Latest locking screw Tenders | Government locking screw Tenders

State Government

CTN :41535673

09 Sep, 2025 NA

Bhubaneswar - Odisha

Tender For e- tenders are invited on behalf of the director, national institute of science education and research, jatni from the manufacturers(indian or foreign) or their authorised reseller/indian agent only for supply & installation of the following item--, unmounted linear polarizer, , description of item -, , wavelength range: 600-1100 nm, , extinction ratio bands: >1000:1 for 695-1100, , nm, , parallelism: <0.5 arcmin, , diameter: 25.4 mm (ø1"), , n-bk7 broadband precision window, , description of item -, , size: 25.4 mm (ø1"), , size tolerance: +0.0/-0.2 mm, , thickness: 1.0 mm, , thickness tolerance: ±0.1 mm, , clear aperture: >90% of diameter, , surface quality: 20-10 scratch dig, , ar coating range: 650-1050 nm, , parallelism: ≤1 arcmin, , reflectance over ar coating range: ravg< 0.5%, , damage threshold: 7.5 j/cm^2 at 810 nm, 10 ns, 10 hz, ø0.144 mm, , n-bk7 broadband precision window, , description of item -, , size: 50.8 mm (ø2"), , size tolerance: +0.0/-0.2 mm, , thickness: 12.0 mm, , thickness tolerance: ±0.3 mm, , clear aperture: 2045.72 mm, , surface flatness: ≤2/10 over ca, , surface quality: 20-10 scratch dig, , ar coating range: 650-1050 nm, , parallelism: ≤5 arcsec, , reflectance over ar coating range: ravg< 0.5%, , damage threshold: 7.5 j/cm^2 at 810 nm, 10 ns, 10 hz, 00.144 mm, , mid-infrared enhanced gold mirror, , description of item:-, , diameter: 7.0 mm, , diameter tolerance: +0.0 mm/-0.1 mm, , thickness: 2.0 mm (0.08"), , thickness tolerance: ±0.2 mm, , reflectance: rang> 98%, rats 95% from 2 µm to, , clear aperture: >06.3 mm, , 20 µm @ 0° to 45° αοι, , front surface flatness (peak to valley): <2/10 @ 633 nm, , substrate: fused silica, , surface quality: 40-20 scratch-dig, , parallelism:<3 arcmin, , 0.1 j/cm2 at 1.064 µm, 10 ns, 10 hz, ø1.06 mm 3 j/cm2 at 10.6 µm, 100 ns, 1 hz, ø1.29 mm, , damage threshold (pulsed):, , low-gdd ultrafast mirror, , description of item: -, , design wavelength range: 700-930 nm, , diameter: 38.1mm (ø1.5"), , diameter tolerance: +0.00/-0.10 mm, , clear aperture: >80% of diameter, , thickness: 12.0mm, , reflectance: r> 99% (700-930 nm); r> 99%, , thickness tolerance: ±0.20 mm, , (730-870 nm), , group delay dispersion:, , gdd < 30 fs² (700-930 nm), , angle of incidence: 45°, , gdd < 30 fs² (730-870 nm), , substrate: fused silica, , front surface flatness: 2/4, , front surface quality: 15-5 scratch-dig, , parallelism: ≤3 arcmin, , back surface: polished, , kinematic rotation mount, , description of item:-, , for mounting ø1" optics, , three 1/4"-80 lockable stainless-steel adjusters with removable knobs and brass bushings for, , smooth adjustments, , six #8 (m4) counterbored mounting holes al-, , low left-handed or right-handed orientations sm1-threaded (1.035-40) rotation ring with locking screw

CTN :41542530

01 Sep, 2025 NA

Delhi - Delhi

Tender For supply of swivel lock anchors assorted sizes , shoulder hemiarthroplasty set complete , bio rc ha screw assorted size , proximal tibial posteromedial locking plate 4 6 holes complete construct tt with compatible screws assorted size lt rt , lcp for proximal lateral tibia 11 13holes right left with 5 locking and 3 cortical screw tt , pfna ii proximal femoral nail 9 point 0 mm long right 130 length 300 mm titanium alloy tan sterile 01 prox blade 1 end cap and 2 locking bolt , acl flexible loop femoral tunnel assorted size , repid evaporation cooling system kit bandage a 10cm into 2m for wrist elbowm ankle injuries reusable , repid evaporation cooling system kit bandage b 12cm into 3m for tkr thr acl and pcl surgery reusable , coolant 250 500 mi enthanol based evaporating agent required to reacharge the reusable bandages , tennis elbow support , thumb spica , larginine usp 500mg , 300 ml canister with gel should be 5 lumen tubing for active or vac ulta unit , 500 ml canister with gel should be 5 lumen tubing for vac ulta unit , glucosamine rose hip extract vit d tab , collagen peptide type 1 40mg sodium hyaluronate 30 mg, chodroitine sulfate 200mg, vitamin c 35 mg tab , larginine usp 1000mg lysine monodrail zinc , elemental calcium 250mg vitamin d3 ip 100 iu tab , llysine monohydrate usp 200mg suflhote vitamin b6 , trypsin 48 mg plus bromeline 90 mg plus rutoside 100 mg enteric coated , lcp distal radius plate tt rt lt with 4 cortical 4 locking screw assorted size with complete set , fast fix straight curved , 1000 ml canister with gel should be 5 lumen tubing for vac ulta unit ) /bid number : gem/2025/b/6494629 * /dated: 22-08-2025 & & / bid document 1 / 23

CTN :41011908

26 Aug, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of distal radius external fixator system with distractor compression unit 02 x 3pt5 mm and 02 x 2mm schanz screws , minifragment plate 2pt7 mm with 6 screws titanium , distal radius external fixator with adjustable ball and socket hinge , flexible intramedullary reamer 7 mm , interlocking humeral nail cannulated for humerus complete construct with 04 interlocking bolts and 01 end cappt titanium , antegrade femoral nail system complete construct right or left with 04 locking bolts and 01 end cap titanium , distal radius locking plate variable angle complete construct with 6 locking and 3 cortical screws titanium , distal radius lcp t plate 3pt5mm complete construct with 3 locking and 3 cortical screws titanium , clavicular anatomical plate 3pt5 complete construct lt rt side 6 cortical screws titanium , distal end clavicular plate rt lt low profile 4 locking 4 cortical screws complete construct ti , proximal humerus anatomical locking plate complete construct6 locking 4 cortical screwsti , distal humerus anatomical medial plate 3pt5 lt rt complete construct 6 locking 4 cortical screws ti , distal humerus anatomical posterolateral plate 3pt5lt rt complete construct 6 locking 4 cortical screws ti , olecranon plate anatomical 3pt5 lt rt complete construct 6 locking 4 cortical screws ti , locking reconstruction plate 3pt5 ti 14 hole twelve 3pt5 locking head ti screws , meniscal cinch for all inside meniscal repair , all inside meniscal repair implant systempt , clear trac cannula 5 mm to 10 mm various sizes , cling drape film roll sterile transparentpt , fibre suture 2 mm for acl graft preperation , polybutylate coated braided polyester orthosuture 5 1or2 circle taper cut 45 single needle ethibond sterile foil single thread box 10 12 , iodinated adhesive incise drape different sizes large , tibial nail with multiple proximal interlocking options tip locking 6 x locking bolts 01 end cap ti , trochanteric hook plate , ti distal fibula locking plate 6or7 hole rt 3pt5 combihole 5 2pt4 or2pt7 coxial holes in distal end 02 cortical 06 locking screws

Central Government/Public Sector

CTN :41531423

12 Sep, 2025 NA

Mumbai - Maharashtra

Tender For supply of titanium calcaneal plate (locking )set of 1 plate + 6 locking screws - imported, interchangeable size

Central Government/Public Sector

CTN :41531528

10 Sep, 2025 NA

Mumbai - Maharashtra

Tender For supply of reverse shoulder replacement set 1.reverse shoulder glenoid base plate*1,2.reverse shoulder humeral tray *1.3.primary stem un cemented- standard size *1,4.versa dial/standard taper *1,5.reversr shoulder standard metaglene *1,6.reverse control screw *1,7.arcom xl standard humeral bridge *1,8.fixed non locking screw *1,9.fixed locking screw *2, 10.company to provide all set of implants and instruments at the time of surgery,12

CTN :41445593

25 Aug, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of bur round cross cut tungsten carbide for straight hand piece size 1.6mm , blasting material aluminium oxide grain size- 150micron pkt of 01 kg , self cure tooth coloured resin shade a2 bottle of 55 gm , self cure tooth coloured resin shade a3 bottle of 55 gm , self cure tooth coloured resin shade a3.5 bottle of 55 gm , bur, round tungsten carbide for fg 1.0 mm, pkt of 3 , bioplast sheet, 1.0 mm , bioplast sheet, 1.5 mm , bioplast sheet, 2.0 mm , crown and bridge metal np alloy for box of 1 kg , crown and bridge spacer die 20-30 ml bottle with thinner , crown and bridge wetting agent bottle of 01 litre , diamond bur 1.0 , diamond bur 0.4 , sintered diamond 2.5 bur , sintered diamond 1.0 bur , sintered diamond 0.6 bur , diamond bur 1.8 , diamond bur 1.4 , dust collecting bag , sintered diamond burs for grinding metal for shp assorted set with minimum 10 component enlisted as pvms 10032001-10032010 , cobalt chromium metal , investment for cobalt cromium , crown and bridge ceramic for 3d printer resin , denture resin for 3d printer , crown and bridge permanent resin for 3d printer , all-purpose glaze resin for 3d printed c and b and denture , adhesive resin for 3d printer complete denture , cold mould seal ) /bid number : gem/2025/b/6574894 * /dated: 14-08-2025 & & / bid document 1 / 24

CTN :40673812

23 Aug, 2025 NA

Ernakulam - Kerala

Tender For bid to ras bid to ras bid to ras corrigendum : tender for supply of spacer bush , oil orifice , oil orifice , oil flow switch , suction gas filter , oil filter , screwed socket , sealing plug , sealing screw , clamping plate , gasket back cover , 0 ring , hexagon head screw , hexagon head screw , self locking screw with serrated bearing surface , cheese head screw , cheese head screw , cheese head screw , cheese head screw , grooved nut , grooved nut , retainning ring , retainning ring , spring washer , spring washer , sealing lip , parallel pin , round head grooved pin , key , cylindricall roller bearing(male)

CTN :40540139

30 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of regulator flange , sealing plug , sealing screw , o ring , hexagon head screw , hexagon head screw , self locking screw with serrated bearing surface , cheese head screw , cheese head screw , cheese head screw , cheese head screw , cheese head screw , cheese head screw , head socket cheese head screw , gasket ring , main rotor , secondary rotor , spacer bush , piston complete , thrust spring , coil , valve complete , oil side glass , screwed socket , socket screw , grooved nut , grooved nut , dowed pin , ptc sensor , suction gas filter , check valve , piston ring , lip seal

CTN :41193746

25 Aug, 2025 15.00 Lacs

Bhiwadi - Rajasthan

Tender For corrigendum : hiring of ot implants in government hospital bhiwadi - general items for ortho ot, femur interlocking nail diameter 9 to 12 mm and length 36-44cm (1cm difference) with four locking screws . (ss), solid undreamed femur interlocking nail diameter 8-13 mm and length 32-44cm (1cm difference) with four locking screws. (ss), gentamicin antibiotic coated femur interlocking nail diameter 8-13 mm and length 32-44cm (1cm difference) with four locking screws . (ss), vancomycin antibiotic coated femur interlocking nail diameter 8-13 mm and length 32-44cm (1cm difference) with four locking screws . (ss), dfn (distal femoral nail) diameter 8-13 mm and length 32-44 cm with locking screws all size . (ss), sirus nail for femur diameter 8-13mm and length 32-44cm with locking screw . (ss), pfn short all size with locking screw all size . (ss), pfn long all size with locking screw all size . (ss), proximal femoral nail antirotation (pfna-ii) nail hybrid all size with locking screw all size . (ss), proximal femoral nail antirotation (pfna-ii) nail all size with locking screw all size . (ss), tibia interlocking nail diameter 8-12 mm and length 28-40cm (1cm difference) with four locking screws reamed and unreamed both . (ss), expert tibia interlocking nail diameter 8-12 mm and length 28-38cm (1cm difference with four locking screws . (ss), tibia interlocking nail length difference 1.5 cm (ss) with distal zig all diameter and all length (1.5 cm difference) with four locking screws reamed and unreamed both, solid (unreamed ) tibia interlocking nail diameter 8-12 mm and length 28-38cm (1cm difference) with four locking screws reamed and unreamed both . (ss), gentamicin antibiotic coated tibia interlocking nail diameter 8-12 mm and length 28-38cm (1cm difference) with four locking screws reamed and unreamed both . (ss), vancomycin antibiotic coated tibia interlocking nail diameter 8-12 mm and length 28-38cm (1cm difference) with four locking screws reamed and unreamed both . (ss), sirus nail for tibia diameter 8-12mm and length 28-38cm with locking screw . (ss), humerus interlocking nail diameter 6-9 mm length 22-36cm (1cm difference) with four locking screws . (ss), multi lock humerus interlocking nail diameter 6-9 mm length 22-36cm (1cm difference) with four locking screws. (ss), fibular nail 2.5mm and 3mm canulated nail with locking screw all size . (ss), 1/3 tubular plate 3.5 mm hole size 4-14 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), semi-tubular plate 4-14 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), low contact small d.c.p- 3.5 mm hole size 5-14 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), low contact narrow d.c.p- 4.5 mm hole size 5-14 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), t-plate 2.7mm 3-12 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), t-plate 3.5mm 3-14 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), t-locking plate 3.5mm 3-14 holes with screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), t-oblique locking plate 3.5mm 3-12 holes with compatible screws, cortical and cancellous, partially of fully threaded (any size and number, as per plate holes) (ss), locking compression plate 3.5 mm for l/e radius(volar plate) with head hole 3 and 5, compatible screws, cortical concellous, partially of fully threaded (any size and number, as per plate holes) (ss), locking compression plate 3.5 mm for l/e radius(dorsal plate) with head hole 3 and 5, compatible screws, cortical and concellous, partially of fully threaded (any size and number, as per plate ho

CTN :41208835

25 Aug, 2025 6.83 Lacs

Guntur - Andhra Pradesh

Tender For corrigendum : purchase of office furniture and other allied items - mingle modular plt conference table 14 seating head - w:1800mm x d850mm x h:740mm , 2str : w:1350mm x d:600mm x h:740mm, 1str : w:675mm x d:600mm x h:740mm work surface:made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. plastic abs access flap is provided for easy access to wires and cables. work top is available in various shapes as shown above understructure:it consist of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. aluminium alloy 63400 - wp profile is used for connecting panels together. the product has a knock-down construction modesty panel made of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. powder coated accent metal strip provided below work surface to enhance aesthetics. it is made of 0.8mm crca as per is 513,epoxy polyester powder coated (dft 40-60 microns). wire management - an array of panels made of 0.8mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns) is used for flow of wires and cables. provision to mount anchor roma 6 module plate is provided below worktop. cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop. accessories are provided for adding functionality to the products. document shelf is made of 1.2mm crca ms is:513 and is epoxy polyester powder coated (dft 40-60 microns). it is to be used for storing papers and accessing them quickly. hdmi wire cover is made of 0.8mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns). hdmi holder is made of 2mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns). the hdmi wire cover along with hdmi holder (part of same packet) to be booked for every provision for hdmi connection as per customer/av team requirement (except in head and corner module). name plate is provided to display the name of person and consists of two plates - inner and outer plate. they are made of 1.2 mm aluminium sheet and 2mm aluminium sheet respectively. they are tack welded to each other using tungsten inert gas welding. the name plate is epoxy polyester powder coated (dft 40-60 microns). product certificates : test certificate, indoor advantage™ gold, griha and greenguard., mingle unitized plt_10 seater st w:3000mm x d:1150mm x h:740mm work top:made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. access panels provided with soft closing hinges. understructure:the under-structure consists of mixture of 25mm and 18mm pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. anodised aluminium alloy 63400 - wp profile is added at bottom edges for improving the aesthetics. the product has a knock-down construction. wire raiser:a wire raiser made of 0.8mm crca ms is:513. it is epoxy polyester powder coated (dft 40-60 microns) for flow of wires and cables. cutout provision below access flap at two locations for standard 8 module anchor roma is provided. beside each cutout, an additional cutout with plate is provided for mounting audio visual cables (eg.hdmi, vga-a,etc)., thrill mesh plus highback chair seat/back ass embly: the seat is made up of 1.5 ±0.1 cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the seat has extra thick foam on front edge to give comfort to popliteal area. the back is injection moulded in glass filled polypropylene which is upholstered with mesh fabric. the back consist of adjustabl

Locking Screw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector