Latest juice tank Tenders | Government juice tank Tenders

CTN :45717001

13 Jul, 2026 5.61 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for satisfactory trial. , carry out strengthening work using the channels and angles provided by src and irc and conduct a satisfactory trial. , to fabricate the weak sloppy plates of the donali suit fitted on milo from the given ms plate as per the drawing and give a satisfactory trial. , removing the worn out trpf cover fitted on the mill and making and fitting a new cover using the plate given as per the drawing sample and giving a satisfactory trial. , to carry out the work of tipping the teeth of mill rollers and conduct a satisfactory trial. , to carry out the work of chevron cutting as per requirement on mill rollers and give satisfactory trials. , work involving the errectation of broken teeth on the mill s pressure chute repair of worn out teeth via hard facing and conducting a satisfactory trial run , dismantling the old pressure chute errected on the mill completely replacing the corroded section repairing and welding the damaged parts of the ss plate reassembling the unit fitting it onto the mill , fabricate the juice tank for the mill house using the provided 6 8 mm plate and conduct a satisfactory trial run , removing the bottom of the supply juice tank errecting a 12 mm plate in its place and conducting a satisfactory trial. , manufacturing the bed for the s.r.c. and i.r.c. motor gear and conducting a satisfactory trial. , remove the worn out trpf headstock side plate errect a 6mm plate in its place and conduct a satisfactory trial. , fabricating teeth for the hydraulic grab replacing old or damaged teeth with new ones and conducting a satisfactory trial run. , a dismantling old columns beam channels etc. b manufacturing and installing new columns beam channels etc. , removing the old corroded platform and replacing it with a new one. , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to 20 hp. , dismantling fabricating and erecting weak corroded pipe lines up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 inch and providing a satisfactory leak proof trial.

CTN :45725139

14 Jul, 2026 6.00 Lacs

Sultanpur - Uttar Pradesh

Tender For tender for cane bagass carriar bagass elivetor ke gale huye side plate ko katkar nikalna tatha 5 bata 6 mm nyi purani plate se banakar lagana , cane carriar cane chapar flore shaft ko cane carriar se bahar nikalna tatha usegadi per load karna va wapas aane per truck se niche utarna , cane carriar ke cutter levelar chapar ke hud ko katkar nikalna va nayi purani plate se hud ko marammat naya banakar lagana , inter carriar ke gale w kamjor size plate ko katkar nikalna w uske sthan per 20mm bata 16mm moti plate e sample ke anushar banaker , bagass elivator ki fail a tede traf sut ko eliment karna , bagass elivetor ke gale va kharab bed va spakit ko dismental karna va uske sthan per motor rewinding giar aadi ki fiting ke liye bed banana , mill rollar kalar ko nirdeshanushar banaker lagana kalar me belding karna , transmission giar ke tute cake bed ko nikalna va nirdeshanushar 16mm plate bata 300mm channel se naya banana , vibhinn sthano per gali hui plate ko katkar nayi purani plate se paich lagane ka karya 3mm se 8mm plate tak , mill ke cane carriar ki pratham drive giar may shaft sahit mill haouse me lejakar fitting karna tatha santoshjanak trail dena , boiler ke air hiter ke top cover naye purani plate se naya banakar lagana walding ewam trail dena , mill house ke teeno juice tray ko aluminium electrod se welding karna ewam santoshjanak trail dena , mill house ke rollar ke side plate drawing anusaar banakar lagana ewam welding karna tatha santoshjanak trail dena , head stock ke niche bagal me juice try upar ms plate lagakar welding karna ewam trail dena , cane carriar ke gale huye ewam tedhe huye channel trn aadi ko katkar nikalna tatha uske sthan per punah marammat karke cane carriar lagana , rollar ke veyering guard ko naya banana , rollar ke juice ko naya ya purjo plate se banakar fit karna , cane bagass carriar bagass elivator ke gale huye ranar ko katkar naya ranar lagana egil lagan welding karna , bagass elivator ke gale va kharab sabhi jali ko bahar nikalna tatha nayi jali lagane ke uprant punah fit karna , mill ke suit hud ki gali hui plate ko katkar nikalna tatha uske sthan per nayi purani plate se banakar lagana , purane gale va kamjor dsm skrin ko katkar dismental karna tatha uske sthan per nayi plate se naya dsm skrin banana va jali lagana , bagass boiler ka fan va uske badi ko naya banakar lgana , mill juice tanki ke gale huye batam kon ko katkar nikalna tatha uske sthan per naya banakar lagana va welding karna , mill house per nayi noch plate banana ewam welding kar fit karne ka karya , boilar ke expectra boiler ke gale hue hisse ko katkar nikalna ms plate se banakar lagana welding karna va trail dena , boilar ke gale hue suit bwmas fitter hud ko katkar nikalna tatha naye va purane plate se marammat krna welding va trail dena , boiler ke ander gale hue air heater damfer suit katkar niche utarna tatha naye purane plate se banakar top per lejakar fitt karna tatha trail dena , tothed rollar 800mm dia nayi 16mm plate se banana va uske naye tooth tip draing sempal anusar banakar welding karne ka karya , boiler ke fd fan dampharo ko kaatkar hatana tatha naya banakar fitting karna wa trial dena , air heater ke damphar ke suit ke marammat ka karya belding karna wa trial dena , roller ke ring ko naya plate banakar fit karna , feed roller ke danto ko kaatkar nikaalna wa naya ya marammat karna

Central Government/Public Sector

CTN :45727559

09 Sep, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of stainless steel trough floor size 2500 x 874 x 1.7 as per ref. icf drawing no. scn8-1-3-802 as mentioned in drg no. crws- sk- 971. [ warranty period: 30 months after the date of delivery ] ]

CTN :45587458

02 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For corrigendum : supply of provn of fighting pd constructed by brickwork , entrance canopy , loop hole on three sides , prefabricated steel door , steel double bunk , steel roofing trough srt , ismb 150 x 75mm x 3 point 46 mtr , 12 mm dia tmt bar , 8 mm dia tmt bar , ms binding wire , paint og synthetics enameled , paint brown synthetics enameled , red oxide primer , turpentine oil , painting brush 75mm , hdpe sand bags , wpc is2645 , ceiling at the bottom of ismb , ldpe film , tools and plants one set

CTN :45618193

02 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For corrigendum : supply of provn of arty gun emplacement , mini lightening conductor , solar lantern , fire extinguisher , steel roofing trough

Central Government/Public Sector

CTN :45702805

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45702806

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.

Central Government/Public Sector

CTN :45702702

01 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - p.l. no. 98090719. stainless steel scrap consisting of condemned and unserviceable plain / trough floor / chequered sheets , lavatory pans , pipes / pipe fittings , weld mesh , lavatory inlays , wash basins, dust bins , mugs with / without ferrous chains , mirror frames , wall protectors , liquid soap containers , soap tray , foot step assembly , ratchet assembly ,feeder junction box,el boxes, switch plate cover , shelf below mirror, , commode chute support brackets , hot box , berth supports , adopter for commode , nose plates , fuse boxes , handles , rods, flats , rmpu spares , blowers , accumulator for rmpu coach with / without original non ferrous attachments , chairs ,bottle holders, vessels / utensils , security plates , dressing vessels , and similar items used in canteen / hospital. of sorts and sizes with / without ferrous/ non ferrous/ fibre/rubber ,other original attachments and similar items stainless steel in nature. as is where is basis. segregation and removal of attachments not permitted. note:- cssd / goc electronic weigh bridge to be used for weighment.

CTN :45697891

06 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of suppy and construction of ug amn bunker , steel roofing trough srt of sizes 1800mm , steel roofing trough srt of sizes 2400mm , indian standard medium beam , entrance canopy , isa 25mm x 25mm x 4mm , ms sheet 1 point 6 mm , nut and washer 8mm dia 25mm , ventilator , prefabricated steel door , round tor steel tmt steel bar 12mm , round tor steel tmt steel bar 8mm dia , ms binding wire , prefabricated gel earthing electrode , synthetic enamel paint og colour , synthetic enamel paint dark brown colour , taurpentine oil , red oxide primer , painting brush 100mm dia , oil bound distemper , weather coat exterior paint og , weather coat exterior paint brown , weather coat exterior paint yellow , ldpe film , hdpe sand bags , wpc , cement of 43 grade opc , river sand , aggregate 20mm graded , aggregate 40mm graded , hard core broken boulder , pcc solid bricks

corporations/Associations/Others

CTN :45666714

08 Jul, 2026 15.65 Lacs

Anpara - Uttar Pradesh

Tender For tender for supply of - head end shaft for ssc 170 mm (as per sample)#material: 817m40/en-24 return trough idler shaft for ssc 100 mm (as per sample)#material: 817m40/en-24 snub/idler shaft for ssc 90 mm (as per sample)#material: 817 m40/en-24 roller for the idler shaft of ssc id: 90 mm, (as per sample)#material: 080m40/en-8 roller for the tail end shaft of ssc, id: 100 mm (as per sample)#material: 080m40/en-8 locking collar with grub screw #size: 140x100x25 mm, hole dia: 6.0 mm (as per sample)#material: mild steel locking collar with grub screw #size: 150x110x20 mm, hole dia: 6.0 mm (as per sample) #material: mild steel complete guide wheel assembly #each set contains#1. roller material: 080m40/en-8 #2. bush, material: gun metal lg3-c (grade 1) #3. thrust washer, material: red brass (alloy 230) #4. stub shaft, material: ss 304 #5. hthh nut m48 & washer, material: ms gr 10.9 #6 bearing housing, material: ms #7. gasket for stub shaft mat: neoprene rubber #8. gasket for bearing housing mat: neoprene rubber bell housing for hydraulic pump of ssc of model no. a10vso 45 dfr/31r-vpa12n00 to suit electric motor aeul180m04, #material: pressure diecast aluminum alloy (as per sample)

Juice Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others