Latest locking screw Tenders | Government locking screw Tenders

State Government

CTN :41535673

09 Sep, 2025 NA

Bhubaneswar - Odisha

Tender For e- tenders are invited on behalf of the director, national institute of science education and research, jatni from the manufacturers(indian or foreign) or their authorised reseller/indian agent only for supply & installation of the following item--, unmounted linear polarizer, , description of item -, , wavelength range: 600-1100 nm, , extinction ratio bands: >1000:1 for 695-1100, , nm, , parallelism: <0.5 arcmin, , diameter: 25.4 mm (ø1"), , n-bk7 broadband precision window, , description of item -, , size: 25.4 mm (ø1"), , size tolerance: +0.0/-0.2 mm, , thickness: 1.0 mm, , thickness tolerance: ±0.1 mm, , clear aperture: >90% of diameter, , surface quality: 20-10 scratch dig, , ar coating range: 650-1050 nm, , parallelism: ≤1 arcmin, , reflectance over ar coating range: ravg< 0.5%, , damage threshold: 7.5 j/cm^2 at 810 nm, 10 ns, 10 hz, ø0.144 mm, , n-bk7 broadband precision window, , description of item -, , size: 50.8 mm (ø2"), , size tolerance: +0.0/-0.2 mm, , thickness: 12.0 mm, , thickness tolerance: ±0.3 mm, , clear aperture: 2045.72 mm, , surface flatness: ≤2/10 over ca, , surface quality: 20-10 scratch dig, , ar coating range: 650-1050 nm, , parallelism: ≤5 arcsec, , reflectance over ar coating range: ravg< 0.5%, , damage threshold: 7.5 j/cm^2 at 810 nm, 10 ns, 10 hz, 00.144 mm, , mid-infrared enhanced gold mirror, , description of item:-, , diameter: 7.0 mm, , diameter tolerance: +0.0 mm/-0.1 mm, , thickness: 2.0 mm (0.08"), , thickness tolerance: ±0.2 mm, , reflectance: rang> 98%, rats 95% from 2 µm to, , clear aperture: >06.3 mm, , 20 µm @ 0° to 45° αοι, , front surface flatness (peak to valley): <2/10 @ 633 nm, , substrate: fused silica, , surface quality: 40-20 scratch-dig, , parallelism:<3 arcmin, , 0.1 j/cm2 at 1.064 µm, 10 ns, 10 hz, ø1.06 mm 3 j/cm2 at 10.6 µm, 100 ns, 1 hz, ø1.29 mm, , damage threshold (pulsed):, , low-gdd ultrafast mirror, , description of item: -, , design wavelength range: 700-930 nm, , diameter: 38.1mm (ø1.5"), , diameter tolerance: +0.00/-0.10 mm, , clear aperture: >80% of diameter, , thickness: 12.0mm, , reflectance: r> 99% (700-930 nm); r> 99%, , thickness tolerance: ±0.20 mm, , (730-870 nm), , group delay dispersion:, , gdd < 30 fs² (700-930 nm), , angle of incidence: 45°, , gdd < 30 fs² (730-870 nm), , substrate: fused silica, , front surface flatness: 2/4, , front surface quality: 15-5 scratch-dig, , parallelism: ≤3 arcmin, , back surface: polished, , kinematic rotation mount, , description of item:-, , for mounting ø1" optics, , three 1/4"-80 lockable stainless-steel adjusters with removable knobs and brass bushings for, , smooth adjustments, , six #8 (m4) counterbored mounting holes al-, , low left-handed or right-handed orientations sm1-threaded (1.035-40) rotation ring with locking screw

CTN :41542530

01 Sep, 2025 NA

Delhi - Delhi

Tender For supply of swivel lock anchors assorted sizes , shoulder hemiarthroplasty set complete , bio rc ha screw assorted size , proximal tibial posteromedial locking plate 4 6 holes complete construct tt with compatible screws assorted size lt rt , lcp for proximal lateral tibia 11 13holes right left with 5 locking and 3 cortical screw tt , pfna ii proximal femoral nail 9 point 0 mm long right 130 length 300 mm titanium alloy tan sterile 01 prox blade 1 end cap and 2 locking bolt , acl flexible loop femoral tunnel assorted size , repid evaporation cooling system kit bandage a 10cm into 2m for wrist elbowm ankle injuries reusable , repid evaporation cooling system kit bandage b 12cm into 3m for tkr thr acl and pcl surgery reusable , coolant 250 500 mi enthanol based evaporating agent required to reacharge the reusable bandages , tennis elbow support , thumb spica , larginine usp 500mg , 300 ml canister with gel should be 5 lumen tubing for active or vac ulta unit , 500 ml canister with gel should be 5 lumen tubing for vac ulta unit , glucosamine rose hip extract vit d tab , collagen peptide type 1 40mg sodium hyaluronate 30 mg, chodroitine sulfate 200mg, vitamin c 35 mg tab , larginine usp 1000mg lysine monodrail zinc , elemental calcium 250mg vitamin d3 ip 100 iu tab , llysine monohydrate usp 200mg suflhote vitamin b6 , trypsin 48 mg plus bromeline 90 mg plus rutoside 100 mg enteric coated , lcp distal radius plate tt rt lt with 4 cortical 4 locking screw assorted size with complete set , fast fix straight curved , 1000 ml canister with gel should be 5 lumen tubing for vac ulta unit ) /bid number : gem/2025/b/6494629 * /dated: 22-08-2025 & & / bid document 1 / 23

CTN :41011908

26 Aug, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of distal radius external fixator system with distractor compression unit 02 x 3pt5 mm and 02 x 2mm schanz screws , minifragment plate 2pt7 mm with 6 screws titanium , distal radius external fixator with adjustable ball and socket hinge , flexible intramedullary reamer 7 mm , interlocking humeral nail cannulated for humerus complete construct with 04 interlocking bolts and 01 end cappt titanium , antegrade femoral nail system complete construct right or left with 04 locking bolts and 01 end cap titanium , distal radius locking plate variable angle complete construct with 6 locking and 3 cortical screws titanium , distal radius lcp t plate 3pt5mm complete construct with 3 locking and 3 cortical screws titanium , clavicular anatomical plate 3pt5 complete construct lt rt side 6 cortical screws titanium , distal end clavicular plate rt lt low profile 4 locking 4 cortical screws complete construct ti , proximal humerus anatomical locking plate complete construct6 locking 4 cortical screwsti , distal humerus anatomical medial plate 3pt5 lt rt complete construct 6 locking 4 cortical screws ti , distal humerus anatomical posterolateral plate 3pt5lt rt complete construct 6 locking 4 cortical screws ti , olecranon plate anatomical 3pt5 lt rt complete construct 6 locking 4 cortical screws ti , locking reconstruction plate 3pt5 ti 14 hole twelve 3pt5 locking head ti screws , meniscal cinch for all inside meniscal repair , all inside meniscal repair implant systempt , clear trac cannula 5 mm to 10 mm various sizes , cling drape film roll sterile transparentpt , fibre suture 2 mm for acl graft preperation , polybutylate coated braided polyester orthosuture 5 1or2 circle taper cut 45 single needle ethibond sterile foil single thread box 10 12 , iodinated adhesive incise drape different sizes large , tibial nail with multiple proximal interlocking options tip locking 6 x locking bolts 01 end cap ti , trochanteric hook plate , ti distal fibula locking plate 6or7 hole rt 3pt5 combihole 5 2pt4 or2pt7 coxial holes in distal end 02 cortical 06 locking screws

Central Government/Public Sector

CTN :41531423

12 Sep, 2025 NA

Mumbai - Maharashtra

Tender For supply of titanium calcaneal plate (locking )set of 1 plate + 6 locking screws - imported, interchangeable size

Central Government/Public Sector

CTN :41531528

10 Sep, 2025 NA

Mumbai - Maharashtra

Tender For supply of reverse shoulder replacement set 1.reverse shoulder glenoid base plate*1,2.reverse shoulder humeral tray *1.3.primary stem un cemented- standard size *1,4.versa dial/standard taper *1,5.reversr shoulder standard metaglene *1,6.reverse control screw *1,7.arcom xl standard humeral bridge *1,8.fixed non locking screw *1,9.fixed locking screw *2, 10.company to provide all set of implants and instruments at the time of surgery,12

CTN :40673812

23 Aug, 2025 NA

Ernakulam - Kerala

Tender For bid to ras bid to ras bid to ras corrigendum : tender for supply of spacer bush , oil orifice , oil orifice , oil flow switch , suction gas filter , oil filter , screwed socket , sealing plug , sealing screw , clamping plate , gasket back cover , 0 ring , hexagon head screw , hexagon head screw , self locking screw with serrated bearing surface , cheese head screw , cheese head screw , cheese head screw , cheese head screw , grooved nut , grooved nut , retainning ring , retainning ring , spring washer , spring washer , sealing lip , parallel pin , round head grooved pin , key , cylindricall roller bearing(male)

CTN :40540139

30 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of regulator flange , sealing plug , sealing screw , o ring , hexagon head screw , hexagon head screw , self locking screw with serrated bearing surface , cheese head screw , cheese head screw , cheese head screw , cheese head screw , cheese head screw , cheese head screw , head socket cheese head screw , gasket ring , main rotor , secondary rotor , spacer bush , piston complete , thrust spring , coil , valve complete , oil side glass , screwed socket , socket screw , grooved nut , grooved nut , dowed pin , ptc sensor , suction gas filter , check valve , piston ring , lip seal

CTN :41375581

23 Aug, 2025 NA

Pithoragarh - Uttarakhand

Tender For bid to ras supply of supply of completed stores of frp toilet block 01 nos d d - pvc swr bend with oval access door 110mm dia , pvc swr bend plain 110mm dia , pvc swr tee 110mm dia , pvc short connection 300 oblique 450mm long , each shelter should have 01 nos of 500 ltrs hdpe water tanks triple layer , ppr gate valve 32mm outer dia , ppr tank connector inner dia 32 mm , ppr elbow 32mm dia , ppr tee 32mm dia , sealing thread , ppr tee reducer 15x 25 mm inner dia , ppr pipe 20mm outer dia with complete fitting , ppr pipe 32mm outer dia with complete fitting , ppr union 32mm dia , ppr socket 32mm dia , ppr elbow 20mm , ppr socket 20mm , ppr reducer socket 32mm x 20mm , cp bib cock long body chromium plated 15 mm dia , cp pillar tap 15 mm bore , cp stock cock of 15mm bore , vitreous china wash hand basin and white and flat back and size 580 x 400mm including cp waste coupling and pvc waste pipe and complete fixing , bathroom cabinet with looking mirror for toiletry items of size 300mm x 450mm with arrangements to fix the same with wall shall be provided , frp iwc of standard size in three cabins with s oblique p trap shall be provided with flushing cistern , ppr wall clamp dia 25mm , 100mm dia stainless steel grating , ss soap dish holder , silicon tube 200gm , solar street light 25w including pole having length 5 mtr long and 75mm dia and complete accessories warranty for street lighting system including battery min 2 years , fd water heating eqpt solar oblique k oil based with 500 ltr tank capacity and made of 2 mm thick stainless steel sheet grade 304 and ms angle and frame legs of size 40 x 40 x 5 mm thick , cgi sheet 3000mm x 900mm x zero point 60mmconfirming to is 277 , gi pipe 50mm dia and 2400 long , barbed wire 14 swg and 2mm thick , laip 45 x 45 x 6mm and 1830mm long , silicon gun for applying silicon tube , drilling machine portable , mason thread nylon 3mm dia x 100 mtr long roll , adjustable spanner 10 inch , screw driver , self supporting aluminium step ladder 6 feet height , trawal brick 250mm , shovel hand gs 12 feet 1 point 6 kg with fibre handle , measuring tape 5mtr retractable grade ai 16 , hand gloves rubber

CTN :41193746

25 Aug, 2025 15.00 Lacs

Bhiwadi - Rajasthan

Tender For corrigendum : hiring of ot implants in government hospital bhiwadi - general items for ortho ot, femur interlocking nail diameter 9 to 12 mm and length 36-44cm (1cm difference) with four locking screws . (ss), solid undreamed femur interlocking nail diameter 8-13 mm and length 32-44cm (1cm difference) with four locking screws. (ss), gentamicin antibiotic coated femur interlocking nail diameter 8-13 mm and length 32-44cm (1cm difference) with four locking screws . (ss), vancomycin antibiotic coated femur interlocking nail diameter 8-13 mm and length 32-44cm (1cm difference) with four locking screws . (ss), dfn (distal femoral nail) diameter 8-13 mm and length 32-44 cm with locking screws all size . (ss), sirus nail for femur diameter 8-13mm and length 32-44cm with locking screw . (ss), pfn short all size with locking screw all size . (ss), pfn long all size with locking screw all size . (ss), proximal femoral nail antirotation (pfna-ii) nail hybrid all size with locking screw all size . (ss), proximal femoral nail antirotation (pfna-ii) nail all size with locking screw all size . (ss), tibia interlocking nail diameter 8-12 mm and length 28-40cm (1cm difference) with four locking screws reamed and unreamed both . (ss), expert tibia interlocking nail diameter 8-12 mm and length 28-38cm (1cm difference with four locking screws . (ss), tibia interlocking nail length difference 1.5 cm (ss) with distal zig all diameter and all length (1.5 cm difference) with four locking screws reamed and unreamed both, solid (unreamed ) tibia interlocking nail diameter 8-12 mm and length 28-38cm (1cm difference) with four locking screws reamed and unreamed both . (ss), gentamicin antibiotic coated tibia interlocking nail diameter 8-12 mm and length 28-38cm (1cm difference) with four locking screws reamed and unreamed both . (ss), vancomycin antibiotic coated tibia interlocking nail diameter 8-12 mm and length 28-38cm (1cm difference) with four locking screws reamed and unreamed both . (ss), sirus nail for tibia diameter 8-12mm and length 28-38cm with locking screw . (ss), humerus interlocking nail diameter 6-9 mm length 22-36cm (1cm difference) with four locking screws . (ss), multi lock humerus interlocking nail diameter 6-9 mm length 22-36cm (1cm difference) with four locking screws. (ss), fibular nail 2.5mm and 3mm canulated nail with locking screw all size . (ss), 1/3 tubular plate 3.5 mm hole size 4-14 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), semi-tubular plate 4-14 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), low contact small d.c.p- 3.5 mm hole size 5-14 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), low contact narrow d.c.p- 4.5 mm hole size 5-14 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), t-plate 2.7mm 3-12 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), t-plate 3.5mm 3-14 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), t-locking plate 3.5mm 3-14 holes with screw cortical or cancellous partially or fully threaded any size and number as per pate holes.(ss), t-oblique locking plate 3.5mm 3-12 holes with compatible screws, cortical and cancellous, partially of fully threaded (any size and number, as per plate holes) (ss), locking compression plate 3.5 mm for l/e radius(volar plate) with head hole 3 and 5, compatible screws, cortical concellous, partially of fully threaded (any size and number, as per plate holes) (ss), locking compression plate 3.5 mm for l/e radius(dorsal plate) with head hole 3 and 5, compatible screws, cortical and concellous, partially of fully threaded (any size and number, as per plate ho

Central Government/Public Sector

CTN :41514639

15 Sep, 2025 NA

Bhusawal - Maharashtra

Tender For supply of set of miscellaneous items for earth ret [set of miscellaneous items for earth return brush holder assembly of 3 phase locomotive as per spec. no. clw/es/3/0017 alt `d and clw drawing no. clw/es/3/sk-1/0017/d as follows 1) insulating bush-1 (item no. 3), qty - 500 nos., 2) insulating bush-2 (item no. 4), qty - 500 nos. 3) verbus rip screw m10 x 20 mm along with plain and spring washer (item no. 7), qty - 50 nos., 4) hexagonal bolt m6 x 16 mm along with plain and spring washer (item no. 8), qty - 50 nos., 5) safety nut (nylock) m10 (item no.13), qty - 200 nos., 6) locking screw m10 x 48 mm (item no.11), qty - 200 nos., 7) inbus rip screw m8 x 20 mm (item no. 6), qty - 500 nos. one set consisting of 07 items in 2000 nos. material to be procured from clw approved sources only as per clw item id -2100414. ]

Locking Screw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector