Latest loading arm Tenders | Government loading arm Tenders

CTN :45112925

11 Jun, 2026 NA

Shimla - Himachal Pradesh

Tender For bid to ras tender for supply of disconnecting ht and lt supply taking down the defective transformer indoor outdoor type from four pole two pole structure or lifting from the outdoor type foundation or taking out from sub station bldg using a crane of suitable capacity and slings ropes etc as required and shifting the same to civil workshop for repairs complete all as directed for transformer capacity 400 kva , shifting back the repaired transformer indoor outdoor type from civil workshop to site reinstalling at original position and fixing properly on four pole two pole structure or outdoor type foundation or inside a sub station bldg using a crane of suitable capacity and slings ropes etc as required making ht lt side connections and testing for satisfactorily working complete all as directed for transformer of capacity 400 kva , draining out transformer oil from the transformer and storing the same in suitable containers to be arranged by contractor without any extra cost opening the top cover and lifting up the core assembly carefully to check the condition of transformer windings and core retanking the same after repairing checking of leakage from transformer body and repairing welding works required for making transformer body leak proof refilling the transformer oil dully dehydrated and filtered dehydration and filteration to be paid separately and making all connections with ht lt side bushings refixing the top cover and testing the transformer with a suitable capacity insulation tester complete all as directed for transformer of cap 400 kva , m and l for rewinding of burnt out defective ht copper coils with new super enamelled heavy duty copper winding wires of size matching to the existing one including varnishing drying in a suitable oven and all insulating material such as cotton sleeves tapes etc and connections with bushing terminals complete all as specified and directed , all as per item no 4 above but lt copper coils complete all as specified and directed , m and l for painting the transformer tank from inside with two coats of zinc chromite after preparing the tank walls bottom top cover inner side by properly cleaning the surfaces oil free complete all as directed for transformer capacity 400 kva , m and l for replacement of defective ht porcelain bushing of suitable size for transformer of cap 400 kva including washers of good quality complete all as specified and directed , m and l for replacement of defective lt porcelain bushing of suitable size for transformer of cap 400 kva including washers of good quality complete all as specified and directed , dehydration and filteration of transformer oil for indoor outdoor type transformers of any capacity at site using transformer oil filteration plant to improve di electric strength not less than 45 kv at 2 point 5 mm electrode gap complete all as directed note unit rate quoted shall be deemed to include the charges for hiring of oil filteration plant shifting to different locations at cantt area testing of samples of oil as per requirement and nothing extra will be paid on this account , s and f new transformer oil for replacement or topping up the level of oil having dielectric strength not less than 45 complete all as specified and directed

CTN :45154800

09 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras supply of air comp d cyl 200 ltrs tank 3hp 3ph motor with nrv a cut air inflator comp set , ark welding set 200 amp with 20 mtr cable and holder complete , air gun with spring type pipe , air impect gun heavy duty , alien key 03 mm 10 mm , bench vice heavy duty , battery charger c 12 72 , battery load tester , boost cable , centre punch 6 inch , circlip plier inner heavy duty , circlip plier outer heavy duty , cold flat chisel 6 , combination plier , complete mechanic tool box steel three fold with tools , copper welding cable , crash helmat , dah with handle , de spanner set 06 pic 8x9 to 18x19 , de spanner set 12 pic 8x9 to 30x22 , diesel spray gun , digital multimeter , drill bit set , electronic welding screen , eletrode holder , envil 100 kg , file flat bustard with handle 12 , fire extinguisher half kg , first aid box , foot pump electric , gear box trolly jack , goggles for motor cycle , grease gun bucket 20 kg air operated pneumatic , hammer ball pen 2 lbs with handle , hand drill machine , hand gloves leather , hand grinder , hexa frame , hub puller heavy vehicle , hydraulic jack 5 ton , hydrolic trolly jack 03 ton , hydrolic trolly jack 10 ton , hydrometer , hydrualic press hand oprated small , impact screw driver , inspection lamp with 5 mtrs wire and clip , iron trey 24 inch x 18 inch x 3inch with handle , iron trey 36 inch x 24 inch x 3 inch with handle , mechanic trolly creeper , oil cane 250ml , oil filter openner multy purpose , pad lock with key , paint spray gun , pick axe 4 5 lbs , pipe wrench 16 inch , plier adjustable , plug spanner mpfi , piston ring compressor , screw driver 10 inch , screw driver 6 inch , screw driver philips 6 inch , shawel , socket spanner 6mm to 14mm with complete ) /bid number : gem/2026/b/7526987 * /dated: 11-05-2026 & & / bid document 1 / 104 shawel , socket spanner 6mm to 14mm with complete attechment , socket spanner hexagonal 8mm to 32mm , soldring iron 125w heavy duty , soldring paste 50 grm pack , soldring wire 08 mm 50gm pack , spanner adjustable 8 , tool box steel two fold , torque wrench 250 lbs , torque wrench 3 mkg to 7 mkg , tubeless tyre puncture kit , tyre pressure gauge , tyre inflating hose , tyre lever heavy duty taparia , vaccum cleaner big size nt 70 2 , valve die , water thermameter digital , welding hand safety gloves leather , alien key 17mm , adjustable wrench 300 mm , cold flat chisel 19 mm , cold flat chisel 17mm , file square with handle 6 , file flat bustard with handle 6 , file flat round smooth handle 6 , file flat bustard with handle 10 , fire extinguisher 2 kg , fuel funnel small , fuel funnel big , filler gauge , grinder stone 4 , hand grinder elerical , measurement 200 ml , measurement 250 ml , measurement 500 ml , measurement 1 ltr , measurement 2 ltr , measurement 5 ltr , nose plier 6 , pipe wrench 10 inch , piston ring compressor big , piston ring compressor small , piston ring expender heavy veh , piston ring expender light veh , rottery pump , ring spanner 6x7 to 30x32 , screw driver 8 inch , screw driver 4 inch , screw driver philips 8 inch , screw driver philips 4 inch , screw driver combination kit , scissor 8 , steel foot rule 12 , spark plug spanner 21 no , tong 16 inch sandasi , tool box steel three fold , trolly for carring engine assy jib crane hv vehicle , tyre inflator machine heavy vehicle with accessories , tyre inflating hose with nozzle air comp d cyl 200 ltrs tank 3hp 3ph motor with nrv a cut air inflator comp set, ark welding set 200 amp with 20 mtr cable and holder complete, air gun with spring type pipe, air impect gun heavy duty, alien key 03 mm 10 mm, bench vice heavy duty , battery charger c 12 72, battery load tester , boost cable , centre punch 6 inch, circlip plier inner heavy duty, circlip plier outer heavy duty, cold flat chisel 6, combination plier , complete mechanic tool box steel three fold with tools, copper welding cable , crash helmat, dah with handle, de spanner set 06 pic 8x9 to 18x19, de sp

Central Government/Public Sector

CTN :45242888

15 Jun, 2026 50.00 Lacs

Kamrup - Assam

Tender For corrigendum : repair/maintenance of internal electric wiring, submain, mcb, dbs, eot crane, lift and connected works under ge narangi

Central Government/Public Sector

CTN :45430510

18 Jun, 2026 NA

Multi City - Multi State

Tender For spn/b957-500-ll-mr-4090/181 loading arms (rail/road) for bina petchem and refinery expansion project (bprep) of m/s bharat petroleum corporation limited (bpcl)

Central Government/Public Sector

CTN :45458974

17 Jun, 2026 NA

Multi City - Punjab

Tender For auction sale of depot miscellaneous scrap - scrap & condemned one diesel fork lifter of make m/s. godrej & boyce /mumbai, l. no.15, cap.3 mt, without battery & tyres, year 2015 , condemnded & dismantled three diesel platform truck cap.3 mt (l. no. misc.383 (year 2011), misc.391 ( year 2013), misc.393 ( year 2014) of make m/s perfect engg. co. bahadurgarh. one platform truck is without engine and battery but with tyres. two diesel platform truck are lying with engine and without tyres and battery. worn-out, dismantle condition complete or incomplete with or without non-ferrous & other attachments, as it is will be delivered as lot. unserviceable & unrepairable. location: - lying in e-7 behind electric shop. remarks: - (1) cutting allowed for loading purpose. (2) loading by purchaser. (3) private road crane allowed for loading purpose if required.

CTN :45438916

25 Jun, 2026 8.50 Lacs

Siang - Arunachal Pradesh

Tender For supply of engine crane portable , portable hydraulic jack 1ton 3 ton 5 ton , pipe wrench 14 inch and 6 inch , electric hand grinder 8 inch , trey square 24 inch , battery charger heavy duty 72v 15 amp with leads and crocodile clip with stand , digital multi meter with ac and dc amp tester , pneumatic automatic tyre removing fitting machine for light vehicle , car washer double cyl with complete accessories , shocker coil spring puller , battery charger , torque wrench 250 lbs , jack 03 ton , oil filter wrench , hex saw frame , goti set big , hammer 8 kg , grinder machine , drill machine , bench vice , air compressor , car washing machine , welding machine , hydrometer , anvil 100 kg , grease gun 10 kg , moon timing light , wheel hub puller tata 1212 , wheel hub puller tata 407 , oil puller , oil filter puller mg , oil filter opener tata 1212 , fuel filter opener tata , transmission oil fill up gun , piston ring compressor , piston ring expender , compressor gauge , injector testing , plug spanner , pressure jack 10 ton , oil filter opener tata 407 , fuel filter opener tata 407 , hand cutting machine , jack with handle , jack with rod 5xton , adjustable , valve die , tyre lever , file flat , fire extinguisher , tyre pressure gauge , cutting plier , tools box steel , inspection lamp , de spanner 8x10 , de spanner 8x9 , de spanner 10x11 , de spanner 12x13 , de spanner 14x15 , de spanner 16x17 , de spanner 18x19 , pick axe 4 point 5 lbs , shovel belcha , grease gun hand operated type , tyre lever heavy duty , cutting plier insulated type 8 inch , spanner de set 12 pcs 8x9 to 30x32 , screw driver 10 inch , hammer ball pin with handle 2 lbs , file flat bastard with handle 12 inch , mechanical jack with operating lever handle heavy duty 10xton capacity , wheel spanner , inspection lamp with 05 mtr wire and crocodile dial clip , pad lock with duplicate key , cold flat chisel 6 inch , screw driver philips type 6 inch , tyre inflating hose air line , first aid box , cold patch adhesiveness tube , tool box steel , plug spanner de set 08 pcs 8x9 to 21x23 , mechanical jack with operating lever handle heavy duty 5xton capacity , file flat bastard with handle 10 inch , spanner adjustable 8 inch , screw driver 6 inch , dah with handle , inspection lamp with 05 mtr wire and crocodile clip , screw driver philip star type had 6 inch , fire exitinguisher , plug spanner petrol vehicle , spanner de set 06 pcs 8x9 to 18x19 , foot pump with nozzle 2 inch dia of cyl , mechanical jack with operating lever , screw driver philips star type had 6 inch , tube less tube kit , screw driver 6 inch , spanner de 6x7 to 16x17 mm 6pcs , plier adjustable 8 inch , crash helmet , leather jacket , goggles , hand gloves leather , dak box side , canvas tool bag 12x14

Central Government/Public Sector

CTN :45432968

25 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of electric overhead travel crane

Central Government/Public Sector

CTN :45436658

22 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For design, manufacture, supply, erection, testing and commissioning of electric over head travelling crane of 3 ton capacity with pendant control and dsl length of 37 mts, including all spares and accessories as per the enclosed detailed technical specification. [ warranty period: 30 months after the date of delivery] ]

Central Government/Public Sector

CTN :45431066

11 Jun, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot miscellaneous scrap - 98415918 scrap firewood consisting of all types of dead trees, broken packing wooden boxes, broken furniture, broken wooden cable drums, electric board, bottoms, wooden table and chairs of shorts and sizes with or without attachment of minor ferrous items. note: -(1) cutting allowed on delivery time. (2) private crane allowed for easy loading.

CTN :45415617

08 Jun, 2026 40.00 Lacs

Anantnag - Jammu And Kashmir

Tender For rate contract for supply of materials and execution of various maintenance works, as and when required during emergency in electric division anantnag kpdcl for the fy year 2026-27 - supply, erection, testing & commissioning of s.t pole 11mtr. long sp-56 with base plate & cap for ht. strictly as per rec standards, erection, testing & commissioning of s.t pole 11mtr. long sp-56 including its carriage from divisisonal store to site, supply, erection, testing & commissioning of s.t pole 9mtr long sp-33 with base plate & cap for ht. strictly as per rec standards, erection, testing & commissioning of s.t pole 9mtr long sp-33 including its carriage from divisisonal store to site, supply, erection, testing & commissioning of s.t pole 8mtr long sp-15 with base plate & cap for lt. strictly as per rec standards, erection, testing & commissioning of s.t pole 8mtr long sp-15 including its carriage from divisisonal store to site, providing of hydraulic crane on hire basis for loading/unloading of dts of different capacities inclouding fuel and operator faling in the juridection of ed anantnag, erection, testing & commissioning of pcc pole 8mtr long including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 100mmsq (dog) conductor, laying, stringing, tensioning & binding of acsr 100mmsq (dog) conductor including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 50mmsq (rabbit) conductor, laying, stringing, tensioning & binding of acsr 50mmsq (rabbit) conductor including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 30mmsq (weasal) conductor, laying, stringing, tensioning & binding of acsr 30mmsq (weasal) conductor including its carriage from divisisonal store to site, providing & fixing of ismc 100x50x6mm channel iron cross arms for x-mer frame 9long @ 25.2 kg each -1 no including nuts & bolts, fixing of ismc 100x50x6mm channel iron cross arms for x-mer frame 9long @ 18.63 kg each -1 no including nuts & bolts, providing & fixing of ismc 75x40x6mm channel iron cross arms for x-mer frame- 1 nos @18.63 kg each 9 long including nuts & bolts, fixing of ismc 75x40x6mm channel iron cross arms for x-mer frame-, providing ,fixing, of ismc 75x40x6mm x-arm 5 long, fixing, of ismc 75x40x6mm x-arm 5 long-, providing ,fixing, of ms angle iron braces 50x50x6mm-4.5 ft long,, fixing, of ms angle iron braces 50x50x6mm-4.5 ft long, providing and fixing of sprial earthing made of 115 turns of gi wire swg no.8 placed 1.5m below ground level including excavation of pit, refilling the same withsoft soil, fixing of sprial earthing made of 115 turns of gi wire swg no.8 placed 1.5m below ground level including excavation of pit, refilling the same withsoft soil, supply,fixing, testing & commissioning of 11kv link set (polymer) station type as per is standards, fixing, testing & commissioning of 11kv link set station type (polymer/porcelain )as per is standards, supply,fixing, testing & commissioning of 11kv link set heavy duty as per is standards, fixing, testing & commissioning of 11kv link set heavy duty (polymer/porcelain ) as per is standards, supply,fixing, testing & commissioning of 11kv do fuse set (polymer )as per is standards, fixing, testing & commissioning of 11kv do fuse set (polymer/porcelain ) as per is standards, supply,fixing, testing & commissioning of 11kv la set (polymer )as per is standards, fixing, testing & commissioning of 11kv la set (polymer/porcelain ) as per is standards, providing and fixing of lt fuse set as approved by kpdcl., supply,fixing, testing & commissioning of 11kv disc set (polymer) 45 kn complete set, supply,fixing, testing & commissioning of 11kv disc set (porcelain) 45 kn complete set, fixing, testing & commissioning of 11kv disc set (polymer/po

Loading Arm Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector