Latest inner race Tenders | Government inner race Tenders

State Government

CTN :42021048

08 Oct, 2025 41.04 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement of m/s l and t mhi power turbine generators private limited make turbine casing bolts installed at hip turbine of 2x660 mw,ph-ii, sstpp,dongalia

corporations/Associations/Others

CTN :41764135

07 Oct, 2025 11.92 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of miscellaneous control and instrumentation items for btps, obra. - lubricator air filter with pressure gauge max. inlet pr. 15kg/cm2 outlet pr. range: 0-10kg/cm2 connection: 3/4" npt, manual drain 40micron sintered bronze/ metal bowl filter element, lubricator air filter with pressure gauge max. inlet pr. 15kg/cm2 outlet pr. range: 0-10kg/cm2 connection: 3/4" npt, manual drain 40micron sintered bronze filter element, stub for steam line and w.o. outlet bfp (as per sample), thermowell for steam / water line and w.o. (as per sample), thermocouple k-type duplex with head l-400mm od-19mm, k- type thermocouple od-6mm l-320mm bsp (m), k- type without head connation thermocouple for boiler/ turbine metal temperature measurement l-15mtr, od-6mm, rtd (prt-100*ohm*) thermocouple type along with thermowell head connection 320mm, od-6mm duplex bsp, rtd (prt-100*ohm*) capsule type thermocouple along with thermowell head connection l-20mm, od-4mm, (20x10) & od-3mm (5 nos) duplex type m&f adjust, k- type thermocouple od-6mm l-400mm bsp (m), pa fan temp. switches 0-120 deg. c1. dial size: 150 mm normal dia, white back ground, black marking2. range: 0 120 c3. case: weather proof to ip: 65 as per is:13947, die cast aluminium, bezel ring4. stem: 10 mm dia in ss 316, total stem length-200 mm5. connection: 3/4" npt(m) gland table in ss3046. capillary: ss 304 covered, 10 meter long solid drawn7. accuracy: 1% of fsd for indication & 2% of fsd for switching8. over range: 120 % of fsd9. window: acrylic10. contacts: 2spst contact, both normal op to close on rise of temperature rated 30 va, 240 v ac., temperature switch: fd fan stem length 175mm, 0 120 deg. c with sleeve zero adjustment at outside the casing along with fitting.tech. specification: -1. dial size 100 mm nominal dia, white back ground, black marking.2. range 0 120 deg.c.3. case weather proof p: 65 as per is: 2147, die cast aluminium with screwed aluminium, bezel ring.4. stem 10 mm dia in ss 316, total stem length-175 mm.5. connection 1/2" npt (m) gland adjustable in ss304.6. capillary ss 304 covered + pvc coating, 03 meter long.7. accuracy of fsd for indication 2% of fsd for switching.8. over range 120 % of fsd.9. window acrylic.10.contacts 1spst contact, both normal open to close on rise of temperature rated 30 va, 240 v ac., temperature switch stem size 300mm for id fan temperature switch: stem length 300 mm, 0 120 deg. c with sleeve zero adjustment at outside the casing along with fitting.other tech. specification: -1. dial size 100 mm normal dia, white back ground, black mar 2. range 0 120 deg. c.3. case weather proof to ip: 65 as per is: 2147, die cast aluminium with screwed, bezel ring.4. stem 10 mm dia in ss 316, total stem length-300 mm.5. connection 1/2" npt (m) gland adjustable in ss304.6. capillary ss 304 covered with coating, 03 meter long.7. accuracy 1% of fsd for indication 2% of fsd for switching.8. over range 120 % of fsd.9. window acrylic.10. contacts 1 spst contact, both normal open to close on rise of temperature rated 30 va, 240 v ac, temperature switch stem size 150mm temperature switch: stem length 150 mm, 0 200 deg. c with sleeve zero adjustment at outside the casing along with fitting.other tech. specification:1. dial size 150 mm normal dia, white back ground, black marking2. rang 200 deg. c3. case weatherproof to ip: 65 as per is:2147, die cast aluminium with screwed, bezel ring4. stem 10 mm dia in ss 316, total stem length-150 mm5. connection 1/2" npt(m) gland adjustable in ss3046. capillary ss 304 covered with pvc coating, 03 met ng7. accuracy 1% of fsd for indication 2% of fsd for switching8. over range 120 % of fsd9. window acrylic10. contacts 1spst contact, both normal open to close on rise of temperature rated 30 va, 240 v ac, digital ind 4 digit dual channel 138x32mm, digital ind 4 digit single channel 138x32mm, 3 nos.)

CTN :42086462

13 Oct, 2025 NA

Multi City - Multi State

Tender For supply of set of step size racers for axle box bearing cru-150 of 3 phase locomotives as per rdso smi no.rdso/2007/els/smi/0246 rev.-2, dated- 15.01.2018 or latest if any. one set consisting of 04 items as below: - (1) lipped inner racer - 01 no. /set (2) plain inner racer -01 no. /set. (3) angle ring (loose lip) - 01 no. /set. (4) end cap - 01 no. /set. note: material to be supplied by rdso approved source only as per rdso item id: 3100104(axle box bearing for wag9/wap7 locomotives).

CTN :42090474

14 Nov, 2025 NA

Multi City - Multi State

Tender For supply of set of axle box bearing component for wag-9 loco. one set comprising of 02 items - (1)lipped inner racer to type no.- rb5080 of m/s. nei or cru-150 of m/s. skf or similar = 6 nos./set, (2) plain inner racer to type no.- rb5080 of m/s. nei or cru-150 of mis. skf or similar = 6 nos./set. [ warranty period: 30 months after the date of delivery ]

CTN :41956626

10 Oct, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of turbine bearing fitted keys---st020330152- parallel key drg.no.1050109000-0-17 , st020280038- fitted key for hpt front journal bearing d250x180 - brg no.1 drawing and part no. 1160418000 - 38 , st020280039- fitted key for hpt front journal bearing d250x180 -brg no.1, drawing and part no. 1160418000 - 39 , st020280040- fitted key for hp-ip journal cum radial thrust bearing d380x290 -brg no.2 drawing and part no. 117 0327000 - 12 , st020280041- fitted key for ip-lp journal bearing d450x450 brg no.3 drawing and part no. 11181841000 - 18 , st020280042- fitted key. for ip-lp journal bearing d450x450 -brg no.3 drawing and part no. 11181841000 - 19 , st020280043- fitted key for lpt rear journal bearing d500x450 -brg no.4, drawing and part no. 1181402000 - 36 , st020280044- fitted key. for lpt rear journal bearing d500x450 brg no.4, drawing and part no. 1181402000 - 37 , st020330106- thrust pad for hp casing assembly, drawing no. 1050109000 and part no.29 , st020330105- thrust pad for hp casing assembly, drawing no. 1050109000 and part no.30

Central Government / Public Sector

CTN :42032186

22 Oct, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of set of inner racer for axle box of wag9 locomotives.

State Government

CTN :41836918

30 Sep, 2025 1.56 Lacs

Raichur - Karnataka

Tender For procurement of inner race & coupling pin

Central Government / Public Sector

CTN :41992025

06 Oct, 2025 NA

Angul - Odisha

Tender For corrigendum : supply of kit of normal size roller bearing of nei make with thrust pad comprising of-- (i) thrower-ref.-3= 1 no. (ii) normal size inner racer of rb 5020= 2nos. (iii) normal size inner distances piece-ref.-4= 1 no.(iv) clamping plate-ref.23= 1 no. to nei's drg. no.- x 171for wag7 locos. firm's offer: each set will consist of:(1) thrower to nei drg. no.x-207 rev nil or latestpart no. 3= 1 no. (2) plain innerrace rb5020 to neidrg. no.x-207 rev nil or latest= 2 nos. (3) innerdistance piece to nei drg. no. x-207 rev nil or latestpart no. 4= 1 no. (4) clamping plate to nei drg. no. x-207 rev nil or latest part no. 23= 1 no. ,make brand -nbc. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :41964707

13 Oct, 2025 71.09 Crore

Birsinghpur - Madhya Pradesh

Tender For procurement of new lp turbine bladed rotor and inner-inner casing of bhel make lp turbine machine sr. no.10536 a 111 01 for 1x500 mw unit at sgtps, mppgcl, birsinghpur.

CTN :41967535

13 Oct, 2025 89.91 Lacs

Khurja - Uttar Pradesh

Tender For tender for supply of blower casing , drive side end cover , non-drive side end cover , drive rotor with shaft , non drive rotor with shaft , timing gear (2 nos/set) , gear lock washer , gear lock nut , oil splasher , spring dowel for oil splasher , bearing housing , hex. bolt for bearing housing , bearing stopper , o ring for bearing housing , gear spacer (gear side) , spacer for inner race (gear side) , locked bearing- 2 nos , floated bearing (nde)- 2 nos , floated bearing (nde) (ds)- 1 no (6 nos/set) , floated bearing (de) (ds)- 2 nos , inner circlip , condensate sealing ring , shaft sleeve , shaft sleeve (de) , shaft seal/piston ring , oil thrower , oil thrower (de) , o ring for oil thrower , o ring for oil thrower (de) , o ring for shaft sleeve , o ring for shaft sleeve (de) , disc spring , disc spring holders , oil flinger , key for oil flinger , oil seal bush , o ring for oil seal bush , oil seal (de) , lock nut (de) , oil seal carrier , key for pulley , lock washer for pulley , lock bolt for pulley , filling plug , drain plug , oil level indicator , hex. bolt for gear cover to end cover , condensate sealing plug , hex. bolt for casing to end cover , dowel for casing to end cover , hex. bolt for pulley cover to end cover , dowel for pulley cover , bearing lock plate (nds) (de) , suction filter element , suction silencer , discharge silencer , non return valve , pressure relief valve , v belts , motor pulley (drive) , blower pulley (driven) , hex. bolt for locking pulley , lock washer for pulley , key for pulley , lock nuts for lead through shaft seal , lead through shaft seal , oil seal , sealing bracket , drive end bearing , - locked bearing (n.d.e.) , bearing (d.e) (n.d.e.) , pulley cover , key for oil flinger , drain plug , oil flinger (al) , distance sleeve (de) long shaft , oil thrower (de drive shaft) for long shaft , drive side end cover , shaft sleeve (d.e) for long shaft , piston ring , dowel for pulley side end cover & casing , drive shaft with rotor , dowel for gear side end cover & casing , shaft sleeve , condensate sealing ring , internal circlip , distance piece (gear side) , oil splasher (ms) , spring dowel , gear cover , gear lock nut , gear lock washer , timing gear (2 nos/set) , hex. bolt for bearing lock plate , bearing stopper , hex. bolt for gear side end cover & casing , oil thrower non drive side , non-drive side end cover , casing , non-drive rotor with shaft , hex. bolt for pulley side end cover & casing , filling plug , oil thrower drive end , non drive side (short shaft) , bearing lock plate (de) (nds) , hex. bolt for lock plate for inner race (nde) , oil level indicator assembly , counter sunk bolt & lock plate for outer race , hex. bolt for carrier , o ring for shaft sleeve (d.e) long shaft , o ring , suction filter element , suction silencer , discharge silencer , non return valve , pressure relief valve , v belts , motor pulley (drive) , blower pulley (driven) , bare shaft tri-lobe blower model rh-200ac , bare shaft tri-lobe blower model rm-100ac

Inner Race Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government / Public Sector

State Government

Central Government / Public Sector

State Government