Latest karl fischer titration Tenders | Government karl fischer titration Tenders

State Government

CTN :45263804

01 Jul, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

CTN :45648214

02 Jul, 2026 NA

Bathinda - Punjab

Tender For supply of chisel size 150x14 mm , ball peen hammer with fiberglass handle weight 450g , ball peen hammer with fibergalss handle weight 1130g , centre punch sizes 100 mm 150 mm set , wire brush standard set of 6 , sledge hammer with 3 head weights , allen key set of 4 sizes , allen key set of 10 pcs , hacksaw frame size 1 , hacksaw blade 1x12x2 , hacksaw blade 1x12x1 , feeler gauge set of 26 blades in metric , steel rule of length 12inch 300mm to scale , steel rule of length 6inch 150mm to scale , steel measuring tape 5mtr , fiberglass measuring tape 15 mtr , fiberglass measuring tape 30 mtr , spirit level with magnet 30 cm , spirit level with magnet 60 cm , round file set 4 inch , round file set 6 inch , flat file set 4 inch , flat file set 6 inch , half round file set 4inch , half round file set 6inch , oil can for lubricat , manual grease gun of 500ml capacity , manual grease pump of 15kg capacity , tool chest with trol , tool box with 3 comp , iron hammer of weight 500gm with wooden handle , iron hammer of weight 2 kg with wooden handle , hydraulic jack of 50 tonne capacity along with handle , hydraulic jack of 10 tonne capacity along with handle , hydraulic jack of 25 tonne capacity along with handle , sling ropes of 3by4 inch and 3m length , sling ropes of 3by4 inch and 5m length , sling ropes of 1 inch dia and 5m length , sling ropes of 1 inch dia and 3m length , sling ropes of 3by4 inch and 1m length , lifting belt 1tx3m , lifting belt 3tx3m , lifting belt 5tx5m , lifting belt 10tx6m , d to shackles set 1 t , d to shackles set 3 t , d to shackles set 5 t , d to shackles set 10 t , 5 inch angle grinding machine , portable air blower , mechanical screw jac , supply of portable i , ultrasonic thickness , torq wrench 25 to 135nm , impact skts 0.5 inch , torq wrnch 135 to 675nm , impact skts 0.75 inch with 9 sizes , ratchet type torque wrench 540 to 1380nm , impact sockets 1 inc , dial gauge 5mm , dial gauge 10mm , magnetic stand main stem 150 branch stem 150 , vernier calipers range 0 to 8 inch lc to 0.01mm , vernier calipers range 0 to 12 inch lc to 0.01mm , gauge tapewith cali , shims 40x40mm , shims 50x50mm , shims 75x75mm , shims 100x100mm , metal scissor 10 inch , digital outside micrometer range 0 to 25 mm lc to 0.001mm , dial bore gauge 50 to 150 mm , digital depth gauge range 0 to 150 mm lc to 0.01mm , inner calipers of size 6 8 10 and 12 inch , outer calipers of size 6 8 10 and 12 inch , inside and outside circlic plyers straight 7 to 12 inch size , inside and outside circlic plyers bent 7 to 12 inch size , pitch guage 0.4 to 7mm , bearing induction he , numerical and alphabetical punch set , digital tachometer , hydraulic forklift

CTN :45367027

19 Jun, 2026 NA

Panchkula - Haryana

Tender For bid to ras corrigendum : supply of digital verniar calliper 200mm , digital micrometer in inches size 100 to 125 , digital verniar calliper 300mm , digital weighing scale slid base back 50 kgs , digital micrometer in inches size 125 to 150 , digital casti sunshine tester , table vice wench fined type s 3-8 , auto folding aluminum ladder 25mm dia 8 , self supporting extendable telescopic lower type aluminum ladder 20 to 36 , digital varniar caliper 150mm , digital micrometer in inches size 0 to 25 , digital clamp meter , digital multimeter , general trimtree folding aluminum ladder , hand trolley , paper shredder , general purpose folding aluminum ladder 63mm , battery 24v 150 ah make exide , frp wall support ladder size 4 mtr , book case size 66 x 33 x15

Central Government/Public Sector

CTN :45555438

30 Jun, 2026 NA

Agra - Uttar Pradesh

Tender For supply of 3/8" sq drive adjustable torque wrench for controlled bi-directional tightening classified to din en iso 6789-2003 having interchangeable mushroom head, dual scale and micrometer scale for main nm scale, range : 05-60 nm, length - 334 mm (approx.) [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45555602

06 Jul, 2026 NA

Agra - Uttar Pradesh

Tender For supply of adjustable interchangeable torque wrench with spigot end classified to din en iso 6789:2003 type ii class a, with a factory certificate for controlled bi-directional tightening having dual scalefor nm and lbf-ft with micrometer scale for setting interim values. torque range: 80-400 nm, length 648.5 mm (approx.) with open end fittings of size 16 mm, 24 mm, 30 mm, 32 mm and ring end fittings of 16 mm & 34 mm. [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45143851

25 Jun, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various precision measuring instruments for tmd at sikka tps. - insize-1118-150b digital vernier calipers, digital vernier calipers size - 0-300 mm mitutoyo make, vernier caliper "mitutoyo" make, size- 0- 300 mm, vernier caliper "mitutoyo" make, model 532-101 size- 0- 180 mm, vernier caliper "mitutoyo" make, model 532-101 size- 0- 280 mm, vernier dial 0.00 to 200 mm, dial vernier caliper: size: 300mm (l.c: 0.02mm/0.001) suitable to take inside, outside, depth and step precision measurements. dual reading scale (metric and inch). mfg. from hardened ss and satin finish., dial gauge: 0-5mm model no: 1044a, dial indicator plunger type with back lug suitable for magnetic base, height gauge etc. graduation: 0.01 mm, range: 0 mm - 5 mm, dial reading: 0-100, accuracy: 0.013 mm., extension rod, length 150 mm suitable for mitutoyo make dial indicator plunger, mitutoyo dial indicator 0.01mm to 10mm, dial gauge: 0-30 mm model no: 3052a-19, mitutoyo make dial gauge with magnetic stand: 0-10mm, magnetic stand order 70115, mitutoyo make magnetic stand,701, magnetic stand with flexible column, model:7012-10, magnetic stand model 7033 - 10, make mitutoyo, long stem 1 for mitutoyo make magnetic stand 7010, dia 12 mm bottom connector m8x1.25 length 300 mm, long stem 2for mitutoyo make magnetic stand 7010, dia 10 mm length 500 mm, insize telescopic inspection mirror size 32 mm, 360d rotation 500 mm long, adjustable ss handle, feeler guage 0.03 to 0.5mm (184-302s), make; - mitutoyo, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, feeler gauge: 0.01 - 1 mm, length - 300 mm (long leaf). 32 leaves: 0.01 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm., feeler gauge: 0.01 - 1 mm, length - 600 mm (long leaf). 32 leaves: 0.01 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm., measure tape 3 mtr long, measure tape 5 meter, measure tape 30 meter, freemans make measure tape 15 metre long, digital outside micrometer with large digital display. size: 0 - 25mm, resolution: 0.0001 mm., digital outside micrometer with large digital display. size: 25 - 50mm, resolution: 0.0001 mm., mitutoyo make outside micrometer, 0 to 25 mm, 102/217, outside micrometer size - 50-75 mm mitutoya make, outside micrometer size 75-100 mm, outside micrometer 0-150 model 104-135a, mitutoyo make insidemicrometer, range-25 to 50mm, model:141-105, inside micrometer range 50-500 mm lc-0.01mm, mitutoyo make depth micrometer, 00 to 150 mm, 129/116, mitutoyo make depth gauge, range 300 mm,530/119, bore guage 18-35 mm (511 - 701) make: - mitutoyo., bore guage 35-60 mm (511 - 701) make: - mitutoyo., digital bevel protector 150 mm (187-501), make: - mitutoyo, mitutoyo make thread pitch gauge up to 100mm, surface plate, granite as per is 8512-2:1990 size 600x600 mm with stand 755 mm

Central Government/Public Sector

CTN :45547480

22 Jun, 2026 NA

Agra - Uttar Pradesh

Tender For supply of adjustable interchangeable torque wrench with spigot end classified to din en iso 6789:2003 type ii class a, with a factory certificate for controlled bi-directional tightening having dual scale for nm and lbf-ft with micrometer scale for setting interim values. torque range: 150 - 800 nm, length 1345 mm (approx.) with open end fittings of size 24 mm, 30 mm, 32 mm. [ warranty period: 12 months after the date of delivery ] ]

CTN :45506451

25 Jun, 2026 NA

Hoshangabad - Madhya Pradesh

Tender For supply of brunton compass with stand , landform modelssize , aerial photographs coloured , rocks 15 igneous 15 sedimentary 15 metamorphic rocks , topographical sheet , clinometer compass , trinocular polarising microscope , abbes refractometer , digital do meter table model , deonizer 100 p m , digital conductivity meter , spectrophotometer digital 340nm 960 nm , trinocular research microscope led , bp instrument digital , water soil testing kit digital briefcase model , poiseuilles viscosity apparatus , tunnel diode ch app , absorption spectrum of iodine vapour complete setup , ballistic galvanometer with lamp scale attachment , cro 20mhz dual channel 2 trac , ic regulated b eliminator 3 amp , wavelength of monochromatic source , compound bar pendulum , function generator 03hz to 3mhz digital , half wavefull wave bridge rectifier apparatus , lcr resonance app , inertia table , katers reversible pendulum app , carey foster bridge experiment setup , newtons ring microscope , rheostat 100 ohms , thermal conductivity app searls , two stage rc coupled transistor amplifier frequency response , sodium lamp 35w assembly , solar cell ch app , spectrometer 6 , lissajous figure apparatus without cro , vibration magnetometer , tracing table without glass fitted with 2 led tube , vernier transit theodolite , stage micrometer erma , harbarium press , political map of india laminated

CTN :45326601

17 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For corrigendum : supply of equipment for logistics department - paper tearing test measuring range 0 to 1000 mn capacity resolution 0.1 mn indication error 1 % tearing arm 104 1 mm tearing angle 27.5 0.5 tearing distance 43 0.5 mm, paper puncture testing machine energy range of weights - 6, 12, 24 joule per meter accuracy - 2% within full range release angle of pendulum - 90 display - led (digital) 7 segment power - 220v, 50hz,single phase highlights: sample holder - 1 pendulum release mechanism -manual material -mild steel finish - powder coated havel gray & gray combination finish and bright chrome/zinc plating for corrosion resistant finish, weighing machine max capacity (max) maximum load the scale can measure. (3 kg ), min capacity (min) minimum load required for accurate measurement. (0.25 kg), 0.1 g 1 g resolution, sling psychrometer, bursting strength tester capacity: commonly 0 40 kg/cm . accuracy: +or -1 % of the full range (often within 10% to 90% of capacity). resolution: 0.1 kg/cm . operation: microprocessor-based, digital display (lcd/led) with peak hold test fluid: glycerin (approx. 98% purified). power requirement: 220v, single phase, 50 hz. memory. clamping: pneumatic or manual, often with 1/4 hp motor. fluid displacement rate: 95 + or 5 cc/minute., digital micrometer (0-25mm with least count 0.0010) (0 25 mm, 0.001 mm), digital vernier caliper (0-150mm)

CTN :45430790

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of mechanical engineering lab materials - mechanical engineering lab materials, serve motor drive kitinterface l293d motor driver ic with arduino to control direction of rotation of two dc motors), bldc motor kitbldc motor 1 nobldc motor drive -1noinbuilt volt and ammeter and rpm meterinbuilt power supplyinput 230v ac, lvdt trainer kit complete educational trainer for linear variable differential transformer (lvdt) displacement measurement. built-in ac excitation source and signal conditioning circuitry for lvdt operation. micrometer assembly for precise linear movement of the lvdt core. displacement range ~10 mm with clear front-panel adjustments for zero & calibration. digital display (typically 3 -digit) for direct readout of conditioned output/displacement values. test points and banana sockets for signal observation on external instruments. self-contained unit in a durable enclosure with labeled controls and educational layout. includes user manual and patch cords for experiments. operates on 230 v ac, 50 hz mains supply., multi-cylinder petrolphase : single phase load: mechanical load with ropenumber of cylinders : 4displacement : rope brakepower : 65hp,4000 rpm,1396 ccbrand material : mild steelengine type : 4 stroke self startfrequency : 15hzfuel consumption : petrolfuel tank capacity : 5 letermorh s test rig, tail stock assemblyheavy-duty lathe tailstock assembly for training; cast iron body with base, barrel (quill) ~50 75 mm stroke, hand wheel feed, dead centre mt2/mt3, set over screws for taper turning, spindle clamp, complete with all internal parts for dismantling and reassembly; suitable for 300 400 mm centre height training lathe., dc motorvoltage 220-440 v dcpower - 180 w speed - 200 rpm, hydraulic cylinderdouble acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic opreated directional control valve (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., bearing with shaft assemblyteaching unit with shaft 25 35 mm dia mounted in housing with deep groove ball bearings (6205 / 6206 class) at both ends; includes locking arrangements (circlips, lock nuts, covers). designed for repeated removal, cleaning, lubrication and refitting of bearings, with provision to mount on bench or test rig., coupling unit using driving and driven shaft plumber block bearing unit1. the plummer block housingmaterial: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice.2. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm (ideal for lab scale).mounting: adapter sleeve mounting (h-series) to teach students how to lock a bearing onto a smooth shaft.3. shafting and couplingshaft material: ground carbon steel (en8 or en9) for high surface finish.coupling type: * flexible coupling: to demonstrate the bearings ability to handle slight misalignment.rigid flange coupling: to demonstrate traditional direct connection.driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., spring test machine load & displacement sensing load cel * capacity: 0 10 kno accuracy: 1% fs (better if 0.5% fs) displacement sensor * lvdt / digital encodero accur

Karl Fischer Titration Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector