Latest lifting magnet repair Tenders | Government lifting magnet repair Tenders

Central Government/Public Sector

CTN :45736742

27 Jul, 2026 NA

Yamunanagar - Haryana

Tender For supply of feeder contactor, current rating 200 amps, voltage rating 750v ac main pole: 4 nos., aux contact: 2no + 2nc, control voltage-380-415v ac with surge suppressor for net-1 & net -2 in sbc of lhb ac coaches confirming to item no. 57 & 58 of bom of rdso specification no. rdso/pe/spec/ac/0184-2015 (rev-0). [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736402

13 Jul, 2026 NA

Hubli - Karnataka

Tender For supply of contactor - ac- 3 pole - 150 amps to emd part no. 40034361 to blw part no.18140051 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45736149

07 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply of k44 contactor for 60 kva transformer rated current: 200 a, rated voltage: 690v ac, main pole: 4, aux contact: 01no+1nc, control voltage: 230v ac (168 v ac-300 v ac means 230v ac +/-30%) with surge suppressor. confirming to rdso specification no. rdso/pe/spec/ac/0184-2015 (rev. 2) 2026 or latest. make: abb (model no.- af116-b40), firm should submit test report & tender specific authorization from oem. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

Central Government/Public Sector

CTN :45712902

22 Jul, 2026 NA

Koraput - Odisha

Tender For tender for supply of abb make spares for blower vfd panels - power contactor model no - a185-30 3-pole coil voltage- 230vac 50 hz ac-1 rating- 275amps with auxillary contact- 1no + 1nc make- abb , power contactor model no - af205-30 3-pole coil voltage- 230vac 50hz ac-1 rating- 350amps with auxillary contact- 1no + 1nc make- abb , power contactor model no - ax150-30 3-pole coil voltage- 230vac 50hz ac-1 rating- 190amps with auxillary contact- 1no+1nc make- abb , power contactor model no.- ax32-30 3-pole coil voltage- 230vac 50 hz ac-1 rating- 55amps with auxillary contact- 1no + 1nc make- abb , contactor model no.-n40e coil voltage- 230vac 50 hz with auxillary contact- 1no + 1nc make- abb , overload relay model no.- ta200du range- (110 - 150)amps make-abb , overload relay model no.- ta200du range- (130 - 175)amps make-abb , overload relay model no.- ta110du range- (66 - 90)amps make-abb , overload relay model no.- ta110du range- (88 - 110)amps make-abb , overload relay model no.- ta42du range- (22 - 32)amps make-abb , mccb model no.- tmax t3s-250 rating- 250amps make-abb , mccb model no.- xt1s-160 rating- 160amps make-abb , timer model no.- ct-yde time range- (0.3-30)sec supply- (220 - 230)vac make- abb , spare coil for contactor model no.-a145-30 rating- 230vac make-abb , spare coil for contactor model no.-a185-30 rating- 230vac make-abb , spare coil for contactor model no.-a110-30 rating- 230vac make-abb , spare coil for contactor model no.-ax150-30 rating- 230vac make-abb , spare coil for contactor model no.-a95-30 rating- 230vac make-abb , spare coil for contactor model no.-ax80-30 rating- 230vac make-abb

CTN :45560058

10 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of clamp meter , 5 gallon compressor oil tin , core for filter drier , filter drier core rpe48bd , relay base type rxze2m114 , relay 24v dc 4 co rxm4ab2bd , single core 40 mmsqlfh cable , ss washer 125 , screw driver set , ss 304 tubing , pilot tube fitting , filter drier replacement core , potentiometer shaft , relay , store room thermostat , piston set , valve plate set , pocket for temp switch , gasket , therm injection valve , defrost heater element tat 30 , shut off valve , shut off valve , shut off valve , temperature transmitter pt 10 , solenoid valve on oil return line , condensers of chilled water units ac , thermometer discharge line , thermometer cwinlet , flex metal hose , oil heater , therm injection valve , needle valve , gauge oil pressure , feeler pocked , stop valve , stop valve , power contactor 115 vac , air contactor , chilled water pump of air conditioning plant , fuse 500v , relay 24vdc , rc module , auto controller , antifreeze thermostat , fuse switch , fuse switch , sight glass set , current meter , pilot lamp , valve relief , metaflex coupling api 671

CTN :45624154

08 Jul, 2026 NA

Multi City - Andhra Pradesh

Tender For corrigendum : procurement of spares for 6kl and 10 kl transformer oil filtration machines- coarse filter pp coarse filter pp, cotton yarn on ss core.61 mm diax20 inch long (5 micron), 01 set equals to 18 nos. (for 10kl transformer oil filtration machine of nach make), fine filter pp cotton yarn on ss core.61 mm diax20 inch long (1 micron), 01 set equals to 18 nos. (for 10kl transformer oil filtration machine of nach make), coarse filter resin bonded cellulose/ 1 micron, catridge type, active length:500mm. (for 6kl transformer oil filtration machine)., fine filter max.filtration of particle size:0.5 micron, catridge type, active length:500mm. (for 6kl transformer oil filtration machine)., heater element type: indirect, 2.77 kw, 1ph,230 v ac, temperature range:30-110 deg.cen, (for 6 kl transformer oil filtration machine)., heater element type: indirect, 4 kw,1ph,230v ac temperature range:30-110 deg.cen, (for 10 kl transformer oil filtration machine)., vacuum pump oil, for 10000 lph transformer oil filtration machine, roots pump oil, dial type thermometer 0-150 deg c, oil inlet motor with pump pump make: del pd pumps and gears(p) ltd pump type: positive displacement with gear pump. model: hgn-150 size: 1 half inch bsp, 1440 rpm min capacity: 110 lpm max. pressure: 10kg/cm motor make and type: siemens, 3 ph., induction type rating: 415v, 5.1a, 3 hp (2.2 kw), 1430 rpm type of starter: dol min. suction head at rated output(meters): 3-5 mtrs frame: 100l, oil outlet motor with pump(6kl) flow well canned motor pump set pump make: cee dee/flowwell pump type: glandless centrifugal. capacity: 6000 lpm motor make and type: monoblock rating: 415v, 50 hz, 3 hp output: 2.2 kw type of starter: dol min. suction head at rated output(meters): 15 mtrs flow: 100 lpm type: cmp: 0.18.6, water pump capacity: 18lpm type: centrifugal make: cri/kirloskar/reputed, smps(6kl) i/p: 230 vac o/p: 24 vdc, 5a make: nhp, mx-o contactor(6kl) i/p: 240 vac, 2no+2nc type: 22e suitable for 55 deg.cen make: landt, oil inlet motor with pump(10kl) inlet gear pump: del pd pumps and gears (p) ltd model: hgn-250 size: 2 half inch bsp, 1440 rpm min. capacity: 350 lpm max. pressure: 10kg/cm motor make: crompton greaves limited rating: 5 hp, 415 vac, 50 hz, 1430 rpm, frame: nd112m, oil outlet motor with pump(10kl) make: nxl flow instruments rating: 3 ph. 415vac, 2850 rpm, 7.5/10 hp, 10000 lph, glandless pump: nxl model: 31100 s head: 15 mtrs discharge: 200 lpm size: 65 x 38 mm, solenoid valve: rating: 24v dc, 50nb, threaded end 0.00 to 4.00 bar 80 deg.cen model: 9230d504/cf8/s6/bn/bsp m50-rd/gp/h make: avcon, solenoid valve: rating: 230 vac / 8 w, 1 by 4 th inch nb, threaded type make: kushako, solenoid valve: rating: 230 vac,50 hz, 40nb operating pressure: 0 kg/cm 2 5 kg/cm 2 model: uw-40-1 bsp make: avcon/pro-unid, solenoid valve: rating: 230 vac,50 hz, 45nb operating pressure: 0.00 to 2.00 bar model: 9220a6015/br/s4/bn/bsp m45-1-rd/gp/h make: avcon/pro-unid, solenoid valve: rating: 230vac, 50hz model: m50 h make: avcon, solenoid valve: rating: 24vdc, 40 nb make: avcon

CTN :45736383

08 Jul, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of 3 pole 415 volt, 50 hz, 110 a contactor for 50 kvar apfc panel. coil voltage 110v, ac, 2no+2nc, equivalent to mnx110 of make lauritz knudsen. [ warranty period: 30 months after the date of delivery ] ]

CTN :45532091

04 Jul, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : supply of 2x1818 kva inverter mandatory spares - supply of 2x1818 kva inverter mandatory spares., emparro cap 20/48, mb cap 20/24 buffer modul, mcs-b 5-110-240/24v power supply, miru-01, ofaa000gg25 - 25nhg000b-690;25a, 690v, iec000, 2218f/2tdh4o, 2218f/2tdh4ou, fan control box assembly, mersen fuse ac 1250a 690v - old code (3a, memory unit kit zmu-02, spxv010, cbh 335 c h 414 5r0, film capacitor, fuse 5a gpv;1500v;gpv;10,3x85;33.2a mgnd fuse, rev.a;contactor; af1250-30-22-68; 1260a(, rev.c;pcb kit;mgnd-01;assembly;, rev.b;cbhk 335 c 413 100r kt -mgnd resis, contactor gigavac p115cda, 1500v, 50a -grounding

CTN :45581200

01 Jul, 2026 16.73 Lacs

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , plasticized pvc tapes with non-thermosetting adhesive for electrical purpose (v2) isi marked to is 7809 (part 3/ sec1) (q2) , non modular piano type domestic electrical switches isi marked to is 3854 (q2) , electrical plugs (v2) isi marked to is 1293 (q2) , led batten light (led tube light) (v2) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , water storage tank , plywood bwr , led tube , copper cable , wire mesh , hydraulic door closer , cable , plywood bwr , whb , led batten , power contactor , db mcb tpn , wire mesh , particle board , flat back urinals , ewc , cpvc sdr , curtain rod alu , cable pvc , looking mirror , isolator 4 pole100 amps , fan regulator , tower bolt alu , led mirror light , helical door spring , db mcb spn , bow handle , ply wood bwr , sheet aluminium , sliding door bolt , wire mesh pvc , butt hinges , m seal , led lamp , cpvc tank adaptor , screw wood , door stopper aluminum , door handle , cpvc female brass threaded , capacitor , metal clad ac box , modular socket 20 ampr , curtain rod brackets aluminum , switch socket combination , sliding door bolt alu 300 mm , tower bolt alu 100 mm , hasp and stapple alu , screw wood 50 x 8 g , butt hinges alu 75 mm , bracket ci for flat back urinal , butt hinges ms 50 mm , modular socket 10 amps , tower bolt alu 75 mm , teak wood beading , tower bolt alu 200 mm , mortice lock 6 levers left , bow handle alu 100 mm , fevicol , butt hinges alu 125 mm , cpvc brass elbow , screw wood 35 x 6 g , butt hinges ms 100 mm , modular switch 10 amps , cpvc brass reducer elbow , cpvc brass tee , call bell ding dong , cpvc adaptor , nails wire round 50 mm , nails wire round 75 mm , modular switch 20 amps , rubber washer , syphon washer pvc , modular plate 8 module , plug top 3 pin 15 amps , hasp and staple , modular plate 3 module , modular plate 12 module , angle holder , modular plate 6 module , cpvc adaptor 25mm female , screw wood , metal clad ac plug , lugs aluminium , screw wood 25 x 8 g , cpvc adaptor 25mm male , cpvc adaptor male 20 mm , cpvc female adaptor 20 mm , screw wood 40 x 8 g , switch bell push , lugs aluminium 240 sqmm , lugs aluminium 300 sqmm , plug dummy gi 20 mm , insulation tape20 mm , lugs aluminium 150 sqmm , lugs aluminium 120 sqmm , lugs aluminium 70 sqmm , lugs aluminium 95 sqmm , flexible conduict pipe 25 mm , lugs aluminium 50 sqmm , lugs aluminium 25 sqmm , lugs aluminium 35 sqmm , lugs aluminium 16 sqmm , xlpe cable water storage tank 1000 ltr cap, plywood bwr 8 ft x 4 ft x 12 mm per sheet 2.88 sqmtr , led tube for t8 fittings 20 watts aluminium body, water storage tank 500 ltr cap, plywood bwr 8 ft x 4 ft x 18 or 19 mm , led tube for t5 fittings 18 watt aluminium body, 3 core copper round cable 2.5 sqmm 100 mtrs coil, wire mesh aluminium 0.9 or 1 mtr x 15 mtr 0.45mm, ss plate rack trade patern size width 900 mmx length 750 x 250 mm , hydraulic door closer left and //bid details 2 / 122

Lifting Magnet Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector