Latest iron ingot Tenders | Government iron ingot Tenders

CTN :40728738

14 Jul, 2025 NA

Udhampur - Jammu And Kashmir

Tender For bid to ras supply of shuttering plates - shuttering plate 3.15 mm thick size 1.200 x 1.00 m supported with angle iron of size 50x50x5 mm as per cross section of drawing-a attached, appx weight 70.00 kgs , shuttering plate 3.15 mm thick size 1.200 x 1.00 m supported with angle iron of size 50x50x5 mm as per cross section of drawing-b attached, appx weight 60.00 kgs , shuttering plate 3.15 mm thick size 1.200 x 1.25 m supported with angle iron of size 50x50x5 mm as per cross section of drawing no c-01 attached, appx weight 77.00 kgs , shuttering plate 3.15 mm thick size 1.200 x 1.25 m supported with angle iron of size 50x50x5 mm as per cross section of drawing no c-02 attached, appx weight 83.00 kgs , shuttering plate 3.15 mm thick size 1.200 x 1.25 m supported with angle iron of size 50x50x5 mm as per cross section of drawing no d-01 attached, appx weight 77.00 kgs , shuttering plate 3.15 mm thick size 1.200 x 1.25 m supported with angle iron of size 50x50x5 mm as per cross section of drawing no d-02 attached, appx weight 71.00 kgs

State Government

CTN :41011211

30 Jul, 2025 NA

Delhi - Delhi

Tender For supply of hot bain marie , pre wash sink set , chapatti plate buffer , chapatti rolling table , four door refrigerator insulation body , four door freezer insulation body , aluminum patila 50 ltr , aluminum patila 100 ltr , cooker 25 ltr , atta mixer machine , mixer grinder , tea container , palta big , ladle , iron kadai big , steel kadai medium , lunch steel plates , steel bowl big , apron and caps for kitchen

Central Government/Public Sector

CTN :41017932

11 Aug, 2025 NA

Multi City - Multi State

Tender For supply of ferritic steel sheet 8x1250x3000mm., as per drawing: is:6911-1992,grade x04cr1 2 (405), surface finish 2d as per tab. 8., packing instruction: stainless steel sheets, coils an d plates:- (a) stainless steel (austenitic & ferritic steel) coils. the coil shall be protect ed in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a la yer of water proof paper through out whole length. ii) coil should be wrapped with a l ayer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet . iv) side of the coil should be covered with card board sheet. v) after this whole coil should be wrapped with biodegradeable plastic sheet of suitable thickness. vi) the inne r edge of the coil should be protected by gi ring followed by another iron ring. vii) ou ter edge of the coil should be wrapped with gi ring. viii) coil should be securely strapp ed with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on t he circumference of the eye. ix) whole coil should be mounted on wooden blocks for e asy lifting/stacking. x) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650 mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (aust enitic & ferritic steel plates/sheets) i) the sheets/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be seprated with a layer of water p roof paper, after this the whole bundle should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. a metal protecti on in edges should also be provided. ii) all bundles shall have a minimum of 2 hoops upt o 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mecha nical damange & corrosion during transit if any shall be at the cost of supplier. , procti on procedure: covered in pi [ warranty period: 30 months after the date of delivery ]

CTN :41026574

11 Jul, 2025 NA

Multi City - Multi State

Tender For supply of wooden box with interior foam for solar panel plates,wooden box with interior foam for solar panel plates,wooden box with interior foam for solar panel plates,wooden box with interior foam for solar panel plates,iron frame fitted at cvs for solar panel plates,iron frame fitted at cvs for solar panel plates,iron frame fitted at cvs for solar panel plates,iron frame fitted at cvs for solar panel plates,adm box steel for rcp i and ii,adm box steel for rcp i and ii,adm box steel for rcp i and ii,adm box steel for rcp i and ii,agniveer drill competition white metal trophy,agniveer drill competition white metal trophy,agniveer drill competition white metal trophy,agniveer drill competition white metal trophy,net for tennis court,net for tennis court,net for tennis court,net for tennis court,basketball nivia,basketball nivia,basketball nivia,basketball nivia,net for basketball,net for basketball,net for basketball,net for basketball,medals for agniveer drill competition,medals for agniveer drill competition,medals f

Central Government / Public Sector

CTN :41017887

28 Jul, 2025 NA

Sambalpur - Odisha

Tender For supply of junction boxes (cast iron type) with covers and terminal plates 24/30 way to suit dr g.no-23967/1(as amended up to date) and irs:s-10/78. this includes supply of pbt terminal. [ warranty p eriod: 30 months after the date of delivery ]

CTN :40793747

17 Jul, 2025 NA

Sambalpur - Odisha

Tender For corrigendum : supply of automobile fault finding work , tyre pressure gauge , measuring steel tape 5 meter , soldering iron 25w 230 v temp 400 degree c , soldering cum desoldering set 600 watt , lux meter display 0 to 70,000 lux 3 ranges min 9v battery , line tester electrician 500v , wire stripper adjustable length insulated 150mm , crimping tool 16 sq mm to 95 sq mm , surface plate with stand cast iron , car lift upto 4 ton hydraulic lift model , two wheeler bike or scooter assembly set ev , transmission or gearbox demo kit transmission system for ev , hvac demo kit , instruction kit for charging system , lighting and wiring system mock layout , ev kit chassis 3 wheel passenger full vehicle for assembly and disassembly , ev kit chassis 4 wheeler buggy for assembly and disassembly , ev kit chassis electrical vehicle component checker diagnostic kit , ev kit chassis solar based charging system , ev kit chassis safety tool kit , demonstration kit of el vehicle , battery management system , digital cum analog ic testing trainer kit , pressure and temperature testing kit , lithium ion battery pack tester , steering wheel puller , diagnostic tool for ev , puller for ev motor , dismantling and assembling of bms trainer kit , bldc motor , battery charger for leadacid battery , ev motion position sensor test kit , combination plier insulated 200 mm , screwdriver insulated 4mm x 150 mm diamond head , screwdriver insulated 6mm x 150 mm , electrician screwdriver thin stem insulated handle 4mm x 100 mm , heavy duty screwdriver insulated 5mm x 200 mm , electrician screwdriver thin stem insulated handle 4mm x 250 mm , punch centre 9mm x 150 mm , knife double bladed electrician 100 mm , neon line tester 500 v ac , steelrule graduated both in metric and english 300 mm , hammer crosspeen with handle 250 grams , pipevice cast iron with hardened jaw open type 100 mm , handvice 50 mm jaw , tablevice 100 mm jaw , hacksaw frame with 100 blades adjustable 300 mm , hacksaw frame with 100 blades fixed 150 mm , file flat 200 mm 2nd cut with handle , file halfround 200 mm 2nd cut with handle , file round 200 mm 2nd cut with handle , pliers longnose insulated 150 mm , pliers flatnose insulated 200 mm , pliers roundnose insulated 100 mm , double ended metric spanner 6 to 32 mm set , gauge wire imperial stainlees steel marked in swg and mm metric , portable el drill machine 0 to12 mm capacity 750w 240v with chuck n key , crimping tool 1point5 sq mm to 16 sq mm , pliers sidecutting 150 mm insulated , wirestripper adjustable length insulated 150mm , hammer ballpeen with handle 500 gm , scriber knurled centre position , allen key set , scissors blade 150 mm , torque wrench 8 nm to 15 nm , pipecutter to cut pipes upto 5 cm dia , pipecutter to cut pipes above 5 cm dia , trysquare 150 mm metal anti rust blade , multimeter analog 0 to 1000 m ohm 2v to 500 v 100 ma to 10a dc and ac , wirecutter and stripper 150 mm , copper earth plate 60cm x 60cm x 3point15mm , gi earth plate 60cm x 60cm x 6mm , primary earth electrode 2100x28x3point25mm , secondary copper strip 20x5mm earth electrode , outside micrometer 0 to 25 mm with least count 0point01 mm , tap set different sizes 2 set each , die for threading different sizes 2 set each , civil work utensils spade mixing spoon leveling plates etc set of 1 each item , plumbing tools set of 1 each item , megger 500v insulation tester dust and water protection 1 to 600 v , digital hydrometer range 1point100 to 1point300 , digital lux meter 0to70000 lux , digital magnetic flux meter , digital clamp meter auto //bid details 2 / 130 range dc and ac 400 to 600v , soldering iron 65w 230 v temp 400 degree c , soldering iron 120w 230 v temp 400 degree c , temperature controlled soldering iron 50w at 230 v 400 degree c , digital thermometer 0 to 150 degree c industrial grade , magnetic compass 3cm dia min , spirit level for floor level check , ac dc voltmeter 0 to 500v ac portable box type housed in bakelite case , ac dc voltmeter 0

CTN :40949790

11 Jul, 2025 2.43 Lacs

Delhi - Delhi

Tender For providing childrens playground equipment (jhula) in west campus near kendriya bhandar park of iit delhi. - childrens playground equipment, supply and installation of childrens playground equipment supply, delivery, and installation of a factory-fabricated suitable for children, constructed from high-quality powder-coated galvanized steel and weather-resistant hdpe or plastic seats and handles. the equipment shall consist with anti-slip grips and ergonomic support, mounted on a central pivot frame with heavy-duty bearings to ensure smooth and safe operation. all materials used shall be uv-stabilized, rust-resistant, and conform to playground safety standards. the equipment shall be securely anchored into a concrete foundation as per the manufacturer s specifications, complete in all respects including excavation, foundation, backfilling, and finishing to the required level.(the equipment must accompanied with test reports for quality, safety, durblity, and proper functioning of equipment), 1) providing and fixing deluxe 2 see saw as per specifications, 1.1) deluxe 2 see saw:- product area: minimum 2500 mm x 350 mm. safe play area: minimum 4500 mm x 1500 mm. see saw lever is made up of minimum 100 nb gi b- class pipes. lever length willbe minimum 2500 mm long. lever ends are coveredwith gi pipe end cap. two nos. of seats are made up of lldpe plastic with inbuilt handle. stand is made up of minimum 80 nb gi b-class pipes. two no of pedestal bearing are given for smooth and noiseless movement of see saw lever. bearing is covered with nylon cover, 2) providing and fixing of deluxe slide as per specifications, 2.1) deluxe slide ae301 structure made of 35mm x 4mm angle iron frame slide: g.i. sheet slide length: 6ft, 3) providing and fixing of kids merry go round as per specifications, 3.1) frp platform merry go round:- product area: minimum 1500 mm diameter. safe play area: minimum 3000 mm diameter. the platform of merry go round made up offibre reinforced plastic. the ring on which the frp platform is based. barcode on machine to show the proper use of machine., 4) providing and fixing of horse rider as per specifications, 4.1) horse rider product area: minimum 900 x 350 mm. safe area: minimum 2700 mm x 950 mm. spring assembly is made up of square plates & compression spring. compression spring is made up of minimum 18 dia wire, spring dia is minimum 200 mm and height is min 300 mm (+10%). stand is made up of minimum 40 nb b class g.i isi mark pipes of reputed make (jindal/bhushan/tata) plate is welded on it to fix plastic bike on it firmly. all welded joints are properly groundedand coated with an epoxy sealant for rust resistance. all sharp edges and corners are properly ground before painting. powder coat done by first coat of superior brand primer 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. character is made up of lldpe plastic with rotational moulding process which is nonageing, non-toxic and have u.v. stabilizers for colour resistance. length of bike is minimum 850 mm long and weight is minimum 7 kgs. it has inbuilt handle and foot rest., 5) providing and fixing of triple swing side as per specifications, 5.1) triple swing, side pipe - 35 mm upper pipe - 50 mm seat - rubber sheet chain - 3 mm.

CTN :40940304

18 Jul, 2025 6.36 Lacs

Gwalior - Madhya Pradesh

Tender For purchase of various gym equipments for chhatri mandi gym file no. 68/25x2/10 - motarised trademillac motor - 5hpweight capacity - 150kg max, spinning bikewheel bike 15 kg weight capacity, elliptical cross trainermagnet wheel 16 kg 150 kg weight speed time all indications, crazy fit99 top speed 170 kg weight capacity, multi gym 5 stationall 5 exercises with all weight stacks, dumbell set2.5 kg to 20 kg iron inside rubber outside, ad bench flatincline/decline, twister easy to twist180 kg, plates 2.5 kg to 25 kg metal inside rubber outside, rod setheavy ms, hyper extensionfull workout

CTN :40923715

11 Jul, 2025 5.79 Lacs

Koppal - Karnataka

Tender For supplying of materials to compound wall at govt primary school at kolur village in koppal taluka - the cost of all materials, centering, transportation, fixing, wastage and other extra charges etc, excluding, the cost of unskilled labour., transportation loading,. and unloading at 1% on material, tools and plants at 2 % on material, hom of cutting,. and grinding machine - 1, hom of welding, and grinding machine.,, mechanic class ll / mechanic hmp grade l/eme grade, welder grade, l, anticorrosive,. bituminous paint (black), ball bearing hinges heavy duty.,, cast iron spike,., ms plates,. 40 x 6 mm, ms plates,. 36 mm x 6mm, ms square rod,. 16 x 16 mm, dia 50mm ms hollow pipe b class 14 gauge,., painter class l, add brush, putty at 5% on cost, of distemper primer., distemper, primer., add gum / gangiwater / fevical and blue, at 10% of lime cost, burnt. lime/shell lime., add providing and removing scaffolding at 3 % on labour, add handling , loading and unloading at 1 % on material, solid concrete, blocks (40 x 20 x 20 cms)-4.00 n/sqmm., add sundries, charges at 2 % on material, add handling , loading and unloading at 2 % on material, casurina poles 100 - 150,mm, silver oak or equivalent, planks, binding, wire, tmt bars fe, 500, add watering charges, at 1 % on material., add sundries charges at1% on material., mixer ( concrete small, used in culvert), boulders,.,, bond stone 20 x 20 x 45, cm, size stone, 20 x 20 x 25 cms., miscellaneous,/unforeseen charges which are necessary during execution., add formwork and staging at 20% for height upto 5 m., mason class l (with tools), broken granite, metal 10 mm., granite, metal 20 mm., coarse, sand (zone iii), portland, cement

corporations/Associations/Others

CTN :40933766

15 Jul, 2025 NA

Mysore - Karnataka

Tender For auction sale of ms scrap of condemned /damanged bh40 equipment items,m s melting scrap,m s turning boring scrap,c i boring m s turning boring,scrap of c.i boring/m.s. turning & boring(mixed with mud),scrap of rubber items,scrap of m.s. flame cutting slag,hoop of iron baleputty scrap,scrap of cond/obsolete/used/rej field returned/damaged radiators & oil coolers,scrap of cond/un-serviceable/rej/obsolete operator seats of various eqpt models,scrap of cond/obsolete/used/rej/damaged/wornout eqpt /project tyres,m s scrap of miscellaneous items consisting of waste formed plates,scrap of used welding coil spools,scrap of used cond rejd and unserviceable voltas diesel forklift,scrap of used cond rej and unserviceable godrej diesel forklift,scrap of used, cond, rejd and unserviceable voltas diesel forklift,scrap of cond/damaged/used/unserviceable/rej air compressor,scrap of cond /damaged/rejected/unserviceable conventional,scrap of protective covers guards,scrap of used, rej, cond, damaged and worn-out grinding wheels,scrap of cond field returned bearings associated with/without gear assemblies,scrap of used cond damaged rej unserviceable steel wire ropes and chain links,scrap of used cond rej and unserviceable lead acid batteries dry batteries,scrap of electrical items,scrap of cond/ damaged/rejected production equipment parts,m s scrap of used discarded engine,scrapped cabins,m s scrap of used rejected cond fabricated items,scrap of cond damaged used or rejected un-serviceable field returned items,scrap of old dead wood,scrap of used oil,scrap of used empty plastic oil barrels,scrap of used empty ms grease barrels

Iron Ingot Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others