Latest indicator item Tenders | Government indicator item Tenders

CTN :45691314

07 Jul, 2026 NA

Raigarh - Chhattisgarh

Tender For supply of item 20.10 load cell indicator , item 30.10 junction box sp 2150 , item 10.10 load cell lc 233

State Government

CTN :45613922

03 Jul, 2026 3.58 Lacs

Surat - Gujarat

Tender For providing, supplying and installation with testing demo of additional laboratory equipment for aggregate, cement and mix-design at quality control sub division, rander, dist. surat.- providing and supplying & installation with testing demo of vicat needle apparatus for testing of initial, final seeting time & consistency of cement test. one complete set. confirm to 18:5513 , providing and supplying & installation with testing demo off vicat mould, , providing and supplying & installation with testing demo of vicat glass plate, , providing and supplying & installation with testing demo of le-chatler mould including two glass plates and lead weight as per is set of six., , providing and supplying & installation with testing demo of le-chater flack, , installation with testing demo of slump test apparatus with tamping rod 16 mm dia x 600 mm long graduated., , providing and supplying & installation with testing demo of humidity chamber refrigerated-inner 8.8-45x45x45 cm-92 liter for temperature and humidity control with over temperature protection audio alarm system, , providing and supplying & installation with testing demo of servo voltage stabilizer -3kva-single phase for humidity chamber., , providing and supplying & installation with testing demo of humidifire with controler digital-confirming ito indian standard codes, , providing and supplying & installation with testing demo of whatman fliter paper-40 for blain air permeability test apparatus for fineness of cement, confirming to indian standard codes., , providing and supplying & installation with testing demo of precision electronic balance-600 gmm 01 gm (10mg)-confimming to indian standard codes., , providing and supplying & installation with testing demo of cement morter cube mould-7.06 cm-for cement confirming to indian standard codes (18 10080, 84031), , providing and supplying & installation with testing demo of 90 micron is sleve, , providing and supplying & installation with testing demo of gauging travel 8 anch. (200 mm)-confirming indian standard codes., , providing and supplying & installation with testing demo of temperature meter concrete, , providing and supplying & installation with testing demo of room temperature meter or thermo hygrometer, , providing and supplying & installation with testing demo of tds meter pen type, , providing and supplying & installation with testing demo of ph meter - pen type, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-100ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-250ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-500ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-1000ml, , providing and supplying & installation with testing demo of standard weight box-8.8.-1 mg-200 gm-class f1 (with nabl calibration), , providing and supplying & installation with testing demo of buoyancy balance with electronic balance 10 kg x 0.1 gm, , providing and supplying & installation with testing demo of 1.) distance piece-50mm height-nos 2.) distance piece-30mm, , height-inos, , machine, , providing and supplying & installation with testing, , demo of electronic platform, , balance-100 kg-, , 10 gm platform size 600 x, , , , providing and supplying & installation with testing demo of g.j. tray 1000x 1000 x 50 mm confirming to indian standard codes., , providing and supplying & installation with testing demo of bnd- ordinary portland cement standard specific area (blaine) one set surface, , providing and supplying & installation with testing demo of wash bottle 1000ml, , providing and supplying & installation with demo of spatula testing, , providing and supplying & installation with testing demo of fil

CTN :45486249

22 Jun, 2026 40.75 Lacs

Kurukshetra - Haryana

Tender For purchase of lab equipment item for material testing laboratory as per nabl norms. - electronic balance 200 gm, accuracy 0.001 gm, standard weight box (stainless steel) 1 mg to 200 gm, variable flow type air permeability apparatus (blaine type)variable flow type air permeability apparatus (blaine type), whatman filter paper 40 (pkt. of 100 pcs), digital thermo hygrometer, mercury, stop watch digital 1/10 sec, electronic balance 1 kg capacity, graduated cylinder, length comparator, shrinkage bar mould (single), humidity chamber (heating), cement autoclave, le-chatelier water bath, steel scale 300 mm, le-chatelier mould, vicat apparatus with dashpot, vicat mould, electronic balance 6 kg 0.5gm readability., poking rod for cement, cube mould (70.6 mm), standard sand grade-i (25 kg bag), standard sand grade-ii (25 kg bag), standard sand grade-iii (25 kg bag), vibrating machine, automatic compression testing machine 500 kn, accelerated curing tank , gauging trowel, electronic balance 15 kg, cube mould (150 mm), automatic compression testing machine 2000 kn, vernier caliper digital 300 mm, measuring scale 300 mm, hot air oven 450 x 450x 450mm., water bath (28 ltr), electronic balance 10 kg capacity 1gm readability., concrete test hammer 10-100 proceq, anvil for concrete test hammer., ultrasonic pulse velocity apparatus, half cell potentiometer (rebar corrosion detector)

CTN :45365473

13 Jun, 2026 NA

Tuticorin - Tamil Nadu

Tender For purchase of lab equipments for ice dept - purchase of lab equipments for ice dept, i/p and p/i converter (iemcode:g002) i/p converter:(4 20) ma to (3 15) psi conversion. p/i converter:(3 15) psi to (4 20) ma conversion. air filter regulator (afr):20 psi regulated air supply. built-in current source. 3 digit led display for process indication. power supply: 230 v ac, 50 hz. mounting:bench-top / panel-mounted trainer configuration., level measurement using float and sight glass indicator- itemcode: g005specifications: sight glass level indicator. float type level indicator. power supply:230 v ac, 50 hz. monoblock pump:0.5 hp / 1 hp. sump tank., 8051develop ment board with usb/rs 232 cable to connect with computer (item code: g008)specifications: communication interface:usb / rs-232. on-board facilities:8 output leds,8 input switches,ldr,reed switch,8-bit adc,8-bit dac. display interfaces:seven-segment display,16 2 lcd interface. motor interfacing:stepper motor with driver,dc motor with h-bridge driver, 8 bit adc/dac interface board (item code: g009)specifications: thermistor / lm35 input in one channel. variable input (0 5) v in another channel. 8 leds for digital output indication.. necessary control signals provided for adc0809. 8-bit dac using dac0808. 8-bit digital input from controller. single-channel dac output:(0 10) v. power supply: 12 v or 15 v for analog circuitry, water level measurement trainer kit using capacitive type transducer (item code: g020) tabletop model with transparent acrylic tank of approximately 50 cm height. capacitive type level sensor for continuous level measurement. sensor output: (4 20) ma and/or (0 5) v with built-in signal conditioning. vertical pump for water circulation from sump to tank. flow control valve, overflow, and drainage arrangement. digital display for water level indication in cm. power supply: 230 v ac, 50 hz, single phase. in-built regulated dc power supply for sensor and control circuit. mounted on powder-coated ms frame for laboratory use. suitable for calibration and study of capacitive level measurement., flow measurement using electromagn etic flow meter(item code: g021)specifications: medium: water (salt water / bore well water). electromagnetic flow measurement: instantaneous flow rate and totalized flow indication. electromagnetic flow meter: integral mounted type. power supply: 90 260 v ac, 50 hz. minimum media conductivity: 15 s/cm. flow rate unit: m /hr. operating pressure: up to 10 kg/cm . electrode material: ss-304 / ss-316 / ss 316l. lining material: ptfe / neoprene / hard rubber / pfa. line size: 15 nb 25 nb. flow range: 0.1 10 m /hr. connection type: flanged. display: digital indication for flow rate and totalized flow. water pump: submersible type, 230 v ac, 50 hz. water tank: approximately 20 25 liters capacity. flow control valve provided. drain valve and overflow arrangement provided. mounted on powder-coated ms frame suitable for laboratory use.

Central Government / Public Sector

CTN :44734258

30 Apr, 2026 17.88 Lacs

Kochi - Kerala

Tender For corrigendum : supply of supply, installation and commissioning addressable fire alarm panel- item schedule 1 , supply, installation and commissioning loopcard - item schedule 2 , supply, installation and commissioning cpu - item schedule 3 , supply installation and commissioning power supply unit - item schedule 4 , supply, installation and commissioning repeater panel - item schedule 5 , fire alarm panel re- programming - item schedule 6 , graphic software updating and programming - item schedule 7 , supply, installation and commissioning addressable fire alarm panel - item schedule 8 , supply, installation and commissioning loopcard - item schedule 9 , supply, installation and commissioning cpu - item schedule 10 , supply, installation and commissioning power supply unit - item schedule 11 , supply, installation and commissioning addressable fire alarm panel - item schedule 12 , supply, installation and commissioning cpu - item schedule 13 , supply, installation and commissioning loopcard - item schedule 14 , supply, installation and commissioning power supply unit - item schedule 15 , supply installation and commissioning of conventional fire alarm panel with 24 zone with repeater panel - item schedule 16 , supply, installation and commissioning of conventional fire alarm panel with 16 zone with repeater panel - item schedule 17 , supply installation and commissioning of gas release panel - item schedule 18 , supply of multi-criteria detector with base - item schedule 19 , supply of manual call point- item schedule 20 , supply of hooter cum strobe- item schedule 21 , supply of fcm-fcm-1- item schedule 22 , supply of fmm-fmm-1 - item schedule 23 , supply of isolator module- item schedule 24 , supply of frm-frm-1 - item schedule 25 , supply of response indicator - item schedule 26 , supply of 360w 24v 15a smps -with inbuilt cooling fan- item schedule 27 , supply of manual call point - item schedule 28 , supply of multi-criteria detector - item schedule 29 , supply of manual call point- item schedule 30 , supply of hooter- item schedule 31 , supply of response indicator - item schedule 32 , supply of multi-criteria detector-system sensor - item schedule 33 , supply of manual call point with chain and hammer - item schedule 34 , supply of hooter - item schedule 35 , supply of strobe - item schedule 36 //bid details 2 / 36

CTN :44726681

08 Apr, 2026 2.29 Lacs

Ajmer - Rajasthan

Tender For supply of equipment and other materials to the lab operated at ganj godown municipal corporation, ajmer. - supply of core cutting machine (diesel/petrol) having specifications max core diameter 200 mm, power source diesel engine, drilling depth 600 mm, motor power 7.5 kw, suitable material concrete, asphalt, rcc, brick, operation mode semi automatic, having arrangement of water supply for test and fitted on wheels. , supply of compression testing machine, 2000kn digital, usage/application cube testing least count in kn 1, frequency 50 hz, automation grade automatic, weight up to 200 kg, motor voltage 240 to 440 v. , supply of core cutting instrument for soil density testing cutter: steel cylinder, 100mm internal diameter, 127.3mm long. accessories: steel dolly (25mm high), rammer. , supply and installation of bitumen testing machine bitumen content determination in bituminous mix having specification capacity 1500 gm, phase 1 phase, frequency 50-60 hz, voltage 220-240v, power source electric. , supply of steel trays having diamention 450 x 350 x 75 mm and heavy-gauge metal (often 18-22 gauge) with reinforced, polished or smooth surface. , supply of rapid moisture meter as per is 12175 specification. including all accessaries. , supply of rebound hammer it should consist of a spring controlled mass which slides on a plunger within a tabular housing, impact energy = 2.25 nm. , supply of scoop ss stainless steel with capacity 500 gm. and 1kg. , supply of digital laser distance meter , supply of vicat apparatus

CTN :44584232

29 Mar, 2026 2.29 Lacs

Ajmer - Rajasthan

Tender For corrigendum : गंज गोदाम नगर निगम, अजमेर में संचालित लैब में उपकरण व अन्य सामग्री सप्लाई का कार्य। - corrigendum: work of supply of equipment and other materials in the lab operated in ganj godown municipal corporation, ajmer - supply of core cutting machine (diesel/petrol) having specifications max core diameter 200 mm, power source diesel engine, drilling depth 600 mm, motor power 7.5 kw, suitable material concrete, asphalt, rcc, brick, operation mode semi automatic, having arrangement of water supply for test and fitted on wheels., supply of compression testing machine, 2000kn digital, usage/application cube testing least count in kn 1, frequency 50 hz, automation grade automatic, weight up to 200 kg, motor voltage 240 to 440 v., supply of core cutting instrument for soil density testing cutter steel cylinder, 100mm internal diameter, 127.3mm long. accessories : steel dolly (25mm high), rammer., supply and installation of bitumen testing machine bitumen content determination in bituminous mix having specification capacity 1500 gm, phase 1 phase, frequency 50-60 hz, voltage 220-240v, power source electric., supply of steel trays having diamention 450 x 350 x 75 mm and heavy-gauge metal (often 18-22 gauge) with reinforced, polished or smooth surface., supply of rapid moisture meter as per is 12175 specification. including all accessaries., supply of rebound hammer it should consist of a spring controlled mass which slides on a plunger within a tabular housing, impact energy = 2.25 nm., supply of scoop ss stainless steel with capacity 500 gm. and 1kg., supply of digital laser distance meter, supply of vicat apparatus

State Government

CTN :44560347

04 Apr, 2026 NA

Jharsuguda - Odisha

Tender For supply of quality lab items - digital compression testing machine, slump test apparatus, standard is sieves set (gi 450mm dia), standard is sieves set (brass 200mm dia), hot air oven, electronic weighing balance -100kg, electronic weighing balance -30kg, electronic weighing balance -600g, aggregate impact testing machine, aggregate crushing value apparatus, elongation gauge 350mm x 40mm, flakiness gauge 310mm x135 mm, electrical sieve shaker, water bath, concrete baby mixture machine, concrete vibrating table, cement mortar cube vibrating, machine, cement mortar cube vibrating, table, bulk density, container(30kg,15kg,3 kg), density basket, concrete test hammer, pocket concrete penetrometer, cube mould (150x150x150mm), cube mould, (70.6x70.6x70.6mm), vicat apparatus, sp. gravity test bottle, pycnometer bottle, le chartlier apparatus, hot plate, wheel barrow 1 cft capacity, los angeles abrasion testing, machine, flow table apparatus for scc, v- funnel apparatus, u shape box apparatus, l box apparatus, proctor compaction mould, (light), proctor compaction mould, (heavy), proctor rammer - 4.9 kg., heavy, proctor rammer - 2.6 kg light, 100mm dia sand pouring, cylinder, 200mm dia sand pouring, cylinder, 100mm dia core cutter, apparatus, liquid limit device, plastic limit sets, soil cone penetrometer, rapid moisture metter, soil riffler divider/splitter, soil hydrometer, pycnometer bottle, bitumen extractor, moisture can, universal automatic compactor, digital vernier caliper, digital thermometer, digital hygrometer, digital ph meter, measuring cylinder - glass -, 100 ml, measuring cylinder - plastic -, 500 ml., measuring cylinder - plastic -, 250 ml., jug measuring cylinder -, plastic-1000ml, measuring tape steel - 5 mtr., sprit level 300mm, gauging trowel 200mm, gauging trowel 150mm, mason trowel (big size), finishing trowel / gurumala, scoops - 2000gms, gi tray (1m x1m), gi tray, enamel trays, enamel trays, chisels 300mm long, 0.5 kg hammer, spatula 300mm long, straight edge 300mm long x, 5mm thick, nylon brush, wash bottle 500ml ldpe, plastic, asbestas hand gloves sets, bitumen cleaning agent, benzine, standard sand (grade 1,2,3) -, 25 kg each

Indicator Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

State Government