Latest lifting tools Tenders | Government lifting tools Tenders

Central Government / Public Sector

CTN :45717261

13 Jul, 2026 NA

Jamnagar - Gujarat

Tender For providing of custom bid for services - statutory testing, inspection and certification of rim seal fire protection system foam modules, hot/eot cranes, and lifting tools & tackles at wrpl, vadinar, by a competent person approved by the chief inspector of factorie..

CTN :45739867

22 Jul, 2026 NA

Guna - Madhya Pradesh

Tender For providing of custom bid for services - group i statutory inspection of process pipelines, pressure vessels equipment and lifting tools & tackles as per factories act 1948 & mp factories rules 1962 at lpg plant of gail india limited vijaipur for a period of two y..,custom bid for services - group i statutory inspection of process pipelines, pressure vessels equipment and lifting tools & tackles as per factories act 1948 & mp factories rules 1962 at lpg plant of gail india limited vijaipur for a period of two y..,custom bid for services - group ii statutory inspection of process pipelines, pressure vessels equipment and lifting tools & tackles as per factories act 1948 & mp factories rules 1962 at c2c3 plant hvj compressor station and f&s dept of gail india ..,custom bid for services - group ii statutory inspection of process pipelines, pressure vessels equipment and lifting tools & tackles as per factories act 1948 & mp factories rules 1962 at c2c3 plant hvj compressor station and f&s dept of gail india ..

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

CTN :45686658

02 Jul, 2026 3.47 Lacs

Mananthodi - Kerala

Tender For annual maintenance of gas crematorium equipment at mananthavadi municipality wayanad district proposed under 2025-26 annual plan. project no-1068 - civil work, od319315/2025-2026supply, replacement and servicing of automatic burner and fitting gas line., od319328/2025-2026cleaning of chimney surface, machinery repairing, removal of soot and rust, and applying primer with two coats of epoxy paint., od319385/2025-2026repairing damaged brickwork by removing broken bricks and replacing them with new bricks using cement mortar. the work also covers proper alignment,joint finishing, curing, and cleaning of the repaired area, complete as per direction of engineer-in-charge, od319413/2025-2026servicing and maintenance of the motor electrical system, such as inspection of wiring, terminals, switches and connections. it also covers tightening of loose connections, minor repairs, testiong for proper operation, and ensuring safe and smooth functioning of the motor., od319470/2025-2026reparing damaged or worn-out bed with 18 mm ss rod structures by alignment correction, replacement of defective parts if required, welding or fastening works, and ensuring proper strength and stability., od319499/2025-2026repairing of the gas valve system, such as cleaning , replacement of worn-out seals orcomponents if required, leak testing, and ensuring smooth and safe operation. the work shall be carried out as per safety norms., od319520/2025-2026removal of rust, scale, and old loose paint from equipment surface by wire brushing /scrapng, surface cleaning, application of suitable anti-corrosive primer, and finishing with two coats of approved paint. the work includes all materials, labour, tools and incidental charges required to complete., od319580/2025-2026comprehensive maintenance of the installed equipment for a period of one year, covering routine inspections,servicing, minor repairs,adjustments and ensuring continuous and safe operation. including survice of burner, blower, impeller and chimney. the rate includes labour, tools and incidental charges during the maintenanace period, excluding major replacements unless specified.

State Government

CTN :45669079

08 Jul, 2026 7.24 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45669080

08 Jul, 2026 5.38 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45675246

07 Jul, 2026 5.87 Lacs

Amreli - Gujarat

Tender For installation of various instruments at raidy & dhataravdi-1 irrigation scheme - item no.1:- providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss- 304/ss-316 plate with thickness of 3-5 mm, and be suitable for measurement ranges of approximately 0-50 l/s depending on notch angle. the weir shall have ±1% fullscale reading accuracy, operate under 5-100% humidity, temperature -20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , item no.2:- providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge. , item no.3:- providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks, centering, scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. (c ) concrete grade 1:2:4 and msa-40 mm(graded)

Central Government/Public Sector

CTN :45178202

30 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology -transport frame , engine mounting stand , support tool , det 2 of tm2820g101 , balancing tool , blank , balancing inspection tool , measuring tool , measuring tool , dimension measuring tool , measuring tool , measuring tool g25-1 , measuring tool , dimension measuring tool , dimension measuring tool , measuring tool , measuring tool t33-1 , equipped metal container , set of blanks , lifting tool , assembly support , spanner , obus de guidage , spanner & immobilizer , orientation tool , setting / removal tool , flipping tool , assembly / dis-assembly tool , removal tool , removal tool , extractor , extractor turbine hp , dis - assembly tool , tool for removal of front drive gen , marking support , marking support , marking support , protector , protector , o-ring installation tool , outer duct bearing removal tool , generator transport buildup , installation & removal tool , air entry blank , sealing & connecting tool , blank , air entry blank , harness sheath , orientation tool , handling tool , blank for exhaust pipe , de-blading set , removal tool , o ring installation tool , shell for seal assy , shell for seal assy , axial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , sealing check fixture , flow check tool , blank , relation tool , ring removal tool , wrench and immobilizer , wrench and immobilizer , measuring tool , extractor , extractor , extractor , name plate , fitting / removal tool , puller , extractor , blank , handling tool , extractor thp , bonding tool , centre blank , centre blank , handling tool , extractor , install/removal tool , dis-assy tool , measuring tool , static portion support

CTN :44380417

24 Jun, 2026 NA

Panchkula - Haryana

Tender For bid to ras bid to ras supply of cranes with slings and other lifting tools as per requirements: pick and move type crane with minimu , cranes with slings and other lifting tools as per requirements: crane with minimum capacity of 200 t , jcb for area clearance , jcb with hammer , open body truck trailer for 200 ton , heavy duty tractor with trolley with hook pin and eye type coupling (06 tonnes weight carrying capac , unskilled labour , cranes with slings and other lifting tools pick and move type crane with minimu , cranes with slings and other lifting tools as per requirements: crane with minimum capacity of 200

Central Government/Public Sector

CTN :45608034

09 Jul, 2026 NA

Raigad - Maharashtra

Tender For tender for ultra sonic thickness tests, hydraulic test and certification of pressure vessels, various size pipelines and load testing of lifting tools and tackles/lift as per statuary requirement in prescribed form no 11/12/13/13c.

Lifting Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector