Latest length board Tenders | Government length board Tenders

State Government

CTN :45429436

18 Jun, 2026 6.50 Lacs

Jhunjhunu - Rajasthan

Tender For corrigendum : supply of ortho implants open tender - k- wire sterile all size , tension band wire , s.s wire , s.t. pin 4.5 mm , skeleten traction set , b.k. spounge traction set , thomous splint all size , interlock nail humurous set with size nails , square nail set with all size nails , rush nail set with all size nails , interlock nail tibia size 8 to 11dia and 26 to 38 length , interlock nail set femer with all isize nails 9 to 12 mm dia and 36 to 44 mm length , dhs set , biopolar set , malleolar screw size 30 mm to 60 mm , cannuculized cannuculous screw set 6mm, (25 mm to 100 mm) , guide wire for tibial nail $ femer nail , small dcp 6 to 10 hole plate (3.5 mm cortical screw bod 12 mm to 22 mm) , narrow dcp set 7 to 10 hole , cortical screw box 4.5 mm dia & 24 to 44 , mm length , board dcp set 7 to 12 hole plate , locking plate small lcp 7 to 10 hole plate , loking plate narrow lcp 7 to 11 hole plate , locking plate broad lcp 7 to 15 hole plate , locking distal femoral plate 7 to 15 hole plate , cannuculous locking screw box 5 mm dia & 14 to 100 mm length , recon plate 5 to 10 hole plate , expert tibia interlocking nail dimeter 8-12mm and length 28-38mm with four locking screws , pfn nail short ss all size with for locking screw all size with related instrument box as sr. no. 6 , pfn nail longt ss all size with for locking screw , locking olecranon plate (lt.& rt. with 3-14 holes) , locking distal medial tibial plate 2.7/3.5 mm (lt.& rt. with compatible standard locking screw all size) , proximal humerus locking plate (low profile)-3-12 holes with compatible locking and non locking head screw self tapping any size and number as per holes , proximal lateral tibial locking plate l/r 5-13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible locking 5.0 mm locking head screw self tapping , elastic nail of all size & diameter (s.s) , elastic nail of all size & diameter (titanium) , jess fixter set all size , febula plate set , small dcp set , k wire set , distal radius plate set , tennys band wiring set , distal tibia plate set , tibia nail set , philas plate set , comulaeted cancilious serew set , l.c. proximal fenar plate , tit elastic nail set , proximal femer nail set , radious plate set , humerous plate set , bi condyler plating set , both bone set , lateral/hocky plate , ot on gown , ot hole towl , ot big towl , ot small towl , ot dress xl size , ot dress xxl size , ot dress l size , thr set , b , tkr set

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

CTN :45224610

15 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : tender for supply of power quality measurement system , design and submission of design documents , fai reports and type test reports , deliverables as per erts , printed circuit boards , microprocessor details , spares and consumables for cmc period , tools required for cmc period , training , training manual andsystem

CTN :45401502

16 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for metrology and measurements lab and machine tools technology lab for mech department. - digital vernier caliper* measuring range: 0 200 mm * least count / resolution: 0.01 mm * accuracy: 0.02 mm * material: hardened stainless steel * measurement: outside, inside, and depth measurement * display: digital lcd * power supply: battery operated * protection: ip54 or better * make: reputed brand such as mitutoyo / insize / baker or equivalent, digital micrometer* measuring range: 0 25 mm * least count / resolution: 0.001 mm * accuracy: 0.002 mm * measuring faces: carbide tipped * display: digital lcd * repeatability: 0.001 mm * protection: ip54 or better * power supply: battery operated * material: hardened stainless steel frame* make: reputed brand such as mitutoyo / insize / baker or equivalent

CTN :45154800

09 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras supply of air comp d cyl 200 ltrs tank 3hp 3ph motor with nrv a cut air inflator comp set , ark welding set 200 amp with 20 mtr cable and holder complete , air gun with spring type pipe , air impect gun heavy duty , alien key 03 mm 10 mm , bench vice heavy duty , battery charger c 12 72 , battery load tester , boost cable , centre punch 6 inch , circlip plier inner heavy duty , circlip plier outer heavy duty , cold flat chisel 6 , combination plier , complete mechanic tool box steel three fold with tools , copper welding cable , crash helmat , dah with handle , de spanner set 06 pic 8x9 to 18x19 , de spanner set 12 pic 8x9 to 30x22 , diesel spray gun , digital multimeter , drill bit set , electronic welding screen , eletrode holder , envil 100 kg , file flat bustard with handle 12 , fire extinguisher half kg , first aid box , foot pump electric , gear box trolly jack , goggles for motor cycle , grease gun bucket 20 kg air operated pneumatic , hammer ball pen 2 lbs with handle , hand drill machine , hand gloves leather , hand grinder , hexa frame , hub puller heavy vehicle , hydraulic jack 5 ton , hydrolic trolly jack 03 ton , hydrolic trolly jack 10 ton , hydrometer , hydrualic press hand oprated small , impact screw driver , inspection lamp with 5 mtrs wire and clip , iron trey 24 inch x 18 inch x 3inch with handle , iron trey 36 inch x 24 inch x 3 inch with handle , mechanic trolly creeper , oil cane 250ml , oil filter openner multy purpose , pad lock with key , paint spray gun , pick axe 4 5 lbs , pipe wrench 16 inch , plier adjustable , plug spanner mpfi , piston ring compressor , screw driver 10 inch , screw driver 6 inch , screw driver philips 6 inch , shawel , socket spanner 6mm to 14mm with complete ) /bid number : gem/2026/b/7526987 * /dated: 11-05-2026 & & / bid document 1 / 104 shawel , socket spanner 6mm to 14mm with complete attechment , socket spanner hexagonal 8mm to 32mm , soldring iron 125w heavy duty , soldring paste 50 grm pack , soldring wire 08 mm 50gm pack , spanner adjustable 8 , tool box steel two fold , torque wrench 250 lbs , torque wrench 3 mkg to 7 mkg , tubeless tyre puncture kit , tyre pressure gauge , tyre inflating hose , tyre lever heavy duty taparia , vaccum cleaner big size nt 70 2 , valve die , water thermameter digital , welding hand safety gloves leather , alien key 17mm , adjustable wrench 300 mm , cold flat chisel 19 mm , cold flat chisel 17mm , file square with handle 6 , file flat bustard with handle 6 , file flat round smooth handle 6 , file flat bustard with handle 10 , fire extinguisher 2 kg , fuel funnel small , fuel funnel big , filler gauge , grinder stone 4 , hand grinder elerical , measurement 200 ml , measurement 250 ml , measurement 500 ml , measurement 1 ltr , measurement 2 ltr , measurement 5 ltr , nose plier 6 , pipe wrench 10 inch , piston ring compressor big , piston ring compressor small , piston ring expender heavy veh , piston ring expender light veh , rottery pump , ring spanner 6x7 to 30x32 , screw driver 8 inch , screw driver 4 inch , screw driver philips 8 inch , screw driver philips 4 inch , screw driver combination kit , scissor 8 , steel foot rule 12 , spark plug spanner 21 no , tong 16 inch sandasi , tool box steel three fold , trolly for carring engine assy jib crane hv vehicle , tyre inflator machine heavy vehicle with accessories , tyre inflating hose with nozzle air comp d cyl 200 ltrs tank 3hp 3ph motor with nrv a cut air inflator comp set, ark welding set 200 amp with 20 mtr cable and holder complete, air gun with spring type pipe, air impect gun heavy duty, alien key 03 mm 10 mm, bench vice heavy duty , battery charger c 12 72, battery load tester , boost cable , centre punch 6 inch, circlip plier inner heavy duty, circlip plier outer heavy duty, cold flat chisel 6, combination plier , complete mechanic tool box steel three fold with tools, copper welding cable , crash helmat, dah with handle, de spanner set 06 pic 8x9 to 18x19, de sp

Corporations And Associations And Others

CTN :45328794

11 Jun, 2026 19.95 Lacs

Delhi - Delhi

Tender For corrigendum : providing t and p items and garden tools for ward no. 171 (cr park) south zone - providing t & p items and garden tools for ward no. 171 (cr park) south zone., supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigssaw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16"pole type: light weight telescopic tubular aluminum alloy extendable poleno of positions for pole heightadjustment: 10 positionslocking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration, on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle: should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 525 to 549minimum cut height 20 millimetermaximum cut height 80 millimeterblades hardened steelnumber of blades 1number of positions for cut height adjustment 6number of levers for cut heightadjustment: single levernumber of wheels 4front wheel size 203 millimeterrear wheel size 250 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity 1.4 ltr., supply of synthetic enamel paint in all shades as per required and direction of officer-in-charge., petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be mor

State Government

CTN :43964196

12 Jun, 2026 NA

Tapi - Gujarat

Tender For corrigendum : supply of various types of consumable items and miscellaneous items for day to day maintenance works for emd-6 utps. (emd-6 et-6203) - carbon cleaner spray, puff seal have polyurethene based foam sealing compound, stanvac pen oil rust remover 6030,500 ml/pac, 6084 red insulating varnish (500 ml) can, 901 easyclean (nf) 500 ml. spray can - on line electrical contact cleaner., 415v offline contact cleaner (700ml tin), z955 (sl) srippex sltape roll (silicon rubber, self amalgamating, high temperature resistance tape size:-25mmw0.50mmw15mtr./roll, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, self expanding cfc free one component polyurethane foam sealant. product2206 360 puf 3x in 700 ml spray can., w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, temperature measurement laser gun., araldite 180 gram/tube, z 801 fast steel epoxy stick (1 stick 114 grm), emery cloth roll 50mm w x 50 mtr grit 220 extra fine, cable tie 100 mm, cable tie 150 mm, cable tie 200 mm, impact wrench power/battery operated, taparia make utility knife. product no. uk-3., cordless screw driver power/battery operated, tools bag (taad patri type, thick cloth) with 3 to 4 pockets for artisian tools having size 16" x 4" x 10"approximate, weighing scale digital, crc-226 contact cleaner in 415 ml/300 gram spray bottle., wd -40 industrial 420 ml wd 40 spray bottle for rust removing purpose, hss ground thread hand tap set m 10x1, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 ,size; 12mm, molykote 1000 spray can (400ml/270gms/can), electrically operated angle grinder, size: 100 mm, model no:gws 6-100 g,p no: f002 g30 050, make: bosch, digital multimeter 4.1/2 digit (true rms), loctite 242 thred locking 250 ml/tube, 2 tb external usb powered hard disk, pebble ral 7032 color spray bottle for electrical ht / lt panel, high voltage detector, rubber hand gloves, long rang rechargeable torch with charger., ag-4 cutting wheel make:bosch, buffing wheel , size: 100 x 16 x 5/6 mm, circlip plier pvc dip coated sleeve , internal (straight nose type ) ,cap 19mm to 60mm, 185mm length, product no.1441-7n, external circlip plier ( straight nose type ) cap 8 mm to 25 mm.product no:1443-5s, hss ground thread hand tap set m 4x0.7, hss ground thread hand tap set m 5x0.8, hss ground thread hand tap set m 6x1, hss ground thread hand tap set m 8x1.25, hss ground thread hand tap set m 10x1.5, hss ground thread hand tap set m 12x1.75, hss ground thread hand tap set m 14x1.5, digital ma clamp on meter

State Government

CTN :44135893

05 Jun, 2026 76.7 Thousand

Nagpur - Maharashtra

Tender For bid to ras corrigendum : supply of hydrocarbon accelerant detector or gas detection unit , measurement and documentation equipment , forensic tools and evidence handling tools , electrical and mechanical tools , personal protective equipment , carrying case

State Government

CTN :45377341

20 Jun, 2026 NA

Multi City - Telangana

Tender For tggenco-nshes- supply of certain tools and plants material at nshes, nagarjuna sagar.- surface plate, box type, as per the drawing enclosed. plate dimensions: 460x460 cm, plate thickness: 18 mm with 2 handles on both sides, material of construction of top surface plate: cast iron made of precision grinding and lapping confirming to is 2285-2003 surface plate, box type, as per the drawing enclosed. plate dimensions: 460x460 cm, plate thickness: 18 mm with 2 handles on both sides, material of construction of top surface plate: cast iron made of precision grinding and lapping confirming to is 2285-2003 yes, master level, sensitivity: 0.02 mm/m, length-200mm, width-40mm , make: insize, model: 4902-200 master level, sensitivity: 0.02 mm/m, length-200mm, width-40mm , make: insize, model: 4902-200 yes, hydraulic trolley of 2.5 ton capacity, make: stanley, style: cpt-25 hydraulic trolley of 2.5 ton capacity, make: stanley, style: cpt-25 yes, feeler gauge, measurement range: 0.05mm to 0.8mm, blade length: 100mm, no. of blades: 10, make: mitutoyo, model: 184-306s feeler gauge, measurement range: 0.05mm to 0.8mm, blade length: 100mm, no. of blades: 10, make: mitutoyo, model: 184-306s yes, barrel hand pump, for oil barrel, hand operated heavy duty rotary barrel pump for liquid transfer from a standard barrel size of 210l with inbuilt inlet strainer, body material: cast iron/ stainless steel, suction tube length: 1090 mm(min), discharge: 0.25l/rotation(min) barrel hand pump, for oil barrel, hand operated heavy duty rotary barrel pump for liquid transfer from a standard barrel size of 210l with inbuilt inlet strainer, body material: cast iron/ stainless steel, suction tube length: 1090 mm(min), discharge: 0.25l/rotation(min) yes, hand drilling machine, size-1/2 inch, 600 watt, make: bosch, model: gbm13re hand drilling machine, size-1/2 inch, 600 watt, make: bosch, model: gbm13re yes, grinding machine ag4 portable, wheel dia:100mm, make: bosch, model: gws 750-100 grinding machine ag4 portable, wheel dia:100mm, make: bosch, model: gws 750-100 yes, hydraulic jack set with ram, hand pump, hose with nrv, gauge, capacity:100ton, storke:2 inch, make: enerpac and model: rcs-1002/ make: power team and model:rss-1002 hydraulic jack set with ram, hand pump, hose with nrv, gauge, capacity:100ton, storke:2 inch, make: enerpac and model: rcs-1002/ make: power team and model:rss-1002 yes, cordless m10-m24 battery driven impact wrench with full kit including batteries, make: bosch, model: gds 18v-1050 h cordless m10-m24 battery driven impact wrench with full kit including batteries, make: bosch, model: gds 18v-1050 h yes, corded electric rotary hammer with sds plus, make: bosch, model: pro gbh 220 corded electric rotary hammer with sds plus, make: bosch, model: pro gbh 220 yes, crimping tool, electric, corded, 120kn, 25 to 400 sq.mm, make: jainson, model: bijlee 400 crimping tool, electric, corded, 120kn, 25 to 400 sq.mm, make: jainson, model: bijlee 400 yes, bench vice, opening x width:190x150mm, bvsgm8, 27-29kg , make: stanley/taparia bench vice, opening x width:190x150mm, bvsgm8, 27-29kg , make: stanley/taparia yes, 1/4 inch + 1/2 inch square drive ratchet set 57-piece set with carrying case make: bosch, model: 1600a02z9g 1/4 inch + 1/2 inch square drive ratchet set 57-piece set with carrying case make: bosch, model: 1600a02z9g yes, motorised barrel pump 0.5 hp, 350 watts / single phasein built on- off switchmaximum discharge flow: 60-70 lpm, discharge pressure: 10 m water columnsuitable for 200-210 ltr barrel /50 ltr cansmaterial: stainless steel 316, pump tube length: 1250 mmsuction tube size: 44 mm diasuction tube length: 1250 mm, outlet size: 1 inch dia motorised barrel pump 0.5 hp, 350 watts / single phase in built on- off switch maximum discharge flow: 60-70 lpm, discharge pressure: 10 m water column suitable for 200-210 ltr barrel /50 ltr cans material: stainless steel 316, pump tube length: 1250 mm suction tube size: 44 mm dia suction tube lengt

CTN :45386617

06 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For ece lab items dept use - eliminator transformer (step-down) kitinput - 220v - 240v ac, 50 hz, output-2v to 12v dc, 0-2 a ripple: 5mv, strain gauge trainer kitmetal foil strain gauge mounted on beam/cantilever strain measurement under applied load wheatstone bridge arrangementsignal conditioning and amplification circuitinstrumentation amplifiers, 3 digit display of strain / output voltage zero and gain adjustment controlsprovision for applying calibrated loads regulated power supply, 230 v ac, 50 hz table-top trainer with labeled paneltest points to measure the signalsbuilt in power supplies and wooden closed cabinet supplied with patch cords and experiment manual, temperature measurement kitsensors: rtd (pt-100), thermocouple (fe-k/j-type), and/or thermistor (ntc).display: 3 digit led/lcd digital display (typically 200mv fsd). temperature source: portable water kettle or heater block.signal conditioning: on-board circuitry for amplification, linearization, and cold junction compensation.test points: multiple 2mm/4mm banana sockets for monitoring input/output signals.power supply: 230v ac, 50hz, single-phase.accessories: includes a glass thermometer, ntc thermistor probe 10k, k-type thermocouple probe, patch cords, and instruction manual., sim reader trainer kitsim compatibility supports 2g 3g 4g lte sim cards,sim reader mode: reading writing gsm sim card data, imsi, ki codes, phonebook interface usb 2.0 or rs 232 serial port for pc communication.clock frequencies: selectable frequencies 3.579 mhz, 7.159 mhz, 14.318 mhz for sim card operation.power supply: onboard smps 12v 2a or 5v dc with overload protection. hardware components:6-pin or 8 pin sim card socket.led indicators for power, sim reset, and data activity.optional lcd 128x64 and keypad 20 keys for standalone operation. software tools support for at commands gsm etsi 07.0707.05, sim manager utilities, and data logger functionality. common trainer kit featuresfault simulation ability to create faults e.g., sim not detected, vcc failure for troubleshooting.test points: multiple test points e.g., 55 nos for observing signals sim rst, clk, i o via oscilloscope.construction tested glass epoxy pcb, often housed in a study educational case., dual output regulated dc variable power supplydual output regulated power supply- input voltage: 230v/50hzac- output voltage: (0 30v)dc- output current: (0 2a)dc- protection circuit: over voltage and over current protection, short-circuit protection- high efficiency: greater than 85%- low ripple and noise: less than 50 mv, lvdt sensor trainer kitac mains power supply : 230v 10%, 50hzfixed regulated dc power supply : +5v, 12v 500matransducer : lvdtlvdt displacement : 20mm (40mm total)displacement scale : linear 20mmdisplacement display (mm) : red color 3 digit led displayexcitation frequency : 4khzexcitation voltage : ac variable 5v, dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc, accuracy: class 0.5( 0.5 % full-scale), dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc, accuracy: class 0.5 ( 0.5 % full-scale)

Length Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Corporations And Associations And Others

State Government

State Government

State Government