Latest lantern restrictor Tenders | Government lantern restrictor Tenders

CTN :45655569

08 Jul, 2026 NA

Bokaro - Jharkhand

Tender For supply of spares of ash slurry pump, drain sump pump , seal water pump of boiler 9 and dredge pump of tpp and cpp boiler - ash slurry pump, model: ar 300/550earlier pump serial no. : 15206-15208, cat. no. 09000512014 bearing housing material: is 210 fg 260part no. 3, cat. no. 0900051201 end cover (bearing cap outer) material: is 210 fg 260part no. 5, cat. no. 09000512012 expeller housing material: alloy cr (280-320 bhn) part no. 9, cat. no. 09000512013 expellermaterial: nihard type iv (550 bhn)part no. 14, cat. no. 09000512005 labyrinth (pump end)material: astm a 743 cf8part no. 14p, cat. no. 09000512006 labyrinth (drive end)material: astm a 216 gr wcbpart no. 14d, cat. no. 09000512017 lantern restrictor material: astm a 743 cf8mpart no. 13, cat. no. 09000512015 flange (suction cover)material: astm a 216 gr wcbpart no. 70, cat. no. 09000512026 grease retainermaterial: is 210 fg 260part no. 7, cat. no. 09000512027 split glandmaterial: astm a 216 gt.wcbpart no. 10, cat. no. 09000512004 piston ring (01 set = 04 nos.)material: is 210 fg 260part no. 51, cat. no. 09000512018 suction cover material: astm a 216 gr. wcbpart no. 21, cat. no. 09000512008 wear plate (s.side) with insert material: nihard type iv (550 bhn) part no. 19, 19i, cat. no. 09000512007 wear plate (b.side) with insertmaterial: nihard type iv (550 bhn)part no. 16, 16i, cat. no. 09000512001 shaft sleeve material: astm a 743 ca 15 part no. 12, cat. no. 09000512002 impeller with nut & boltmaterial: nihard type iv (550 bhn) part no. 18 & 38, cat. no. 09000512009 outer casing setouter casing top - 01 no.outer casing bottom - 01 no.material: astm a 216 gr. wcb part no. 20 & 15, cat. no. 09000512029 vary pitch pulley assembly (5 grooves)material: is 210 fg 260, overflow drain pump, model : vg 80/250+arsearlier pump serial no. : 15221-15222, cat. no. 09000510012 bearing cap-i (bottom)material: is 210 fg 260part no. 37.052, cat. no. 09000510003 bearing housing (top) material: is 210 fg 260part no. 36.052, cat. no. 09000510005 bearing cap i (top)material: is 210 fg 260part no. 37.053, cat. no. 09000510013 oil seal material: syn rubberpart no. 92.152, cat. no. 09000510004 bearing housing (bottom)material: is 210 fg 260part no. 36.053, cat. no. 09000510011 lantern ringmaterial: bs 970 en8part no. 46.10, cat. no. 09000510017 gland ringmaterial: ls 318 gt. ltb 2 part no. 46.9, cat. no. 09000510002 single shaftmaterial: bs 970 en8part no. 22.352, cat. no. 09000510014 strainermaterial: is 1239 part i heavy part no. 63.03, cat. no. 09000510010 shaft sleeve (p.end)material: aisi 410part no. 53.5, cat. no. 09000510001 impellermaterial: 27% hichromepart no. 24.2, cat. no. 09000510016 wear platematerial: 27% hichromepart no. 14.7, cat. no. 09000510008 bush housingmaterial: is 210 fg 260part no. 17.3, cat. no. 09000510006 bearing bedmaterial: is 210 fg 260part no. 35.152, seal water pump, model : tch+n 25/180-iearlier pump serial no. : 16882-16883, cat. no. 09000511009 shaft sleeve (p.end)material: aisi-410part no. 53.6, cat. no. 09000511007 lantern ringmaterial: aisi 410part no. 46.10, cat. no. 09000511015 gland split material: is 210 fg 260part no. 46.4, cat. no. 09000511013 oil seal set (pump and drive end) material: synthetic rubberpart no. 43.13, 43.3, cat. no. 09000511004 bearing adopter material: is 210 fg 260 part no. 37.21, cat. no. 09000511003 bearing housing material: is 210 fg 260part no. 36.7, cat. no. 09000511010 helicoil insertmaterial: aisi-316part no. 94.21, cat. no. 09000511005 deflector ringmaterial: aisi 304part no. 51.9, cat. no. 09000511001 impellermaterial: is 210 fg 260part no. 24.2, cat. no. 09000511002 pump shaft material: bs 970 en8 part no. 22.3, cat. no. 09000511011 stuffing box covermaterial: is 210 fg 260part no. 17.3, drain sump pump, model: vo 80/250+arsearlier pump serial no. 16522-16528, cat. no. 09000510101 bearing bed material: is 210 fg 260part no. 35.152, cat. no. 09000510102 ratchet collar material: ls 2062 ms part no. 53.852, cat. no. 0

CTN :45600345

30 Jun, 2026 18.98 Lacs

Jhalrapatan - Rajasthan

Tender For supply of spares for m/s weir minerals make pumps installed in bottom ash handling system of 2x600 mw, katpp, rvun, jhalawar.- piston ring , bearing seal, , labyrinth, , labyrinth drive end, , volute liner seal, , shaft sleeve o ring, , discharge joint ring, , intake joint ring, , shaft sleeve, , lantern restrictor, , gland, , stuffing box, , seal ring, , impeller o-ring, , shaft spacer, , shaft, , impeller, , bearing housing, , end cover, , end cover drive end, , end cover gasket, , end cover set screw, , frame plate liner stud, , frame plate (d21) body casing inner, , gures

CTN :45605518

30 Jun, 2026 18.98 Lacs

Jhalawar - Rajasthan

Tender For supply of spares for m/s weir minerals make pumps installed in bottom ash handling system of 2x600 mw, katpp, rvun, jhalawar. - bearing assembly (refer drg. k3-110-0-400655) , piston ring , bearing seal , labyrinth , labyrinth drive end , volute liner seal , shaft sleeve o ring , discharge joint ring , intake joint ring , shaft sleeve , lantern restrictor , gland , stuffing box , seal ring , impeller o-ring , shaft spacer , shaft , impeller , bearing housing , end cover , end cover drive end , end cover gasket , end cover set screw , frame plate liner stud , frame plate (d21) body casing inner

corporations/Associations/Others

CTN :45611373

03 Jul, 2026 22.04 Lacs

Jhansi - Uttar Pradesh

Tender For supply of lantern restrictor g11832c23 108ff ah , throat bush g8083 indure , frame plate liner insert for asp indure , bearing housing for asp 918321 , shaft sleeve ash slurry pump 108ff ah , shaft sleeve o ring 108ffah asp , pump shaft for asp 918321 , seal ring for ash slurry pump 918 321 , discharge seal ring for asp 918 321 , end cover for asp 918321 , impeller release collar for asp , stuffing box g073 g01 for asp , shaft spacer fam117e02 ash slurry pump , o ring for ash slurry pump

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

State Government

CTN :45442807

11 Jun, 2026 84.87 Lacs

Umaria - Madhya Pradesh

Tender For procurement of spares of sam make lp water model annual repair 150 510 sl no 11611 to 11614 and recycle pump annual repair 150 510 sl no 11702 installed at ahp of unit no. 3 and 4, sgtps, mppgcl, birsinghpur - bearing housing, end cover, base & top cover, lantern restrictor, impeller with nut and bolts, outer casing, shaft with keys, volute (inner casing), wear plate (b.side) with insert, wear plate (s.side) with insert, shaft sleeve, split gland [1 no = 2 halves], expeller housing, expeller, dome nut (1 set=08 nos.) & t-bolt (1 set=06 nos.), suction cover, key (shaft sleeve / expeller), key (coupling), laybrinth (pump end), laybrinth (drive end), flange suction cover, grease retainer, piston ring set (1 set = 4 nos), lock nut, bracket side cover, coupling (dia 280 mm), fastener set, suction flange gasket (rubber gasket), .

State Government

CTN :45418513

23 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For supply of kids play item - kids play equipment, double swing (2-seater swing), four seater swing, double swing 4 seater, multi-seater circular swing (merry-go swing), 8-seater merry-go- round (mgr), elephant rider, animal swing (single/double seater frp animal shape), elephant slide, double see-saw, 10-seater round merry-go- round (large mgr), adventure tyre climbing., commando net climbing, adventure patiya (wooden plywood) walk, adventure tyree walk, kids multiple adventure play zone 3 in one, leg press double, triple twister, horse rider dimensions, outdoor double air walker, dinosaur shape slide, seater round chakri main frame, leg press machine (seated), bench press two seater, chest press (seated) double, parallel bars, sit-up bench / inclined board, rowing machine, cycle (air bike), swinging bridge, ladder crossing, tyre swing, small siwing, net crossing, burma bridge, tyre walk, double twister, shoulder wheel /rotation, single twister, chest press singal seater, arm and paddle bike, kids multiple play zone 4 in one, giraffe slide big, rocker, satellite climber, jumbo spiral slide, 3 piece tunnel slide, double slide fun, theme based decorative dustbins, rcc garden bench three-seater, iron 3-seater garden bench

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :45294255

26 May, 2026 14.24 Lacs

Pune - Maharashtra

Tender For auction sale of plot - all that piece and parcel of the property bearing plot no. 16-17-18/b-c-2, area admeasuring about 64.80 sq. mtrs., having revenue survey no. 179 which was recorded under city survey sheet no. 103, chalta no. 2, city survey no. 257/16-17-18 together with construction thereon situated at near the ghanghali railway crossing near the swaminarayan gurukul, beside patel farm, village-sihor, taluka- sihor and district-bhavnagar, gujarat. property bounded as under; north: plot no. 16, 17, 18/b-c/1, south: plot no. 16, 17, 18/b-c/3, east: 07.60 mtrs., wide road, west: adjoining plot no. 23, 24 and 25, owned by makwana gavuben dayabhai, makwana umeshbhai dayabhai, makwana rahulbhai dayabhai

CTN :45236324

06 Jun, 2026 4.20 Crore

Pune - Maharashtra

Tender For supply of category vi cardio and interventional radio consumables - intra vascular lithotripsy balloon for coronary usage in highly clacified lesions,assorted sizes, sirolimus coated balloon,phospholipid carrier to avoid drug shedding,nanolute technology,100% balloon surfece technology,low crossing profile,assorted sizes, ptca guide wire with tip load 0.8gm and spring coil length 20 cm and one piece core wire with joint less spiring coil and slip coat (hydrophilic coating) over the 20 cm spiring coil, ptca guide wire length 180 cm with tip load 1.0 gm with polymer sleeve length 22 cm with slip coat (hydrophilic coating) and one piece core wire with joint less spring coil., ptca guide wire with tip load 0.8 gm and polymer sleeve length 16 cm with slip coat (hydrophilic coating) and diameter of wire 0.014 inch with tapered tip of outer dimeter 0.0009 inch (0.23mm)., cto ptca guide wire length 150 cm with tip load 1.7 gm and micro cone tip for superior penetration and composite core contruction with multiple wire components., inflation device (indeflator) kit for angioplasty ., high pressure 2 port manifold., angioplasty kit (insertion tool,y adaptor and torque device)., coronary control syringe with ring plunger grip 12 ml., inoue percutaneous transve-nous mitral commissrotomy balloon complete with accessories sizes-26, ptca guidewire with tip load 0.5 gm and silicon coating on distal 1.5cm and slip coat (hydrophilic coating) of 18.5 cm after silicon coating from the tip 1.5 cm with composite core contraction with multiple wire components comprising of rope coil and twist wire mounted on the core wire.

Lantern Restrictor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

State Government

State Government