Latest inner race Tenders | Government inner race Tenders

CTN :43528762

21 Jan, 2026 NA

Multi City - Multi State

Tender For supply of belt 8pk 1866 mt610,male coupling 1by 4bsp,air filter outer,air filter inner,water separator fuel filter,engine fuel filter,transmission filter,hydraulic oil filter,side cutter lefthand,side cutter right hand,link track rod,stake nut,seal,taper roller bearing,taper roller bearing,master cylinder,inner race bearing,bush,pin pivot,slew ram seal kit,stabiliz er seal kit,braek friction plate,break counter plate,needle roller bearing,ring kit,hose 10 bsp hp 790mm b,hose 10 bsp hp 2650mm b,hose 10 bsp hp 2520mm b,hydra clamp seal,latch assembly lh,spider kit,pump assembly,resilient mounting,valve reliefe unloader 207 bar,valve main relief 227 bar

Central Government/Public Sector

CTN :43531718

26 Feb, 2026 NA

Ajmer - Rajasthan

Tender For supply of set of step size racers for axle box bearing cru-150 of 3-phase locomotivesas per rdso smi no. rdso/2007/el/smi/0246 rev-2 dtd. 15.01.2018 one set comprising of 04 items in 04 nos/sets. as below:- 1) lipped inner racer =01 no. 2) plain inner racer =01 no. 3) angle ring (loose lip) =01 no. 4) end cap= 01 no. (material to be procured from rdso approved sources only). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43283813

12 Jan, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : rate contract with oem authorized distributor m/s parikh international llc, usa for rate contract for supply of spares of msi cementing pumps for a period of five (05) years. - diaphragm plate 4"(600/1000hp), seal,diaphragm 4"(600/1000hp)*new, seal diaphragm,4"(600/1000hp), diaphragm seal retainer 4"(600/1000hp), soc hd,1/4”-20*0.50” flat head, gasket power end plunger seal housing (600/1000hp), hex hd,3/8”-16*0.75”, adapter,stuffing box 4",(600hp), lantern ring 4"3sf(600hp), packing set,4” std(600/1000hp), o-ring,4” stuffing box-nut side (600hp)(2-351), par back, 4.0” stuffing box-nut side (600hp)(8-351), packing nut 4.00", (600hp/1000hp), adapter,fluid end 3.25"-4.5"(600/1000hp), plunger 4"(600/1000hp)ss, valve insert 3.25"-4.50"(600/1000hp), seal discharge flange (600hp), diaphragn plate 3.25",(600/1000hp), seal,diaphragm 3.25"(600/1000hp), seal,diaphrgm 3.25"(600/1000hp)*new, diaphragm seal retainer,3.25"(600/1000hp), oil seal pinion shaft (600hp), adapter,stuffing box 3.25"(600hp), lantern ring 3.25"3sf (600/1000hp), packing set,3"std (600/1000hp), o-ring,3"stuffing box fe side, o-ring,3.25"stuffing box-nut side (600hp)(2-345), plunger 3.25" (600/1000hp)ss, packing nut 3.25",(600hp/1000hp), packing set std, 3.25" std (600/1000hp), par-back 3.25-4.5" stuffing box-nut side (600/1000hp), seal,discharge cover 3.25"-4.50" (600/1000hp), valve stop 3.25"-4.50" (600/1000hp), valve complete, 3.25"-4.50"(600/1000hp)novatech, valve spring 3.25"-4.50"72# (600/1000hp) conical, seal,suction cover 3.25"-4.50" (600hp), valve seat 3.25"-4.50"(600/1000hp) novatech, pony rod stud (600/1000hp, o ring, 1.75"adj nut std (2-224 buna90), check valve,1/4" fnpt psig crack pressure , o-ring,3.25”-4.5” stuffing box-f.e. side (600/1000hp), par-back,3.25"-4.5"stuffing box f.e. side (600/1000)hp, adapter fluid end,2.75"-3"(600/1000hp), adpt bdy, 1/4"npt*1/4"npt hex nipple, gauge connection,3.5"-4.5"(600/1000hp), retainer nut,gauge conn, (600hp), discharge cover 3.5"-4.5"(600/1000hp), suction cover 3.5"-4.5"(600/1000hp), discharge flg,2"1502f (600hp), breather (600/1000hp), hose assembly, lubricator (600hp),internal x 16.50", hose assembly, lubricator (600hp),internal x 9.50", hose assembly pinion retainer(600hp) x 9.5", hose assembly pinion cap(600hp) x 15.75", hose assembly lube pipe (600hp) x 7.5", hose assembly bearing cover (600hp)x11.5", tee body, 1/2" npt fff, hose assembly, lubricator (600hp),internal*12", connecting rod bolt,(600 hp), cross head (600/1000hp), hex hd, 3/4"-10*2.00" grade b, stud, 1"-8*3.50" b7, hex nut 1"-8 heavy hex 2h, f-end bold, 12-pt flange hd, 1"-12 x 11"w/rolled thds, f-end bolt, 12-pt flange hd, 1.38"-12 x 10.5"w" w/rd., bearing,connecting rod (600/1000hp), bearing, crosshead pin (600/1000hp), bearing, inside main bearing-fixed (600/1000hp), spacer, (600/1000hp), seal, 2.50" x 3.25" x 375" (for roto seal), bearing, outside main (600hp), inner bearing float (600/1000hp), rotoseal lubricator, crankshaft assy, (600hp), gasketmain bearing housing (600/1000hp), gasket, tech cover (600/1000hp), flange plate gasket, breather port (600/1000hp), gasket, rear cover (600hp) new, crosshead pin, (600/1000hp), wrist pin retainer (600/1000hp), connecting rod,(600/1000hp), blank plug,1/4" npl socket type high press (5000psi), 2300 series check valve 0 to 1000 psig, dowell pin, 3/8" x 1.5", hex nut, 5/8"-11 castellated** special, cotter pin,1/8"x 1.25", crosshead guide (600/1000hp), bearing retainer, inner race (600/1000hp), bearing retainer, outer race (600hp), par-back, 3"stuffing box-nut side (600hp) (8-343), o ring 2.75 & 3 stuffing box fe & 2.75 nut side (2-239)stuffing box nut side, par-back ,2.75 & 3 stuffing box fe & 2.75 nut side 8-239, valve insert, 2.75"-3"(600/1000hp), seal suction / discharge cover 2.75"-3"(600/1000hp), diaphragm seal retainer, 3"(600/1000hp), fluid cylinder,3.25"-4.50"(600hp) , valve-te, 1" x 2" 1502 std 15m, valve-te, 2" x 2" 1502 std 15m, repair kit te 1" std, repair kit te 2

Central Government/Public Sector

CTN :43464037

19 Jan, 2026 NA

Ahmedabad - Gujarat

Tender For supply of plain inner race for roller bearing

Central Government/Public Sector

CTN :43403547

27 Jan, 2026 NA

Delhi - Delhi

Tender For supply of set of step size racers for axle box bearing cru-150 of 3-phase locomotives as per rdso smi no. rdso/2007 /el/smi/0246 rev-2 dtd. 15.01.2018. set comprising of: (1) plain inner racer rb5088d to nei drg. no. pesd-6179 rev. nil or latest - 01 no. (2) lipped inner racer rb5088d to nei drg. no pesd-6179 rev. nil or latest - 01 no. (3) angle ring (loose lip) to nei drg. no. pesd-6179 rev. nil or latest -01 no. (4) end cap, qty-1 no. to nei drg no. x-202 rev. nil or latest part no. 5

Central Government/Public Sector

CTN :43345617

25 Feb, 2026 NA

Hoshangabad - Madhya Pradesh

Tender For supply of set of inner races of fag make

Central Government/Public Sector

CTN :43345897

19 Jan, 2026 NA

Jalpaiguri - West Bengal

Tender For supply of motorized cone inner race checking fixture

Central Government/Public Sector

CTN :43355558

12 Jan, 2026 NA

Ludhiana - Punjab

Tender For supply of plain inner racer for rb-5020

Central Government/Public Sector

CTN :43324634

13 Jan, 2026 NA

Multi City - Multi State

Tender For supply of set of inner racers for axle box of wag9

Central Government/Public Sector

CTN :43324916

09 Jan, 2026 NA

Multi City - Multi State

Tender For supply of set of inner racer(step size)-m/s fag design, for wag7 locomotives, consists of 03 items : 1) labyrinth ring(thower) (step size)to fag drg. no. 901-17a-104 =01no 2)fag l wuz 148 x 270 (step size inner racer) to fag drg no lwuz 148 x 270 = 02nos 3) journal distance ring (step size) to fag drg no 901-17-105a = 01 no. specn no 1) to fag drg no 901-17a-104 2) to fag drg no lwuz 148 x 270=02nos 3) to fag drg no 901-17-105a =01 no.

Inner Race Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors