Web Analytics Made Easy - StatCounter

Ismb Tenders

Get complete information related to latest Ismb Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ismb Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ismb Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government And Public Sector

CTN :45731130 Due date: 06 Jul, 202606 Jul, 2026 NA
Tender For supply of i beam to size - ismb 300 x 140 as per specification is 808: 1989.material: is 2062. [ warranty period: 30 months after the date of delivery ] ]

CTN :45716962 Due date: 18 Jul, 202618 Jul, 2026 NA
Tender For supply of plywood , mcb , mild steel loop holes size 900x450mm with all fitiing , ms door , ms loop hole with shutter , ms prefabricated steel door , ms single bunk bed with ply cushion , ms steel ladder , nut and bolt for srt , office table big , oil bound distemper , paint brush , pc cable 6 sqm 2 core copper , pbs roll , peg stay 6 hooks , pendent holder , pipe 40 mm 20 ft long , pillar cock , pit cover for lc , plywood 9mm 6ftx3ft , pp gi 10ft long green colour , pp gi sheet 12ft , punch tape , pvc bd 8 x 10 inch , pvc bd 6 x 4 inch , pvc cable 2 core copper , pvc cable 10 sqmm 2 core aluminum , pvc chair with arm , pvc pipe 3inch , pvc door , rectangle pipe 2inch x 1inch , pvc reducer socket 1inch x 3inch , round up , sand , scatling , septic tank cover , shover , sleeping double bunk bed cushion , sliding bolt 10inch , soakage pit cover , soap disc , socket 4inch for pvc pipe , solution for pvc , srt 10ft , stainless steel hand wash basin with frain pipe and waste coupling , stainless steel dispenser , steel but hinges 3inch door hinges , starter 3 phase , steel door size 900 x 1800mm with all fittings , steel ladder , steel locker size 770x600x950mm , steel window , steel sink , stop cock , switch 5 amp , switch 5 amp comb , switch socket 15 amp , syntex stand , tab , tarpin oil , tefflon tape , table rod complete set , thinner , toilet seat cover , towel rod , tower bolt , u clip 25 mm , urinal port with waste pipe , union 1 inch , ventilator size 450x300 , non skid vetrified tiles 2ft x 2ft , wall mounting fan , wash bain piller cock , waste pipe , water camper stand , water proof plastic , water storage tank , welding rod , wc seat , white cement , wire mesh 4x20ft , wire 3 core 10sqmm , window rain protector , wire t c 16 sqmm , wooden board 8x8x2 , wk station table , wooden primer , wooden cabinet , cement opc 43 grade , hdpe film 500 micron , ceramic wash hand basin with all fittings , bib tap , pvc low level cistern 10 ltr capicity , cgi sheet 8ft , srt 8ft , 4mm clear acrylic sheet in lieu of glass for window , glass putty , pvc copper wire , ppgi sheet 6ft , plywood 8ft x4ft 12mm thick , 100 mm thick machine pressed interlocking paver block , pcc bricks , false ceiling tullu pump, 16 amp switch , 4 inch dia pvc plastic pipe, 5 amp s socket , aggregate , air filter , aluminium door , aluminum door closure, angle holder, bib cock brass, binding wire, black fill compound , paint, bow handle, brass rod, camper stand , celling fan , celling light , ceramic non skid tile 1ft x 1ft, cgi sheet 10ft, chair plastic , chair revolving, change over switch 32 amp, cloth hook, cob garden light, colour coated sheet 1ft long , concertina coil, concrete block , coolent , cp hose pipe , cpvc elbow 1inch, cpvc nipple 1inch, cpvc pipe 1inch, cpvc socket 1inch, cpvc tee 1inch, cpvc union 1inch, cutting disc 4inch, door rain protector , door stopper , double bunk bed , earthing set , elbow 4inch for pvc pipe , entrance canopy with cgi sheet fitted , exhaust fan, false ceiling 2ft x 2ft, fan belt, fan capacitor , fasterner , fire extinguisher 2 kg, flexible pipe 2 inch, flexible pipe 20mm, floor tiles of size 11inch x 11inch, flush tank pvc with complete, fly proofing door aluminium, fuel filter element, fuel pipe , gang box, gate valve, geyser 3 ltr, gi elbo , gi elbo , gi pipe 20 ft long, gi union, gi pipe socket, gi pipe union, gi pipe 20 mm socket, gi pipe socket, gi pipe union, gi pipe socket, gi socket, glass pane , hdpe can 35 ltr, hand jet spray, hdpe sand bag, hot and cold pipe 450mm, hexa blade, indian toilet seat, insulation tape, ismb, inverter led bulb, karandi, j hook angle small, ismb , ldpe film 130ft x 18ft, led bulb 15 w, led bulb 9 w, led security light 33 w, led tube light //bid details 2 / 141

Central Government And Public Sector

CTN :45711422 Due date: 06 Jul, 202606 Jul, 2026 NA
Tender For auction sale of others - total qty.= 22611.05 kgs., description: - scrap of abandoned fob structure at gtw i.e. estimated iron fittings(angle, ismb, ismc etc.). remarks - 1) after dismantling, all debris of condemned steel structure should be collected and removed from the site before effecting the delivery. 2) any type of hidden materials which is found during dismantling of building like rails angles, channels etc. should not be offered. the above iron materials must be handed over to concern sse/works/line/bsp store. 3) dismantling of the above structure will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. purchaser will demolish and clear up to ground level only. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. 4) any loss due to theft, accident etc. shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. 5) material to be sold on as is where is basis and should be delivered in weight.

Central Government And Public Sector

CTN :45711423 Due date: 06 Jul, 202606 Jul, 2026 NA
Tender For auction sale of others - total qty.= 2449.17 kgs., description: - scrap of abandoned fob structure at jrmg i.e. estimated iron fittings(angle, ismb, ismc etc.). remarks - 1) after dismantling, all debris of condemned steel structure should be collected and removed from the site before effecting the delivery. 2) any type of hidden materials which is found during dismantling of building like rails angles, channels etc. should not be offered. the above iron materials must be handed over to concern sse/works/line/bsp store. 3) dismantling of the above structure will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. purchaser will demolish and clear up to ground level only. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. 4) any loss due to theft, accident etc. shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. 5) material to be sold on as is where is basis and should be delivered in weight.

CTN :45587458 Due date: 02 Jul, 202602 Jul, 2026 NA
Tender For corrigendum : supply of provn of fighting pd constructed by brickwork , entrance canopy , loop hole on three sides , prefabricated steel door , steel double bunk , steel roofing trough srt , ismb 150 x 75mm x 3 point 46 mtr , 12 mm dia tmt bar , 8 mm dia tmt bar , ms binding wire , paint og synthetics enameled , paint brown synthetics enameled , red oxide primer , turpentine oil , painting brush 75mm , hdpe sand bags , wpc is2645 , ceiling at the bottom of ismb , ldpe film , tools and plants one set

Central Government And Public Sector

CTN :45358517 Due date: 01 Jul, 202601 Jul, 2026 NA
Tender For bid to ras supply of 1 . 92101016080 structural steel angle 65x65x6as per is 2062-2006grade designation e-250quality asize 65 x 65 x 6minimum length 6 mtr , 2 . 92105008030 ismc of size 150mm x 75mmas per is 2062- 2006grade designation e-250quality adimensions as per is 808 1989length- minimum 6 meters , 3 . 92105003150 ismc 75 x 40as per is 2062-2006grade designation e-250quality amininmum length - 6 mtr. , 4 . 92105003080 ismc of size 100mm x 50mmas per is 2062-2006grade designation e-250quality adimensions as per is 808 1989length- minimum 6 meters , 5 . 92107012000 ismb size 250mm x 125 mmas per is 2062-2006grade designation e-250quality adimensions as per is 808 1989length- minimum 6 meters , 6 . 92106001120 m.s flat 100x10mmm.s.flat of size-100mmx10mmas per is 2062-2006grade designation e-250quality alength- minimum 6 meters , 7 . 92105005080 structural quality channel ismc size - 100 x 50 x 5 mm as per is 2062-2006grade designation e-250quality adimensions as per is 808 1989length- minimum 6 meters

Central Government And Public Sector

CTN :45702517 Due date: 06 Jul, 202606 Jul, 2026 NA
Tender For auction sale of others - total qty.= 19310.02 kgs., description: - scrap of abandoned height gauge structure i.e. estimated iron fittings(angle, ismb, ismc etc.). remarks - 1) after dismantling, all debris of condemned steel structure should be collected and removed from the site before effecting the delivery. 2) any type of hidden materials which is found during dismantling of building like rails angles, channels etc. should not be offered. the above iron materials must be handed over to concern sse/works/line/bsp store. 3) dismantling of the above structure will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. purchaser will demolish and clear up to ground level only. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. 4) any loss due to theft, accident etc. shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. 5) material to be sold on as is where is basis and should be delivered in weight.

CTN :45522369 Due date: 03 Jul, 202603 Jul, 2026 NA
Tender For corrigendum : procurement of steels items- sheets,m.s.corrugated 1.6mm as per annexure-i, beam,ismb,, angle,m.s.

CTN :45671334 Due date: 01 Jul, 202601 Jul, 2026 11.98 Lacs
Tender For estimate for installation of the barricading by using gi sheets and ismb columns khattas in ward 10 nit faridabad.(recall)

CTN :45693782 Due date: 13 Jul, 202613 Jul, 2026 73.10 Lacs
Tender For supply ere commi of various electromechanical equipment like 5 no 5 cs vt pump electric motors starter panel and other allied material for flood protection works from the field area of village dang khurd outfall at rd 65000r of nigana feeder - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.
 Loading, Please wait...

Connect us via What's Up