Tender For providing gps enabled diesel operated commercial vehicle in esd, ghaziabad commercial vehicle to carry out the work of carriage of all store materials and distribution transformers from one store center to another store c
Tender For collection and carriage of stone metal for patch work in tohana store in provincial sub division, tohana under the jurisdiction of provincial division pwd (bandr) fatehabad for the year 2025-26 (ch. to a/m of odr in psd tohana for the year 2025-26)
Tender For repair rennovation of ms tari - preoviding and laying slip clearence in ordinary soil, earth work in excavation all kind of soil, distempering with oil bound washable distemper of approved brand and manufactue two or more coats, providing and laying vertified floor tilles, providing and laying m 10 30% stone, supplying and placing of stone in plumb conc, shuttering of wooden planks, providing and laying m 20, reinforcement for rcc work cutting bending binding placing all complete job, carriage of sand bajree from 40 km by mt 100 mtr h/l, carriage of stones 500 mtr by hl, add cost of sign board
Tender For corrigendum : name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special a
Tender For supply, installation, testing and commissioning of horizontal lifeline safety system for old lifting shop, new lifting shop, bogie shop, wheel shop & ac shop with accessories as per technical specification at annexure-a, scope of work at annexure-b & special condition of contract at annexure-c at carriage repair workshop, mancheswar.
Tender For a/mtc of l/s work in u.e kaithal for the year 2025-26.( hiring of brush cutter, carriage of malba etc in u.e. kaithal and all other work contingent thereto.)
Tender For carriage of light melting scrap(lms) items consisting of wagon body(in dismantled/cut conditions), wagon cbc components without rubber(for example couplers and draft gears without pads), wagon bogies(in dismantled condition), wagon end buffers, yoke, knuckles, springs(including springs used in casnub bogies), ms angles, tie bars, ms panel sheet & wagon door, ms sheet, scrap ms melting, ms adopter wide jaw and narrow jaw, ms cub spacer, ms shearing plate, bogie frame bolster, ms plate, ms ingot and others; from various railway units in india to rail wheel factory, yelahanka, bengaluru-560064; distance:0-500kms (with a minimum chargeable distance of 100kms), by road.special note: the consignor railway authorities shall ensure that cast iron and/or sulphur embedded items are not offered for loading.note: the work involves other intermediary and ancillary activities such as:(a)collection of lms (b)loading the lms into the vehicle. the contractor shall load only those lms items which are free from rubber components or any other attachments(c)unloading at destination, by railways at free of cost.quantity: 5500 mt. special note: (1) tenderers should quote the rates based on the diesel price of rs.90.99 per litre prevailing at bengaluru as on estimation date i.e., 03.10.2025 and the same shall be considered for the purpose of evaluation. (2)mandatory documents should be submitted in compliance of: bid security conditions including annexure vi(a), annexure-v, annexure-v(a), annexure-vi(b), power of attorney and iba certification. (3) non-submission of necessary documents in support of the above may result in rejection of bids.