Latest lifting hook Tenders | Government lifting hook Tenders

Central Government/Public Sector

CTN :45605298

18 Jul, 2026 NA

Chittaranjan - West Bengal

Tender For corrigendum : supply of high tensile transition cb coupler(top operated) with top lifting hook, top lifting assembly & link for top operation in fitted condition but without high capacity draft gear, striker block & suspension hook (for tr screw coupling)as per rdso drg no. sk.dl-4809 alt. 1 or latest item no. 1 to 8, 12 to 14, 35 to 40, 42 & 46 to 53. except item no.- 9 to 11, 15 to 34, 41, 43 to 45 for wag-9hc locomotive. as per drg.no. skdl-4809 alt.1 as per specn. rdso specn. no. 56-bd-07 m.a no.2 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45728231

09 Jul, 2026 NA

Jagadhri - Haryana

Tender For supply of snatch bottom block complete assembly as per specification below:1. 10 ton snatch block assembly consisting of pulleys with enclosed hook, crosshead, pin, and bearings suitable for 4 falls 2. snatch block design of the crane as per is: 3177-2020 and is: 807-2006 3. lifting hook is: 3815-1969 or latest is: 15560 4. the hook should be 20-ton proof load-tested, liquid penetration test, dimension report, chemical and mechanical report with inspection certificate from a government-approved test house (or) nabl-accredited laboratory shall be provided 5. hook type: c type [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45728148

06 Jul, 2026 NA

Puttur - Andhra Pradesh

Tender For supply of aluminium bus terminal connector-36mm bus/pad for 25kv isolater ri-6481 (body-01), 6482 (clamping piece-02), bimetallic strip-01, with fasteners: [m12x60/40 bolt, nut, f. washer, s. washer-08 set] as per rdso drg. no. eti/psi/p/6480 [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45736230

02 Jul, 2026 NA

Lumding - Assam

Tender For supply of tertiary station name board/ diagonal boards. boards shall be of high strength one piece 600mmx 600mm square shape powder coated in ral 9003 to minimum 50um thickness on both sides, with three point bending flexural test of the board collar greater than 7800n. primary collar of height 20mm with corners of r 45mm for prevention of accidental injury shall be stretch roll formed to 90 degree to sign face, without involving any cutting and welding and secondary collar of 20mm width, shall be bend inward to 90 degree to primary collar for installation purpose. this board shall be made of 2mm thick aluminum sheets, 2mm thick roll formed s.s clamping plate which shall be firmly rotatory riveted to secondary collar. approved test and graphics shall be eco friendly printed on retro reflective sheets astm d 4956 it madein three colors and three languages hindi, english and regional language and firmly pasted on sign face noinstallation hardware shall be visible from the sign face. this board shall not have any separate back frame for strengthening. all hardware items used shall be of ss304 grade, high tensile and anti theft nuts shall beused in all type of installation, all charges including gst and installations. make superior quality or similar. note- due to gm inspection in lmg materials are urgently required and installed within 7 days from the date of p.o [ warranty period: 30 months after the date of delivery ] ]

CTN :45730148

13 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply, installation and commissioning of aerosol based fire detection & suppression systemcartridges, one set consisting of cartridges (1)8/10 gm cartridge-01 piece in onboard panel (2) 100 gm cartridge piece in underslung panel of lhb non ac coaches as per technical parameters as per annexure g1 ofrdso specification no. rdso/pe/spec/ac/0192-2018 (rev.1) or latest. makes: which have been enlisted in the bill of material for fire suppression cartridge after 17.09.2021 to till tender opening date. these shall be installed in electrical panels of non-ac lhb coaches. all necessary modification, clamping arrangement including bracket pieces& accessories required for fixing & installation of these items shall be with the scope of supplier. total-02 nos. of cartridges required for one coach as one set. (one set consists of 02 cartridges of capacity 8/10gm 01 no., 100gm cartridge -01no.) note: location of aerosol fire cartridge in the electrical panels shall be as per drawing mentioned in rdso letter no. el/7.1.108/sbc main dt.07/01/2022. material supply as per latest temperature guideline as attached. [ warranty period: 30 months after the date of delivery ] ]

CTN :45728595

30 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For supply of lifting hook complete with castle nut ,key & distance washer for unimat plasser part no:-ud313.1304, make:- plasser or equivalent. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45520196

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45694285

06 Jul, 2026 80.98 Lacs

Umaria - Madhya Pradesh

Tender For procurement of critical spares of tg set for aoh of unit no. 3 and 4, at sgtps, mppgcl, birsinghpur. - hp shaft sealing front as per tender schedule, sealing ring, sealing ring, sealing ring, hp shaft sealing rear as per tender schedule, sealing ring, sealing ring, sealing ring, ip shaft sealing rear as per tender schedule, sealing ring, ip shaft sealing front as per tender schedule, sealing ring, lpc front shaft sealing as per tender schedule, sealing ring, sealing ring, lpc rear shaft sealing as per tender schedule, sealing ring, sealing ring, bearing yoke keys, fitted key for brg. no. 1 yoke bottom, fitted key for brg. no. 1 yoke side, fitted key for brg. no. 2 yoke bottom, fitted key for brg. no. 3 yoke bottom, fitted key for brg. no. 3 yoke side, fitted key for brg. no. 4/5 yoke bottom, fitted key for brg. no. 4/5 yoke side, radial and axial keys as per tender schedule, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key for hp rear bearing pedestal (radial-fr) as per tender schedule, fitted key for hp rear bearing pedestal (radial-fr) as per tender schedule, fitted key for hp rear bearing pedestal (axial) as per tender schedule, fitted key for hp rear bearing pedestal (axial) as per tender schedule, fitted key for hp rear bearing pedestal (radial-rr) as per tender schedule, fitted key for hp rear bearing pedestal (radial-rr) as per tender schedule, fitted key ( hp rear brg pedestals), fitted key for ip casing rear (axial) as per tender schedule, fitted key for ip casing rear (axial) as per tender schedule, fitted key for ip casing rear (radial) as per tender schedule, fitted key for ip casing rear (radial) as per tender schedule, fitted key l -196 (radial gusset block in condenser), key l-78, fitted key ip inlet insert as per tender schedule, fitted key ip inlet insert as per tender schedule, fitted key ip extraction connection, fitted key ip casing assembly, key ip casing assembly, fitted key (hp seal), fitted key for hp casing (radial), fitted key for hp casing (axial), brass sealing strip 8x2x845, brass sealing strip roll 8x2, stud m24 x 250 for ms/hrh strainer with hex nut & washer, coupling bolts m56 x270 for hp/ip, coupling bolt m64x335 for ip-lp, clamping piece for lp turbine, locking plate 7th stage for lp turbine, locking plate 8th stage for lp turbine, helical compression spring, fasteners, stud m52 x 220- 20 x185 modified, stud am64 x 305- 20x248, stud am 72x06x320 25x257, stud am 72x06x520 25x308, stud am 72x06x380 25x252, cap nut m52 for hp inner casing, cap nut pm 64, cap nut pm72 x 6, screw hex m 36x180, screw hex m 30x110, mop spares, bearing bush, bush, mop impeller ring dia 185, governor impeller ring dia 106, o ring, shaft check nut 30x1.5, sealing ring, .

Central Government/Public Sector

CTN :45681866

27 Jul, 2026 NA

Nagaur - Rajasthan

Tender For supply of regid bimetallic terminal connector suitable for 50 mm dia, alluminium tubular bus bar to terminal pad of 25 kv isolater/ct conforming to rdsos drg.no.re/33/p/11090 oras per drawing no. eti/psi/p/11090 or latest consisting of part no.11091 & 11092" complete with connector body and clamping piece. [ warranty period: 30 months after the date of delivery ] ]

Lifting Hook Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors