Latest infrastructures work Tenders | Government infrastructures work Tenders

State Government

CTN :45051851

18 Jun, 2026 NA

Bilaspur (Hp) - Himachal Pradesh

Tender For corrigendum : e tender for the renewal and replacement of damaged retaining wall and stone masonry work of tl no 3 and 4 of 220 kv bhakra jamalpur double circuit line

corporations/Associations/Others

CTN :45501926

23 Jun, 2026 12.47 Lacs

Palanpur - Gujarat

Tender For construction of stone masonry protection wall for revetment work of 220kv tharad-thavar line 01 & 02 tower line location no. 149, village: malupur, ta: tharad under am division tharad under palanpur circle

Central Government And Public Sector

CTN :45475213

29 Jun, 2026 33.77 Lacs

Alibagh - Maharashtra

Tender For supply of material for the work of mc and ew (cons) to restoration of church and convent of the augustinians at agarkot tal, alibag, dist-raigad. as specified in the boq. - description of works, supply of granular double screened river sand, in shape, free from silt and dust, incluidg all charges and stacking at work site etc complete and as directed by work incharge., supply of surkhi free from dust and silt including all charges stacking at work site etc. complete and as directed by work incharge., supply of un-slaked lime best quality katni m.p. quarry including conveyance charges and stacking at work site etc. complete and directed by work incharge., supply of brick jelly free from dust and silt including all charges and stacking at work site etc. complete and directed by work incharge., supply of jagerry at work site i.e. inside the monument etc. complete and directed by work incharge., supply of hirda at work site i.e. inside the monument etc. complete and directed by work incharge., supply of gum at work site i.e. inside the monument etc. complete and directed by work incharge., supply of new laterate stone size not less than 0.50x0.45x0.20 mtr including all charges and stacking at work site i.e. inside the monument etc. complete and directed by work incharge., supply of u.c.r. masonry not less than of size 0.25x0.25 cm obtained from approved quarry including all charges and stacking at work site i.e. inside the monument etc. complete and directed by work incharge., hiring of wedged lock type tubular scaffolding for erecting all around the monument up to a height of 10 to 25 mtr for execution of work for 5 months etc. complete and directed by work incharge.

CTN :45483238

16 Jun, 2026 91.79 Lacs

Delhi - Delhi

Tender For up-gradation of various type of h.m. bungalow under 3/e sub division, teen murti house, new delhi during 2026-27 (sh: stone masonry, barbed wire fencing and other miscellaneous work to protect vacant land from encroachment at vinay marg

Central Government/Public Sector

CTN :45440462

26 Jun, 2026 40.00 Lacs

Siliguri - West Bengal

Tender For repair to stone masonry retaining wall and other connected maint works in aor of kitpi under ge 859 ews - 8866 nature of work :repair to stone masonry, retaining wall and other connected maint works in aor of kitpi under ge 859 ews.

CTN :45442671

19 Jun, 2026 10.00 Lacs

Palakkad - Kerala

Tender For material supply for works in mgnregs action plan - material supply for mgnregs individual and common asset creation - stone aggregate:40mm nominal size, stone aggregate:20mm nominal size, stone aggregate:10mm nominal size, stone aggregate:06mm nominal size, course sand(zone3), portland cement, concrete mixer, vibrator, stone for masonry work, twisted steel/deformed bars, structural steel such as tees,angles,channels and r.s joists, second class kail wood in planks, second class kail wood in scantling, wall form panel 1250*450mm, corner angle 45*45*5mm 2.5long, column clamp 450*1070mm, prop 2m(2-3.5m), laterate stone of size 40*20*15cm, solid block of size 30*20*15cm, mild steel plates, mild steel rivets, flats up to 10mm in thickness, 20 mm dia.holding down bolts, mild steel sheets for tanks, galvanised wire mesh, iron pintels including welded pin, mild steel sheets with bolts and nuts, mild steel hooks, gi trafford profile sheet 0.35mm thick, galvanised steel jor l hooks 8 mm dia, galvanised steel bolts and nuts 6mm dia and 25mm long round head with slots, wire nails, fine sand, pvc pipe 63 mm outer dia., pvc bend 63 mm dia., pvc pipe 110mm outer dia., pvc elbow 63 mm dia, pvc tee 63*63*63 mm dia, pvc end cap 63 mm dia, pvc reducer 63*50mm dia, pvc pipe 160mm outer dia., gi pipes 50 mm dia., gi pipes 40 mm dia, quarry waste, precoated galvanised plain ridge, vitrified floor tile 60*60cm, welding by electric plant, hire charge of 10hp engine and pump set, diesel oil, 200 mm aluminium aldop, pvc socket/coupling 63 mm dia, polythene water storage tank, red oxide zinc chromate primer, deharadun white lime, smooth wheeled roller 8 to 10 tonne, water tanker 5 to 6 kl capacity, interlocking c.c. paver block (80 mm thick, m-30), sundries

corporations/Associations/Others

CTN :45444290

15 Jun, 2026 8.37 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of building in bm-ii division during 2025-26 sh repairing of main gate building name plate stone masonry and other allied civil work at chanakya bhawan complex chanakyapuri new delhi

State Government

CTN :45425159

14 Jun, 2026 50.00 Lacs

Baran - Rajasthan

Tender For all kind civil construction goods supply for gram panchayat all scheme for fy 2026-27- peamet p.p.c. , so/gravel , gravel local/local , 40mm grit of stone (broken from crusher) (yoids kart 1/11) , 20mm grit of stone (crusher broken) , stone 12/10/6mm grit (crusher broken) , gravel (yoids cut 1/6) , brick (22.5 x 11 x 7.50 cm) i st class , masonry berda stone (rr) , ditch soling stone (23cm height for road/ditch work) , sedstone (dpc, sill, coping, lintel, tand, almirha etc) 25-40mm thick , unpolished rough cotta stone up to 900 sq. cm , polish kota stone (one side polished) up to 900 sq. cm , cement interlocking block m-30grade, 60mm thick , cernent interlocking block m-30grade, 80mm thick , iron (for tor steel fe 415/500 reinforcement) , widing wire 18 gauge , konia iron/chocor rebar/leaf/ angle iron , enamel paint , distemper (water bound) , g.i. blanket 22 gauge (0.80 mm) , r.c.c. np3 tum pipe fear collar 1000mm dia , r.c.c. np3 tum pipe with collar 600mm dia , p.v.c. passenger tank with cover ((conforming to is:12701-1989) , class i (fly ash brick , other building materials

CTN :45161541

08 Jun, 2026 50.00 Lacs

Palakkad - Kerala

Tender For corrigendum : supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, stone aggregate(single size): 10 mm nominal size, solid blocks of size 10x20x15cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, red oxide zinc chromate primer, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, fine sand (zone iv), galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, mild steel hot finished welded type, welding by electric plant, average rate of mild steel round bars for reinforcements, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick

CTN :45416190

11 Jun, 2026 30.00 Lacs

Palakkad - Kerala

Tender For ananganadi grama panchayath ,vendor selection for supply of various mterials for mgnregs - quarry waste, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, fine sand (zone iv), coarse sand (zone iii), gravel 5mm to 10mm, stone for masonry work, portland cement, m.s. tube 40 mm dia, mild steel tubes hot finished welded type, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, mild steel sheets with bolts and nuts to rest on pintels, iron pintels including weldded pin, mild steel sheets for tanks, mild steel hooks, mild steel plate, mild steel tubes electric resistant or induction butt welded, welding by electric plant, wire nails, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, flats up to 10 mm in thickness, galvanised wire mesh of average width of aperture 1.4 and nominal dia.of wire 0.63 mm, g.i trafford profile sheet 0.35mm thick, precoated aluminium traffored sheet 0.450 mm thick, structural steel such as tees,angles,channels and rs joists, stainless steel screws 50 mm, red oxide zinc chromate primer, precoated galvanised steel plain ridges, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates, g.i pipe 40mm dia, gi plain washer thick, twisted steel/deformed bars, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charge of 10 hp engine and pump set - materials, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), adjustable span eso+si (2.35-3.40), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, solid blocks of size 30x20x20cm, solid blocks of size 30x20x15cm, hollow blok of size 40x20x10cm, interlocking c.c. paver block (80 mm thick, m-30), pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 25 mm outer dia . 12 kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 20 mm outer dia 10 kfg/cm2, pvc pipe 63 mm outer dia . 4kgf/cm2, pvc pipe 32 mm outer dia 6kgf/cm2, pvc pipe 40 mm outer dia. 6kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm2, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc pipe 160 mm outer dia. 4kgf/cm2, pvc elbow 75 mm dia, pvc 45 degree elbow 75 mm dia, pvc socket/coupling 75 mm dia, pvc reducer 63x50 mm dia, pvc vent cowl 75 mm dia, vitreous china orrisa type w.c. pan size 580 mm, brass stop-cock 15 mm dia, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type water closet, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, c.i. bracket for wash basin and sinks, polyethylene water storage tank with cove

Infrastructures Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government