurement of steady state and transient response of rl rc and rlc circuits , frequency response of twin t notch filter and to study of active filter , study of single phase inverter trainer , to study the behaviour , determine the transient , to study of pid controller for simullatio n process , to study basic electric al trainer , to study single phase transformer , to obtain efficiency of a dc shunt machine , to obtain efficiency and voltage regulation of a single phase transform , to study dc series motor , make connection of dol starter , test the machines required , maxwells bridge trainer kit ) /bid number : gem/2026/b/7582907 * /dated: 27-05-2026 & & / bid document 1 / 44

CTN :45492749

24 Jun, 2026 NA

Billimora - Gujarat

Tender For supply of w , carbon resistor 82 ohm,1 by 4w , carbon resistor 820e 1 by 4 w , carbon resistor3k9 1 by 4 w , ceramic capacitor 0 point 1ufd,630v , ceramic capacitor 100pfd , crocodile pin pair 16amp red and black , di soldering wick 2 point 5mm x 1 mtr long copper , diac db 3 ,3 point 3volt , diode 1n 4001 , diode 1n 4007 , diode 1n 5408 , electrolyte capacitor 10 micro farad 16v , electrolyte capacitor 100 micro farad 10v , electrolyte capacitor 1000 micro farad 16v , electrolyte capacitor 1000 micro farad 25v , electrolyte capacitor 1000 micro farad 50v , electrolyte capacitor 100mfd 25 v , electrolyte capacitor 10mfd 25 v , electrolyte capacitor 10microfarade,25 v , electrolyte capacitor 120-150 mfd, 440volt ac , electrolyte capacitor 2 point 2 microfarade,63 v , electrolyte capacitor 2 point 5 mfd, 230 volt is 1709 ac , electrolyte capacitor 22 mfd 25 v , electrolyte capacitor 2200micro farad 25v , electrolyte capacitor 330 mf,25 v , electrolyte capacitor 4 point 7 microfarade,25 v , electrolyte capacitor 470 micro farad 10v , electrolyte capacitor 470 microfarade,10 v , electrolyte capacitor 470mfd,25 v , electrolyte capacitor 47mfd,25 v , female to female jumper wires , fet , flame sensor , gang capacitor 135pf to 500pf , glass fuse 1amp , glass fuse 2amp , glass fuse 6amp , hook up wire, 1 coil equal to 90 mtr length , hrc fuse , ic 4017 , ic 555 , ic 7400 nand gate , ic 7402 nor gate , ic 7404 not gate , ic 7408 and gate , ic 741 , ic 7432 or gate , ic 7486 exor gate , ic 7805 , ic 7809 voltage regulator , ic 7812 , ic gf200850 12a , ic lm317 , ic socket 16pin , ic socket 8pin , igbt , inductor 100mh , inductor 3 point 3 millhenry 1amp , inductor 500mh , inductor 8h , ir sensor with pot , ldr , led blue 3v 5mm , led flexible strip , led green 3v 5mm , led lamp holder for 5mm led , led red 3v 5mm , led white 3v 5mm , led yellow 3v 5mm , lithium ion-li-ioncoin cell battery , main code wire 1meter 2 pin , main code wire 1meter 3 pin , male to female jumper wires , male to male jumper wires , metal diode, 25a , metal film resistor 100ohm zero point 25 to zero point 5 watt , metal film resistor 100ohm zero point 25 watt , metal film resistor 100ohm zero point 5 watt , metal film resistor 100ohm 1w , metal film resistor 10kohm zero point 25 to zero point 5 watt , metal film resistor 10mohm zero point 25 to zero point 5 watt , metal film resistor 10mohm zero point 5 watt , metal film resistor 1kohm zero point 25 to zero point 5 watt , metal film resistor 1mohm zero point 25 to zero point 5 watt , metal film resistor 1mohm zero point 5 watt , metal film resistor 22k 1 point 2 w , metal film resistor 22kohm zero point 25 to 1 watt , metal film resistor 22kohm zero point 5 watt , metal oxide film resistor 10m 5 w , metal rectifier 15 a , mica capacitor , mosfet irf540 15volt , mosfet irfz44 , mq 3 gas sensor , p.c.b. 4inch x 4inch , paper capacitor , pcb 6inch x 4inch , plastic film capacitor 0 point 0100 mfd , potentiometer 100k , potentiometer 10k , potentiometer 1m , potentiometers 1 k 1 w , potentiometers 100 ohm 1 by 2 w , potentiometers 250 k ohm 1 w , potentiometers 470 ohm1 by 2 w , preset 10k , resistor 100 ohm, 10 watt , resistor 10kohm , resistor 10m ohm, 5watt , resistor 1k 10w , resistor 1k ohm, 10watt , resistor 2.2k ohm, 2 watt , resistor 220 ohm, 2 watt , resistor 47 ohm , 1 by 2 watt , resistor 47 ohm, 5watt , resistor 470 ohm , 1 by 2 watt , resistor 560e , 1 by 4 watt , resistor 684 //bid details 2 / 142 ohm, 2 watt , resistors 10,20,30,40,50,60 ohm , 1watt , scr tyn 604 , soldering flux 50grm , soldering flux wire 500grm , soldering stick 60 colon 40 , soldering wire 80 colon 20 250grm equal to 1 no , sound sensor , switch dpdt 5amp , tantalum capacitor 6 ponit 8 mfd 35v , thermister ntc , thermister ptc , toggle switch dpst 5amp , toggle switch spdt 5amp , toggle switch spst 5amp , touch sensor , transistor 2n2222 , transistor 2n3906 , transistor bc 107 , transistor bc 108 , transistor bc 148 , transistor bc

CTN :45328819

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : equipment items - dual output regulated dc variable power supply-input voltage : 230v/50 hz ac.output voltage : (0-30)v dc.output current : (0-2)a.dcprotection circuit : over voltage, over current and short circuit protection.high efficiency : greater than 85 %.low ripple and noise less than 50 mv.digital display, digital ic trainer kit with breadboard:+5v dc, 1 a regulated power supply. 12v dc / 15v dc, 200 ma regulated power supply.solderless breadboard with minimum 840 tie- points, power distribution buses.zif(zero insertion force)ic sockets to accommodated 8 or 16 pin ics.logic input and output leds for output monitoring.16 buffered led outputs.16 debounced switch inputsvariable clock generator: 0.5 hz to 50 hz.single pulse output : 100 ms(buffered,positive and negative outputs).one seven-segment display with 4 bcd inputs.built-in logic switches.manual clock: debounced push-button(one pulse per press)., digital storage oscilloscope-bandwidth: 50-100 mhz. sampling rate: 1gs/sec.channels: 2 (minimum). power supply: 100v 240v ac, 50-60 hz automatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc., horizontal scale: 5 ns/div 50 s/div or equivalent vertical resolution: 8 bits (2 channels simultaneously) vertical sensitivity: 1 mv/div 10 v/div (at input) waveform math: +, -, x , , invert, fft etc., waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface. c 7-inch color display or equivalent input impedance - 1 m 2%, // 20 pf accessories:2 xpassive probes (1x/10x), pcb prototype machine :manual software : copper cam & mach3 mill.resolution (x/y) : 3.125 micrometre.working area(x/y/z) : 200 x 300 x 120 mm.minimum width line and space : 0.1 mm (4 mil).maximum travel speed : 58 mm/sec(2.28 ).drilling range: 0.2 3.175 mm(8-125 mil).maximum drilling cycles : 50 cycles/minmain axle power rating : 300w.main axle rotating speed : 25000 rpm.maximum working speed : 3500 mm/min.feeding height: 120 mm.working drive : 0.02 0.05 mm.repositioning accuracy : 0.01 0.02 mm.supported formats : standard gerber, dxf, excellon.capability of processing various materials:fr4, copper clad, acrylic, metal, aluminium etc.power supply : 230v ac

CTN :45465678

19 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45475071

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for ece department - purchase, dual output regulated dc variable power supply input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v overload protection. dc offset: 0 to 10 v adjustable. attenuation: 0 to 60 db., dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x)., digital ic trainer kit with breadboard +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulse per press)., lvdt trainer kit ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual.

State Government

CTN :45214173

10 Jun, 2026 2.12 Lacs

Jaipur - Rajasthan

Tender For corrigendum : supply of 16 pin dil ic socket , 20 pin dil ic socket , 24 pin dil ic socket , 8 pin ic socket type , 40 pin dil ic socket

Ic Socket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government