Get complete information related to latest Juice Tank Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Juice Tank Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Juice Tank Tenders.
Tender For tender for satisfactory trial. , carry out strengthening work using the channels and angles provided by src and irc and conduct a satisfactory trial. , to fabricate the weak sloppy plates of the donali suit fitted on milo from the given ms plate as per the drawing and give a satisfactory trial. , removing the worn out trpf cover fitted on the mill and making and fitting a new cover using the plate given as per the drawing sample and giving a satisfactory trial. , to carry out the work of tipping the teeth of mill rollers and conduct a satisfactory trial. , to carry out the work of chevron cutting as per requirement on mill rollers and give satisfactory trials. , work involving the errectation of broken teeth on the mill s pressure chute repair of worn out teeth via hard facing and conducting a satisfactory trial run , dismantling the old pressure chute errected on the mill completely replacing the corroded section repairing and welding the damaged parts of the ss plate reassembling the unit fitting it onto the mill , fabricate the juicetank for the mill house using the provided 6 8 mm plate and conduct a satisfactory trial run , removing the bottom of the supply juicetank errecting a 12 mm plate in its place and conducting a satisfactory trial. , manufacturing the bed for the s.r.c. and i.r.c. motor gear and conducting a satisfactory trial. , remove the worn out trpf headstock side plate errect a 6mm plate in its place and conduct a satisfactory trial. , fabricating teeth for the hydraulic grab replacing old or damaged teeth with new ones and conducting a satisfactory trial run. , a dismantling old columns beam channels etc. b manufacturing and installing new columns beam channels etc. , removing the old corroded platform and replacing it with a new one. , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to 20 hp. , dismantling fabricating and erecting weak corroded pipe lines up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 inch and providing a satisfactory leak proof trial.
Tender For tender for cane bagass carriar bagass elivetor ke gale huye side plate ko katkar nikalna tatha 5 bata 6 mm nyi purani plate se banakar lagana , cane carriar cane chapar flore shaft ko cane carriar se bahar nikalna tatha usegadi per load karna va wapas aane per truck se niche utarna , cane carriar ke cutter levelar chapar ke hud ko katkar nikalna va nayi purani plate se hud ko marammat naya banakar lagana , inter carriar ke gale w kamjor size plate ko katkar nikalna w uske sthan per 20mm bata 16mm moti plate e sample ke anushar banaker , bagass elivator ki fail a tede traf sut ko eliment karna , bagass elivetor ke gale va kharab bed va spakit ko dismental karna va uske sthan per motor rewinding giar aadi ki fiting ke liye bed banana , mill rollar kalar ko nirdeshanushar banaker lagana kalar me belding karna , transmission giar ke tute cake bed ko nikalna va nirdeshanushar 16mm plate bata 300mm channel se naya banana , vibhinn sthano per gali hui plate ko katkar nayi purani plate se paich lagane ka karya 3mm se 8mm plate tak , mill ke cane carriar ki pratham drive giar may shaft sahit mill haouse me lejakar fitting karna tatha santoshjanak trail dena , boiler ke air hiter ke top cover naye purani plate se naya banakar lagana walding ewam trail dena , mill house ke teeno juice tray ko aluminium electrod se welding karna ewam santoshjanak trail dena , mill house ke rollar ke side plate drawing anusaar banakar lagana ewam welding karna tatha santoshjanak trail dena , head stock ke niche bagal me juice try upar ms plate lagakar welding karna ewam trail dena , cane carriar ke gale huye ewam tedhe huye channel trn aadi ko katkar nikalna tatha uske sthan per punah marammat karke cane carriar lagana , rollar ke veyering guard ko naya banana , rollar ke juice ko naya ya purjo plate se banakar fit karna , cane bagass carriar bagass elivator ke gale huye ranar ko katkar naya ranar lagana egil lagan welding karna , bagass elivator ke gale va kharab sabhi jali ko bahar nikalna tatha nayi jali lagane ke uprant punah fit karna , mill ke suit hud ki gali hui plate ko katkar nikalna tatha uske sthan per nayi purani plate se banakar lagana , purane gale va kamjor dsm skrin ko katkar dismental karna tatha uske sthan per nayi plate se naya dsm skrin banana va jali lagana , bagass boiler ka fan va uske badi ko naya banakar lgana , mill juicetanki ke gale huye batam kon ko katkar nikalna tatha uske sthan per naya banakar lagana va welding karna , mill house per nayi noch plate banana ewam welding kar fit karne ka karya , boilar ke expectra boiler ke gale hue hisse ko katkar nikalna ms plate se banakar lagana welding karna va trail dena , boilar ke gale hue suit bwmas fitter hud ko katkar nikalna tatha naye va purane plate se marammat krna welding va trail dena , boiler ke ander gale hue air heater damfer suit katkar niche utarna tatha naye purane plate se banakar top per lejakar fitt karna tatha trail dena , tothed rollar 800mm dia nayi 16mm plate se banana va uske naye tooth tip draing sempal anusar banakar welding karne ka karya , boiler ke fd fan dampharo ko kaatkar hatana tatha naya banakar fitting karna wa trial dena , air heater ke damphar ke suit ke marammat ka karya belding karna wa trial dena , roller ke ring ko naya plate banakar fit karna , feed roller ke danto ko kaatkar nikaalna wa naya ya marammat karna
Tender For supply of furniture and internal fitouts for permanent campus of jnv kondagaon (chhattisgarh) - discription of work, school building, (a) classroom, (i) classroom desk large sizesupply & installation big desk (for two persons)-the overall dimensions of desk will be 1066mm * 930mm * height 760mm, complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 900 mm x d 380 mm. edge towards bench shall be post formed with round edge. the remaining three edges must be sealed with 2mmthick pvc edge banding tape. edge band must be trimmed on edges and corners. the desk shall be have low chemical emission of vocs (voltage organic compounds) and carcinogens, contributing to a healthier room environment. seat and back rest shall be made of 18mm thick plywood of mr grade osl (one side shall be laminated, and other side shall have balancer finish) except back rest. back rest shall be have both sides colour lamination.technical details of seat and back rest are mentioned below:seating bench dimensions shall l 930 mm x w 300 mm. front side shall be rounded with post forming. remaining three edges shall sealed with 2mm thick pvc edge banding tape.back rest dimensions shall l 930 x h 200 mm upper side shall be rounded with post forming remaining three edges shall be sealed with 2mm thick pvc edge banding tape. desk shelve shall be made of prime quality 0.8mm thick crca sheet of h150mmxd300mm and side stiffeners of crca tube size 19mmx19mmx1mmthick. one vertical support (partition) of square tube size 25mm square x1.2mm thick must be provided at centre of tray . upper modesty made of prime quality 0.8mm thick crca sheet powder coated should be embossed with dimples in round shape, height will be 150mm, there should be perforated lower modesty made of prime quality 0.8 mm thick crca sheet of size h150mmxd21mm with square perforation, crca tube of size 19x19x1mm thick to be inserted for full length at bottom of jali . bag hook should be provide on both side of piller made of minimum 4mm dia rod side frame structure:- made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25mmx50mmx1.2mm thick crca tube , seat and back side frame structure made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25.4mm diameter x 1.6mm thick erw-1pipe , there will be 8no. horizontal supports are 25mmx25mmx1.2mm thick crca pipes. .bottom rectangular tube 50x25x 1.2mm thick should be closed with ppcp cap bothside sand pipe dia. 25.4x1.6mm thick should be closed with metal (backside) and other side (undertheseat) ppcp cap, complete as per engineer incharge desk should be in semi knock down form with the help 16 connecting pipes ; 8 pipes on each side : connecting pipe size will be 20x20x1.2mm .all metal pieces shall be welded properly strongly and conformity with regulations with co2 welding shall be used , crca metal shall be coated after being treated with at least three stages and cleaned from oil , grease , dust and other dirt using special thermal control coating for metal furniture to form a layer of base coating of (iron phosphating) (0.4 0.8) gm/m , automatic spray coating shall be applied to be followed by a drying process in a thermal furnace with suitable temperature and time for the process , metal pipe & 7 tank treatment with minimum 45-50 micron powder coating., (ii) classroom desk medium sizesupply & installation medium desk (for two persons)-the overall dimensions of desk will be 900mm w 5 x 890mm d 5 x 688/420mm h 5 , complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 870 mm
Tender For supply of dining table with six seating capacity, heavy teck wood structure with six heavy duty chairs with cushion, handle supported. marble top or glass top 25mm thickness. product name: heavy-duty steel frame recreation chair with stretcher. 1. structural frame: the main structure must be constructed from heavy-duty crca (cold rolled close annealed) steel tubing (minimum 25mm diameter and 1.2mm wall thickness). the design must incorporate a steel stretcher (horizontal reinforcement bar) between the legs for enhanced structural stability and to prevent frame spreading under heavy loads. 2. support & armrests: integrated handle support (fixed armrests) made of steel or high-impact polymer, designed for ergonomic comfort and securely fastened to the main frame. 3. cushioning & upholstery: > * seat & back: must feature high-density, high-resilience molded pu foam (minimum density 32 kg/m? for back and 40 kg/m? for seat) to prevent sagging over time. tapestry: upholstered in premium-grade, breathable heavy-duty fabric or high-quality pvc leatherette with high abrasion resistance (martindale test > 30,000 rubs). 4. finish: all metal parts must be treated with an anti-corrosive, 7-tank phosphating process followed by an epoxy powder coating (minimum thickness 50?60 microns) for a scratch-resistant and rust-proof finish. highest; known for strict gauge standards.excellent; premium finish and aesthetics. best value for high-volume use.foam quality, molded pu (long life).,thick cushioning; soft feel. high-density resilient foam. weight capacity: if not specified in the description, add a clause: "the chair must safely support a static load of minimum 130 kg." would you like me to adjust the "estimated rate" for your requisition based on the current market price for these brands make: godrej, nilkamal or or similar [ warrantyperiod: 24 months after the date of delivery ] ]
Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juicetank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juicetank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juicetank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory
Tender For supply and installation of furniture for boys hostel - iii at nliu, bhopal - supply of furniture, providing steel almirah mirror having overall size 910w(+ 05mm) x 500d(+ 05mm) x 1980 (+ 05mm) h , top , bottom , side panel made up of 1mm thick crca sheet powder coated , legs or pedistal and shelves made up of 1.2mm thick crca sheet powder coated and height of thelegs or pedistal should be 130 mm(+ 05mm), shutter made up of 1mm thick crca sheet powder coated , no sharp edges of almirah ends, all shelve rack divided into equal parts , door die cast chrome plated handles fitted with washer & double nut , handles ring made of pvc cap , almirah all metallic panels screw with nut & bolt, metal pipe & 07 tank treatment with minimum 50 micron powder coating. shelving height-wise adjustable shelf mounting: uniformly distributed load capacity per each full shelf is 40 kg maximum. three horizontal shelf partitions are provided made of 1.2 mm crca steel top shelf clear space height from bottom is 1050 mm and second shelf height from bottom is 700 mm and third shelf height 350 mm; 1mm crca sheet fitted with heavy duty 25mm. hanging rod 02 nos. 25mm dia med guage ss capsule pipe is provided on the top in the centre. locking & handle - s.s. handle with 2 way locking mechanism with shooting rod/bolt arrangement. 5mm tk plain mirror (make-modi, asahi, saint gobain) of size 400 mm x 1200 mm is to be provided on one flap fixed with the help of m.s. clips/beading as per approval. whole steel structure is epoxy powder coated to the thickness of 50 microns in approved shade/color and texture. the work includes all required m.s. hinges, handle, lock, bolts and hardware of good and approved quality etc. compete. this job includes all installation, material & labor etc. complete and nothing will be paid extra for execution/installation of the item. items should have 5-year warranty., providing hostel bed overall size 1980w(+ 10mm) x 960d(+ 10mm) x 810h(+ 10mm), hostel bed made of prime quality round metal pipe of size 38mm dia 1.2mm & 50x25mm thick crca rectangular pipe 1.2mm thick, head rest designed with 38mm dia with 25mm round support pipes for supporting pillow having height of 810mm, bed mattress structure made from 50x25x 1.2 mm & 25x25x1.2 mm pipes, mattress support panel made of 12mm thick isi/bis grade bwp plywood, mattress panel height from floor should be of 450mm, four number of supports of size 25x25x1.2mm are given to mattress panel, additional 25x25x3mm angle used under ply along with headboard & footboard having length of 100 mm of each, the complete structure should be in knockdown construction and assembled with nut & bolts, all open edges of pipes should be covered by good quality ppcp shoes/caps, . all metal components should be pre-treated with zinc phosphating in minimum 07 tank process and then powder coated with epoxy polyester with approved shade, thickness of coating should be minimum 50 micron. .items should have 5 year warranty., providing study table overall size 900w(+ 05mm) x 600d (+ 05mm)x 750h(+ 05mm) , table top made up of 16mm thick bwp termite proof ply wood , 0.8mm mica on top and 0.6 mm balancing mica on bottom isi/bis standard as applicable for the product with 2mm thick pvc edge bending , understructure made of crca 40x40x1.2mm square metal pipe duly powder coated, understructure crca square metal pipe 40x40mm x 1.2mm thick made in knockdown condition, table provided with one side storage single drawers fixed pedestal with depth of 575mm(+/- 05mm) ,storage should be of size 300 mm (w) and 120 (h). the storage support ms pipe25x25x1.mm . storages made of 1.2mm thick crca metal sheet duly powder coated , all opend ends closed with ppcp caps & shoes, all metal parts shall be welded properly strongly and conformity with regulations, the table structure should be in knockdown condition, all metal components should be pre-treated with zinc phosphating in minimum 11 tank process