Get complete information related to latest Ismc Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ismc Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ismc Tenders.
Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl
Tender For supply of ismc standard channel to is 8081989/is-2062-1992 to size 125x 65mm in standard length of 5 to 6 meters. [ warranty period: 30 months after the date of delivery ] ]
Tender For tender for supply of outdoor full hd day and night ptz ip camera , camera mounting bracket heavy duty gi , camera junction box weatherproof , spike buster 4 port , camera pole gi 6 mtr with stair provision , pvc pipe heavy duty , pvc box 3x3 , led light 50w ip66 , solar panel , gi pole for light 6 mtr , pole foundation rcc , outdoor jb for light termination , ofc 6 fiber cable , ofc joint closure , ofc liu 12 port loaded , ofc patch cord lc-sc , network switch 8 port poe with sfp slot , sfp module pair , outdoor utp cable , power cable 2 core x 10 sqmm , nvr 32 channel ip , nvr 16 channel ip , nvr 08 channel ip , hdmi cable 10 mtr , surveillance hdd 10 tb , led tv 75 inch , wireless mouse , network rack 27 u , 24 port network switch sfp modules , installation system testing transportation
Tender For inviting the quotations for fixing building materials rates - electrical - district faridabad - 1.5 sqmm 2 core pvc seathed copper conductor cable , 50 mm dia g.i. pipe round bracket with cap suitable for 100 mm dia pole top with outer dia of bracket 1000 mm , , 100 watt led flood light, 150 watt led flood light, 8 ch nvr, nvr 16 channel upto 4 mp resolution, pt-nc320p3-i(d) 2mp ip bullet, hard disk w/d 2tb, cat-6 cable box 305 mtr, 8 port poe switch, pvc jungtion box, m.s box 2u/4u, rj 45 connector, rack cabinet 4u, pdu board 5amp, laying charge of cat-6 cable, cctv installation & commissioning charge
Tender For bid to ras supply of oblique 2 inch long for aluminium t oblique l , aluminium t channel powder coated size 1 point 5 inch x 1 point 5 inch having thickness 1 oblique 8 inch , gi wire 4 mm thickness , gi wire 2 mm thickness , aluminum curtain rod 3 oblique 4 inch dia , aluminum curtain rod side holder 3 oblique 4 inch dia as per sample , steel curtain rod 1 inch dia as per sample , ss curtain rod side holder 1 inch dia with clamp and clamping screw and rawel plug 5 mm as per sample , plastic door with frame 0 point 75 x 2 point 1m ready made plastic door as per sample , door frame of size 1point10 x 2point10 m made of hard wood of size 10 cm x 7point5 cm thick as per sample , fly proof wire mesh steel wire dia 24 swg 15m long 4 ft width as per sample , floor door stopper small heavy duty , wooden ply cutting blade , waterproof adhesive sh marine , standard epoxy adhesive 180 gms , vinyl flooring sheet 1mm thickness , pbs roll 1 point 5 mm thick 01 mtr width 20 mtr length , oil stone 6 inch x 2 inch x 1 inch , glass cutter mechanical , tinted toilet window glass pan 6ft x 4ft x 3 mm , glass pan 6ft x 4ft x 4 mm , glass putty , looking mirror 2ft x 4ft aluminium beading as per sample , looking mirror 2ft x 1 point 5ft aluminium beading as per sample , ravel plug pvc 4mm oblique 6mm , door handle aluminium 4 inch , haxsaw blade 1 oblique 2 inch high speed 1ft long appx , haxsaw blade 1 inch high speed 1ft long appx , epoxy compound putty sealant adhesive for leakage 100 gm , suction pump for clearing blockage bathobliquetoilet 3 inch dia , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm colour sky blue , pgi sheet 8ft x 3ft x 1mm , tower bolt aluminium 6 inch , tower bolt aluminium 8 inch , tower bolt aluminium 10 inch , door closer helical as per sample , door closer hydraulic as per sample , sliding bolt 12 inch , sliding bolt 8 inch , handle consealed 4 inch , handle folding 3 inch , plastic bush 2 inch length and thick 12 mm , ss screw 1 oblique 2 inch 500 nos , ss screw 3 oblique 4 inch 500 nos , butt hinges ss 3 oblique 4 inch x 3 oblique 4 inch x 3 inch , tower bolt 4 inch , curtain socket one side 1 inch matki , ss handle 6 inch , ss handle 4 inch , furniture pvc edge band tape 3 oblique 4 inch ivory 50 mtrs , furniture pvc edge band tape 3 oblique 4 inch wooden 50 mtrs , sand paper 120 oblique 100 , ceramic tiles 0 point 30m x 0 point 30m x 6 mm thick , ceramic non skid tiles 0 point 30m x 0 point 30m x 6 mm thick , vertified tiles 0 point 60m x 0 point 60m x 8 mm thick , vetrified tiles 0 point 30 x 0 point 30 x 6 mm thick white colour , wall tiles 0 point 45 x 0 point 30 x 8 mm thick white colour , inter locking contract block oblique medium traffic precast concrete blocks different colour , wall clading tiles 240mm x 60mm x 9mm different colour , j hook 6 inch half threaded with nut and washers 8 mm , dr fix it , ultimate woodworking adhesive sh , dha iron appx weight of 01 kg , spade appx 1 kg wt , showel with handle appx 1 kg wt , pick axe appx 2 point 50 to 3 kg wt , crow bar 5ft long , plumb bob , mason thread plastic , spirit level size 12 inch , stabila spirit level type 70 mm , mason hammer 1 kg mbt riveting hammer head , mason hammer 1 point 5 kg , mason trovel small size , mason trovel iron big size , water level pipe 8 mm dia , road delineator with solar , speed braker rubber , 3 m cat eye indicator , road sign boards sample and drawings to be collected from work section , half round file 1 point 5 inch , right angle 12 inch , screw driver set of 6 pieces , cutting wheel 4 inch dia for angle grinder , construction black safety gumboots dash //bid details 2 / 116 black size 9 , dustless chalks white 100 no per pkt , tile cutting blade , carbon bush for tile cutting machine , tile cutting machine 120mm , ms square pipe 70mm x 70mm x 2 point 6mm th 6mtr length , ms square pipe 50mm x 50mm x 2 poin
Tender For corrigendum : supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator
Tender For corrigendum : supply of deflection of curved member apparatus , shear centre apparatus , portal frame apparatus , two hinged arch apparatus , cable geometry and statics apparatus , unsymmetrical bending apparatus , bending moment and shear force apparatus , maxwell reciprocal theorem apparatus , deflection of continuous beam apparatus , slope and deflection apparatus , behaviour of column and beams apparatus , elastic properties of deflection beam apparatus , two hinged arch apparatus , analysis of elastically coupled beam apparatus , pin joint truss apparatus , analysis of redundant joint apparatus , discharge over notches apparatus , pitot tube setup , impact of jet on vanes apparatus , digital handheld water velocity meters , tilting open bed flow channel flume , automatic traffic classification and counting counter , length gauge with isi certification mark is 2386 part i , speed gun speedster iii , gopro hero camera with tripod stand , thickness gauge with isi certification mark is 2386 part i , 75 mm sieve , 63 mm sieve , 50 mm sieve , 37 point 5 mm sieve , 25 mm sieve , 12 point 5 mm sieve , 9 point 5 mm sieve , 4 point 75 mm sieve , 2 point 36 mm sieve , gi pan and lid , 1 point 18 mm sieve , 600 micron sieve , 300 micron sieve , 150 micron sieve , 75 micron sieve , brass pan and lid , aggregate impact tester is 2386 part iv , crushing value apparatus is 2386 part iv , bitumen penetration kit is 1203 , flash point open and fire point cleveland is 1448 part 69 , ring and ball apparatus semi automatic is 1205 * /bid number : gem/2026/b/7615986 + /dated: 15-06-2026 ' ' / bid document 1 / 30
Tender For auction sale of others - total qty.= 22611.05 kgs., description: - scrap of abandoned fob structure at gtw i.e. estimated iron fittings(angle, ismb, ismc etc.). remarks - 1) after dismantling, all debris of condemned steel structure should be collected and removed from the site before effecting the delivery. 2) any type of hidden materials which is found during dismantling of building like rails angles, channels etc. should not be offered. the above iron materials must be handed over to concern sse/works/line/bsp store. 3) dismantling of the above structure will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. purchaser will demolish and clear up to ground level only. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. 4) any loss due to theft, accident etc. shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. 5) material to be sold on as is where is basis and should be delivered in weight.
Tender For auction sale of others - total qty.= 2449.17 kgs., description: - scrap of abandoned fob structure at jrmg i.e. estimated iron fittings(angle, ismb, ismc etc.). remarks - 1) after dismantling, all debris of condemned steel structure should be collected and removed from the site before effecting the delivery. 2) any type of hidden materials which is found during dismantling of building like rails angles, channels etc. should not be offered. the above iron materials must be handed over to concern sse/works/line/bsp store. 3) dismantling of the above structure will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. purchaser will demolish and clear up to ground level only. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. 4) any loss due to theft, accident etc. shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. 5) material to be sold on as is where is basis and should be delivered in weight.