Latest lifting tools Tenders | Government lifting tools Tenders

CTN :45469583

16 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For providing of custom bid for services - ---- custom bid for services - revalidation of fall arrestor at hpcl kanpur terminal- annual maintenance and revalidation of fall protection system installed at tlf gantry (16 lines), calibration shed (1 line), sealing tower (4 lines), ethanol u/l gantry (2 lines) and tw gantry, spur 1 (14 sections of 50 mtr each and tw gantry, spur 2 (14 sections of 50 mtr each). i. conduct a thorough inspection of the existing fall arrestor system and lifeline. ii. assess the current condition of all components, including harnesses, lanyards, anchors, and connectors. iii. identify any wear, damage, or defects that could compromise safety. iv. ensure the system complies with the latest safety standards and regulations (e.g., osha, ansi). v. verify that all components meet manufacturer specifications and industry requirements. vi. perform load testing on the lifeline and anchor points to verify their strength and reliability. vii. conduct a drop test to ensure the fall arrestor system functions correctly. viii. provide certification of revalidation, including test results and compliance documentation. ix. carry out necessary maintenance, such as lubrication of moving parts and tightening of loose components. x. repair or replace any damaged or worn parts to restore the system to optimal working condition. xi. document all repairs and replacements made during the revalidation process. xii. recommend and implement any necessary upgrades to enhance the safety and performance of the system. xiii. install additional safety features if required, such as shock absorbers or retractable lifelines. xiv. prepare a detailed report of the revalidation process, including inspection findings, test results, and maintenance performed. xv. maintain records of all certifications and compliance documents for future reference. xvi. schedule follow-up inspections to ensure continued compliance and safety. xvii. offer ongoing technical support and assistance as needed. xviii. lifting tools & tackles: vendor should get revalidation certification through a up factory competent person and submit all required documents to hpcl.

Central Government/Public Sector

CTN :45446527

12 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For biennial load testing contract of all tp equipment (lifting tools tackles lifts) of rls chp

Central Government/Public Sector

CTN :45431599

11 Jun, 2026 NA

Rajkot - Gujarat

Tender For auction sale of depot ferrous scrap - old used and u/s mechanical track jack, ball bearing, pad lock, tap measuring, pipe wrench, weight, different offsize spanner such as ring spanner, box spanner, double ended spanner, center punch, chiesel, tube, nose plier, cut plier, offsize screw driver, hand hammer, offsize files, hand crimping tools, piston sleeve, draw vise, rail thermometer, bench vice, swivel jack, level spirit, single sleeve pully, offsize pully, torch, stop watch, chemphering m/c, hand drill m/c, chain saw, screw crimping tools, allen key set, wire guage, three one tester, etc (location b/w godown no. 1 & 2) delivery- by weight

State Government

CTN :45414723

10 Jun, 2026 1.34 Lacs

Multi City - Karnataka

Tender For testing inspection and certification of pressure vessels, lifting tools and tackles at supa power house

State Government

CTN :45378865

15 Jun, 2026 7.50 Lacs

Multi City - Karnataka

Tender For the brief scope of works inspection, testing and calibration of various equipments, tools and tackles for the year 2026-27 at bhadra generating station at bhadra generating station.for lifting tools & tackles yearly once.once in a every period of 06 months.a.for hydrostatic testing, inspection and certification of pressure vessels once in a period of 4 year.inspection & testing of lifting machines and tackles/cranes/lifts.

State Government

CTN :45350976

03 Jun, 2026 1.60 Lacs

Udaipur - Rajasthan

Tender For supply of workshop tool- engineering scriber, sleeve cutter, dedh center) , combination pliers length 210mm , vde plier length 160mm and 200mm , long nose plier length 165mm , side cutting plier length 165mm , side cutting plier with cable striper length 165mm , circlip pliers internal, external st., bent nose capacity 19-60mm , threading taped and dies complete tape and round die set in box 1/16, 3/32, 1/8, 5/32, 3/16, 7/32. %, bsw-7nos , 145/16 38 216,1585-5 , tap handle (1/4, 3/81%2 , line tester-length 130mm , socket set with handle with external (size-8-31) , octagonal chisel length 200mm cuting edge 22mm , octagonal chisel length 200mm cutting edge 25mm , center punch length 100 125, 150mm) , hackson frame , hand oil pump capacity 250 , grease gun lever type capacity 300cc, piston size 11/12 , outside caliper (150, 200mm) , inside caliper (150, 200) , spring divider 150, 200mm) , bench vise fived base 75m , adjustable spanner longth 305mm and 255mm , adjustable spanner with soll grip length 105mm and 255mm , oum boot , air hose pipe for comprever , tong , screw gauge , wire gauge , claw hammer , pipe wise , extension cord , air gun use in nut bolting , fire extinguisher

Central Government/Public Sector

CTN :45177877

03 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For corrigendum : biennial load testing contract of all tp equipments (lifting tools tackle,lifts) of rls chp

CTN :45340595

08 Jun, 2026 6.93 Lacs

Murshidabad - West Bengal

Tender For service contract for statutory load testing and certification of lifting tools tackles lifts hoists eot cranes and pressure vessels etc of various capacities at phi 2x 300mw ph ii 2 x500 mw and phiii 01x 660mw units at sgtpp wbpdcl

Central Government/Public Sector

CTN :45303710

08 Jun, 2026 NA

Aurangabad(Bh) - Bihar

Tender For load testing of all t&p equipments (lifting tools, tackles, elevators,

Central Government/Public Sector

CTN :45137990

27 May, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; tender for the job of obtaining consent to establish for hter scheme at rcf thal unit through nipl route; as per scope of work; a) safety violation by contractor employee at work place: 1) working without wearing safety helmet (per person), 2) working without wearing safety shoes (per person), 3) working without wearing safety goggle &/or hand gloves during handling of hazardous chemicals, acid/alkali etc. (per person), 4) working without wearing safety belt (double lanyard full body harness) for height jobs above 2 meters. (per person), 5) working without wearing face shield during cutting, welding, grinding activity and during maintenance work on process lines and equipment. (per person), 6) not using ppe, tools/tackles as mentioned in safety work permit (per person), 7) working without valid test certificate for lifting tools/tackles (per incidence observation), 8) working without appropriate electric plug-pin, elcb/rccb/rcbo (per incidence observation), 9) working without a valid safety work permit (per incidence/ observation), 10) permit not available at site (per incidence/observation), 11) gas cylinder without flash back arrestor (per incidence observation), 12) gas cutting set with damaged hose pressure gauge without valve key (per incidence/observation), 13) gas cylinder without trolley (filled and empty) (per incidence/ observation), 14) unauthorized personal entering into cordon off area (per incidence/observation), 15) faulty wire/cable laying on ground or using snapped cables (per incidence/observation)., 16) improper hand tool or power tools (per incidence observation), 17) smoking at work place area. (per person), 18) found in intoxicated state (per person), 19) violation of road rules (per incidence observation), 20) b) safety violations by transport contractors, 21) faulty hazchem displayed on tanker (per incidence observation), 22) one pvc/tychem suit set if available (per incidence/ observation), 23) both pvc/tychem suit set are not available (per incidence observation), 24) fire extinguisher without hydro test. (per incidence/ observation), 25) trem card not available (per incidence/observation), 26) hazardous chemicals transportation training of driver by authorized agencies. (training card not available with driver) (per person), 27) lying/resting below the vehicle(per incidence/observation), 28) any other deviation found as per checklist for tankers (per incidence/ observation.

Lifting Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors