Latest ic socket Tenders | Government ic socket Tenders

State Government

CTN :45706672

07 Jul, 2026 10.00 Lacs

Junagadh - Gujarat

Tender For erection & maintenance of ht,lt & tc under shapur sub division for hvds scheme work

State Government

CTN :45686148

02 Jul, 2026 19.65 Lacs

Kutch - Gujarat

Tender For tender for erection and maintenance of ht lt tc work in nd spa diss scp skjy si hvds and all scheme under gadhsisa so pr no : 863391

State Government

CTN :45686192

02 Jul, 2026 19.92 Lacs

Kutch - Gujarat

Tender For erection and maintenance of ht lt tc work in nd spa diss scp skjy si hvds and all scheme under mandvi town sdn pr no : 864366

State Government

CTN :45630085

10 Jul, 2026 15.00 Lacs

Botad - Gujarat

Tender For labour work for new erection & maintenance of ht lt & tc under hvds scheme for dhola sdn under gadhada division.

CTN :45592303

01 Jul, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of ece practical equipments - equipments for ece practices:, single output regulated dc variable power supply input voltage: 230v / 50hz ac. output voltage: (0 30) v dc. output current: (0 2) a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply input voltage: 230v/50 hz ac. output voltage: (0 30) v dc. output current: (0 2) a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display, function generator frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v overload protection. dc offset: 0 to 10 v adjustable. attenuation: 0 to 60 db., dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x)., digital ic trainer kit with breadboard +5 v dc, 1 a regulated power supply. 12 v dc/ 15 v dc, 200 ma regulated power supply. solderless breadboardwith minimum 840 tie-points,power distribution buses. zif (zero insertion force) ic socketsto accommodate 8 or 16 pinics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulse per press)., fpga trainer kit must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usbuart bridge, usb cable. user manual.

CTN :45592309

01 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of equipment items - dual output regulated dc variable power supplydual output regulated power supply- input voltage: 230v/50hzac- output voltage: (0 30v)dc- output current: (0 2a)dc- protection circuit: over voltage and over current protection, short-circuit protection- high efficiency: greater than 85%- low ripple and noise: less than 50 mv, digital storage oscilloscopebandwidth: 50 - 100 mhz.sampling rate: 1gs/s.channels: 2 (minimum)power supply: 100v 240v ac, 50-60 hzautomatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc.,horizontal scale: 5 ns/div 100 ns/div or equivalentvertical resolution: 8 bits (2 channels simultaneously)vertical sensitivity: 1 mv/div 10 v/div (at input)waveform math: +, -, x , , invert, fft etc.,waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface.7-inch color display or equivalentbasic trigger functions, digital ic trainer kit with breadboard5v dc, 1a regulated power supply 12v dc / 15v, 200 ma regulated power supplysolderless breadboard to accommodate 8 16-pin icszif (zero insertion force) ic socketssupports ttl and cmos icslogic io leds for output monitoring8 buffered led outputs8 debounced switch inputsttl clock: 1 mhzvariable clock generator: 0.5 hz to 50 hzsingle pulse output: 100 ms (buffered, positive and negative outputs)one seven-segment display with 4 bcd inputsbuilt-in logic probesbuilt-in logic switchesexperiments on basic logic gates, flip-flops, counters, and multiplexers, pcb prototype machinepcb prototyping & antenna fabrication systemmanual software copper cam & mach3 millresolution (x/y) 3.125 micro meterworking area (x/y/z)(mm)200x300x120 mmminimum width line & space in mm0.1 (4 mil) max travel speed (mm/sec)58 (2.28 ) drilling (mm), 0.2 -3.175 (8-125 mil)maximum drilling cycles/ min 50main axle power rate 300 wmain axle rotating speed 25000 rpmmax working speed 3500mm/minfeeding height 120 mmworking drive 0.02-0.05mmrepositioning accuracy 0.01-0.02mmsupported format standard gerber,dxf,excelloncapability of processing various materials - fr4, copperclad, acrylic, metal, aluminum and etc.,power - 220 v acweight - 52 kg

CTN :45354788

17 Jun, 2026 NA

Shekhapura - Bihar

Tender For bid to ras supply of arduino uno microcontroller , breadboard , jumper wires male female , resistors , led red green , capacitors , transistors , diodes , sensors , lcd , relay module , motors , power supply battery , multimeter , soldering kit , project work station , fpga trainer boards , logic analyzer , dual regulated power supply , arduino uno , stm dev board , pic development kit , raspberry pi , digital multimeter , dac trainer board , rtos trainer , soldering stations , lm analog temp sensor , ds digital temp sensor , ptrtd resistance temp detector , k type thermocouple , ir proximity sensor reflective ir , digital ir obstacle sensor , ir flame sensor , ir temperature sensor mlx90614 , mq two lpg smoke , mq three alcohol , mq six lpg butane , mq seven carbon monoxide , mq air quality , pir motion sensor , ultrasonic sensor , accelerometer , gyroscope , solderless breadboard full size , mini breadboard , jumper wires male male , jumper wires male female , jumper wires female female , ic socket eight pin , ic socket fourteen pin , ic socket sixteen pin , solar cell trainer kit , ujt as relaxation oscillator kit , scr characteristics kit , ldr , photo diode , phototransistor , semiconductor temperature coefficient trainer kit , logic gate trainer kit , ic trainer kit , measurement of steady state and transient response of rl rc and rlc circuits , frequency response of twin t notch filter and to study of active filter , study of single phase inverter trainer , to study the behaviour , determine the transient , to study of pid controller for simullatio n process , to study basic electric al trainer , to study single phase transformer , to obtain efficiency of a dc shunt machine , to obtain efficiency and voltage regulation of a single phase transform , to study dc series motor , make connection of dol starter , test the machines required , maxwells bridge trainer kit ) /bid number : gem/2026/b/7582907 * /dated: 27-05-2026 & & / bid document 1 / 44

State Government

CTN :45526711

30 Jun, 2026 30.00 Lacs

Jamnagar - Gujarat

Tender For line works for erection, maintenance & dismantling of overhead ht/lt line, t/c & ht/lt aerial bunch cable(hvds scheme) under sikka sub division under city-2 division, jamnagar.

CTN :45492749

24 Jun, 2026 NA

Billimora - Gujarat

Tender For supply of w , carbon resistor 82 ohm,1 by 4w , carbon resistor 820e 1 by 4 w , carbon resistor3k9 1 by 4 w , ceramic capacitor 0 point 1ufd,630v , ceramic capacitor 100pfd , crocodile pin pair 16amp red and black , di soldering wick 2 point 5mm x 1 mtr long copper , diac db 3 ,3 point 3volt , diode 1n 4001 , diode 1n 4007 , diode 1n 5408 , electrolyte capacitor 10 micro farad 16v , electrolyte capacitor 100 micro farad 10v , electrolyte capacitor 1000 micro farad 16v , electrolyte capacitor 1000 micro farad 25v , electrolyte capacitor 1000 micro farad 50v , electrolyte capacitor 100mfd 25 v , electrolyte capacitor 10mfd 25 v , electrolyte capacitor 10microfarade,25 v , electrolyte capacitor 120-150 mfd, 440volt ac , electrolyte capacitor 2 point 2 microfarade,63 v , electrolyte capacitor 2 point 5 mfd, 230 volt is 1709 ac , electrolyte capacitor 22 mfd 25 v , electrolyte capacitor 2200micro farad 25v , electrolyte capacitor 330 mf,25 v , electrolyte capacitor 4 point 7 microfarade,25 v , electrolyte capacitor 470 micro farad 10v , electrolyte capacitor 470 microfarade,10 v , electrolyte capacitor 470mfd,25 v , electrolyte capacitor 47mfd,25 v , female to female jumper wires , fet , flame sensor , gang capacitor 135pf to 500pf , glass fuse 1amp , glass fuse 2amp , glass fuse 6amp , hook up wire, 1 coil equal to 90 mtr length , hrc fuse , ic 4017 , ic 555 , ic 7400 nand gate , ic 7402 nor gate , ic 7404 not gate , ic 7408 and gate , ic 741 , ic 7432 or gate , ic 7486 exor gate , ic 7805 , ic 7809 voltage regulator , ic 7812 , ic gf200850 12a , ic lm317 , ic socket 16pin , ic socket 8pin , igbt , inductor 100mh , inductor 3 point 3 millhenry 1amp , inductor 500mh , inductor 8h , ir sensor with pot , ldr , led blue 3v 5mm , led flexible strip , led green 3v 5mm , led lamp holder for 5mm led , led red 3v 5mm , led white 3v 5mm , led yellow 3v 5mm , lithium ion-li-ioncoin cell battery , main code wire 1meter 2 pin , main code wire 1meter 3 pin , male to female jumper wires , male to male jumper wires , metal diode, 25a , metal film resistor 100ohm zero point 25 to zero point 5 watt , metal film resistor 100ohm zero point 25 watt , metal film resistor 100ohm zero point 5 watt , metal film resistor 100ohm 1w , metal film resistor 10kohm zero point 25 to zero point 5 watt , metal film resistor 10mohm zero point 25 to zero point 5 watt , metal film resistor 10mohm zero point 5 watt , metal film resistor 1kohm zero point 25 to zero point 5 watt , metal film resistor 1mohm zero point 25 to zero point 5 watt , metal film resistor 1mohm zero point 5 watt , metal film resistor 22k 1 point 2 w , metal film resistor 22kohm zero point 25 to 1 watt , metal film resistor 22kohm zero point 5 watt , metal oxide film resistor 10m 5 w , metal rectifier 15 a , mica capacitor , mosfet irf540 15volt , mosfet irfz44 , mq 3 gas sensor , p.c.b. 4inch x 4inch , paper capacitor , pcb 6inch x 4inch , plastic film capacitor 0 point 0100 mfd , potentiometer 100k , potentiometer 10k , potentiometer 1m , potentiometers 1 k 1 w , potentiometers 100 ohm 1 by 2 w , potentiometers 250 k ohm 1 w , potentiometers 470 ohm1 by 2 w , preset 10k , resistor 100 ohm, 10 watt , resistor 10kohm , resistor 10m ohm, 5watt , resistor 1k 10w , resistor 1k ohm, 10watt , resistor 2.2k ohm, 2 watt , resistor 220 ohm, 2 watt , resistor 47 ohm , 1 by 2 watt , resistor 47 ohm, 5watt , resistor 470 ohm , 1 by 2 watt , resistor 560e , 1 by 4 watt , resistor 684 //bid details 2 / 142 ohm, 2 watt , resistors 10,20,30,40,50,60 ohm , 1watt , scr tyn 604 , soldering flux 50grm , soldering flux wire 500grm , soldering stick 60 colon 40 , soldering wire 80 colon 20 250grm equal to 1 no , sound sensor , switch dpdt 5amp , tantalum capacitor 6 ponit 8 mfd 35v , thermister ntc , thermister ptc , toggle switch dpst 5amp , toggle switch spdt 5amp , toggle switch spst 5amp , touch sensor , transistor 2n2222 , transistor 2n3906 , transistor bc 107 , transistor bc 108 , transistor bc 148 , transistor bc

CTN :45328819

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : equipment items - dual output regulated dc variable power supply-input voltage : 230v/50 hz ac.output voltage : (0-30)v dc.output current : (0-2)a.dcprotection circuit : over voltage, over current and short circuit protection.high efficiency : greater than 85 %.low ripple and noise less than 50 mv.digital display, digital ic trainer kit with breadboard:+5v dc, 1 a regulated power supply. 12v dc / 15v dc, 200 ma regulated power supply.solderless breadboard with minimum 840 tie- points, power distribution buses.zif(zero insertion force)ic sockets to accommodated 8 or 16 pin ics.logic input and output leds for output monitoring.16 buffered led outputs.16 debounced switch inputsvariable clock generator: 0.5 hz to 50 hz.single pulse output : 100 ms(buffered,positive and negative outputs).one seven-segment display with 4 bcd inputs.built-in logic switches.manual clock: debounced push-button(one pulse per press)., digital storage oscilloscope-bandwidth: 50-100 mhz. sampling rate: 1gs/sec.channels: 2 (minimum). power supply: 100v 240v ac, 50-60 hz automatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc., horizontal scale: 5 ns/div 50 s/div or equivalent vertical resolution: 8 bits (2 channels simultaneously) vertical sensitivity: 1 mv/div 10 v/div (at input) waveform math: +, -, x , , invert, fft etc., waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface. c 7-inch color display or equivalent input impedance - 1 m 2%, // 20 pf accessories:2 xpassive probes (1x/10x), pcb prototype machine :manual software : copper cam & mach3 mill.resolution (x/y) : 3.125 micrometre.working area(x/y/z) : 200 x 300 x 120 mm.minimum width line and space : 0.1 mm (4 mil).maximum travel speed : 58 mm/sec(2.28 ).drilling range: 0.2 3.175 mm(8-125 mil).maximum drilling cycles : 50 cycles/minmain axle power rating : 300w.main axle rotating speed : 25000 rpm.maximum working speed : 3500 mm/min.feeding height: 120 mm.working drive : 0.02 0.05 mm.repositioning accuracy : 0.01 0.02 mm.supported formats : standard gerber, dxf, excellon.capability of processing various materials:fr4, copper clad, acrylic, metal, aluminium etc.power supply : 230v ac

Ic Socket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government