Latest insulation tester Tenders | Government insulation tester Tenders

Central Government/Public Sector

CTN :45741797

08 Jul, 2026 NA

Moradabad - Uttar Pradesh

Tender For supply of spares components to earth leakage detector of anuvidyuth make. the set consists: 1. meter module (main card, insulation tester and panel meter), 2. channel module (channel card fittedwith accessories), 3. main module for add-on units, 4. channel card, 5. mains cards, 6. cable cards, 7. mother board, 8. panel meters, 9. transformer xr-273-3, 10. transformer xr-243-n1, 11. transformer xr-355, 12. terminal strips channel/mains, 13. display card, 14. test leads redx2+green, 15. frc connector for meter reading, 16. relay 4 change over, 17. multi turn pot 20k (mt), 18. reset switch mpu-2, 19. dc buzzer, 20. rotary switch, 21. euro9 connector 32 pin, 22. euro connector 48 pin and 23. 1m potentio meter for main module. firms offer: make/model: anu vidyut [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45742335

07 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of insulation tester (q3)

State Government

CTN :44231929

13 Jul, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

Central Government And Public Sector

CTN :45736230

02 Jul, 2026 NA

Lumding - Assam

Tender For supply of tertiary station name board/ diagonal boards. boards shall be of high strength one piece 600mmx 600mm square shape powder coated in ral 9003 to minimum 50um thickness on both sides, with three point bending flexural test of the board collar greater than 7800n. primary collar of height 20mm with corners of r 45mm for prevention of accidental injury shall be stretch roll formed to 90 degree to sign face, without involving any cutting and welding and secondary collar of 20mm width, shall be bend inward to 90 degree to primary collar for installation purpose. this board shall be made of 2mm thick aluminum sheets, 2mm thick roll formed s.s clamping plate which shall be firmly rotatory riveted to secondary collar. approved test and graphics shall be eco friendly printed on retro reflective sheets astm d 4956 it madein three colors and three languages hindi, english and regional language and firmly pasted on sign face noinstallation hardware shall be visible from the sign face. this board shall not have any separate back frame for strengthening. all hardware items used shall be of ss304 grade, high tensile and anti theft nuts shall beused in all type of installation, all charges including gst and installations. make superior quality or similar. note- due to gm inspection in lmg materials are urgently required and installed within 7 days from the date of p.o [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

Central Government/Public Sector

CTN :45506517

07 Jul, 2026 NA

Chamoli - Uttarakhand

Tender For corrigendum : supply of digital dc insulation tester (meggar) , digital micro ohm meter , digital winding resistance ohm meter , automatic 3-ph transformer turns ratio tester , portable cable fault locator , portable earthing resistance measuring device

corporations/Associations/Others

CTN :45740203

10 Jul, 2026 2.15 Crore

Dhanbad - Jharkhand

Tender For 5 kv digital insulation tester to dvc, transmission wing, maithon, jharkhand

corporations/Associations/Others

CTN :45711223

18 Jul, 2026 23.25 Lacs

Thiruvananthapuram - Kerala

Tender For micromanipulator system with accessories - micromanipulator system with accessories. hvac system for ivf lab&ot (air handling unit), battery operated power drill with reamer saw and accessories. syringe pump, advanced phaco emulsifi-cation system, grossing work station, ice lined refrigerator modular operation theatre type b, c-arm mobile image intensifier system model a, c-arm mobile image intensifier system model b. arthroscopy camera & instruments and shaver system model b, blood gas analyzer 500 test/ month, blood gas analyzer 200 test/month linear accelerator (linac) ring gantry. therapeutic apheresis machine, 4k ent video imaging system type ii procurement of consumables for cath lab (category 1) hd laparoscopic system. hd laparoscopic instruments, defibrillator with cardiac monitor, blood collection monitor mobile digital radiography model b. refrigerated incubator for animal husbandry, refrigerated micro centrifuge for animal husbandry. ergometer. active passive exercise system for upper and lower extremity. sperm fuge. microdebrider for ent. pediatric cysto urethroscope 8fr, body box for plethysmography, cycler for performing peritoneal dialysis (capd) type a. semi rigid thoracoscope with camera, light source and display unit, magnetic stirrer, tissue homogenizer, retractor set, lcd vision monitor, normal delivery kits, delivery kits for c-section, whole body phototherapy unit. instruments for vats (video assisted thoracic surgery), nephroscope 19.5fr. drying cabinet, mri compatible basic vital monitor. mri compatible ventilator. intra oral digital radiographic system type b. high frequency neonatal ventillator ments and all other information rela

Central Government And Public Sector

CTN :45728587

03 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For supply of digital high voltage insulation tester . test voltage 250v to 5 kv insulation resistance measurement range up to 1 tera ohm with polarization index (pi) and di electrical absorption rate (dar) testing facility , make: fluke/flair/teams or similar. [ warranty period: 30 months after the date of delivery ]]

Central Government And Public Sector

CTN :45741958

15 Jul, 2026 54.7 Thousand

Bilaspur - Chhattisgarh

Tender For supply of insulation tester (q3)

Insulation Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors