Latest logic controller scrap Tenders | Government logic controller scrap Tenders

CTN :45416327

16 Jun, 2026 11.00 Lacs

Payyanur - Kerala

Tender For supply of multi process control trainer setup for instrumentation engineering lab under mhrd scheme - purchase of multiprocess control trainer setup for instrumentation engineering lab under mhrd scheme - multiprocess control trainer set up, multiprocess control trainer set up - specifications:- setup must contain flow, pressure, level, temperature loops also derived loops like cascade and feedforward loops. temperature loop must be independent. setups consist of a circulating closed loop water plant or circulating water system including control valve, tanks, independent pumps and necessary valves including bypass valves and rotameters. using this we can be able to do flow control loop with pid,level control loop with pid,and pressure control pid, as independent experiments.the setup must include the following:1.one linear characteristics diaphragm operated control valve with 15mm stroke 1/2-inch size, type: high-capacity globe seat leakage class (as per ansi/fci 70.2).2.measuring tank with volumetric measurement scale and 1000mm level, in of 25 ltr capacity. sump tank min of 40 ltr capacity. all tanks made of ss304, with sight glass, and finished with mat steel finish.3.2 no s smart dp transmitter for flow and level measurement with hart protocol, display and keys integrated for calibration,0-1000mmh2o measurement range,0.01% accuracy, international iso certified ce approved make,24v supply,4-20ma output, loop powered.4,1nos of magnetic flowmeter with display and keys integrated for calibration,0-2000lph measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, international iso certified ce approved make,24v supply,4-20ma output to measure flow as a independent loop.5,. smart pressure transmitter and temperature transmitters with hart protocol, display and keys integrated for calibration, pressure transmitter 0-10bar measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, temperature transmitter 0-250 rtd type international iso certified ce approved make,24v supply,4-20ma output, loop powered.6, pressure tank of 24 liters with necessary valves for pressure loop.7.1nos orifice plate (ss304) and assembly grade with flange 1/2-inch size for flow measurement.8.2 nos pumps 0.5hp, ss centrifugal pump, minimum 1-inch pipeline of ss or high-pressure withstanding plastic with plastic welding.9. rotameters 2nos 1 inch size flow: 200-2000 l/h,ss thread, clear acrylic type.10, plc control station with 4 analogue inputs and one analogue output with necessary digital inputs and outputs to operate all loops directly from panel side.plc must have ethernet connectivity with supported protocols profinet and modbus tcpip.11.required all pneumatic components to full fill the process loops such as fr,needle valves etc.12,i to p converter 4-20ma to 3-15psi with 1/4" process connection with proper copper copper tubing.13, loop including flow pid control, level pid control, pressure pid control, cascade control (level flow), ratio control (flow flow).14.all loops can be operated using a scada system and independent pushbutton control includes trend of all analogue signals and pid tuning. scada direct profinet connectivity to plc and computer with intel i5 processor, 8gb ddr3 ram,1tb sata hdd,licenced windows 11 professional.15, required a standalone software application that must be installed on pc in which it can used to control and monitor all the functions used in scada. the application must contain process parameter trend graph plot for to study about process loops.16.the whole system setup must be in ms powder coated standalone mobile table with lockable castor wheels. all the components used be industrial. copper tubing for air connection, pressure gauges 4inches 3nos, electrical wiring connection to be flexible for to connect field devices. panel with switches, indicator, test points with banana connectors as required, multistrand wire with proper insulated lugs, ferruling & neat wire dressing & clam

CTN :45415554

18 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For purchase of equipment - purchase of equipment: dual pump nanofiber electrospinning unit, 1. high voltage power supply output: 0 40 kv, positive & negative polarity, digital control with current limiting and safety interlock2. syringe pump system dual syringe pumps, upgradeable to triaxial (3) or four (4) syringe configuration flow rate range: 0.001 20 ml/hr, compatible syringe size: 1 60 ml3. spinneret system stainless steel needles (18g 30g) capability for single, coaxial and triaxial electrospinning, multi-needle spinning provision4. collector system interchangeable flat plate and rotating drum collectors (different sizes), drum speed: 0 5000 rpm adjustable tip-to-collector distance: 5 30 cm5. environmental control chamber fully enclosed electrospinning chamber, temperature control: ambient 60 c humidity control: 20 80% rh6. control & automation touchscreen / pc-based operation, programmable process parameters real-time monitoring of voltage, flow rate, collector speed, temperature and humidity7. digital interface & data handling advanced digital interface for system control, high data storage capacity for experimental records data export through usb / ethernet8. safety features, fully grounded system door interlock for high-voltage safety emergency stop and overload protection9. accessories & support syringes, needles, grounding cables and collector substrates, on-site installation and user training, operation manual warranty: minimum 2 year

CTN :45358061

18 Jun, 2026 NA

Guna - Madhya Pradesh

Tender For supply of various items of lab equipments for govt. p g college guna district guna (m.p.) under p m usha pariyojna 4th call - supply of various lab equipments items for govt. p g college guna district guna (m.p.) 4th call, waterand soil testing analysis kit (digital) : range ph 0 to 14.00 resolution ph 0.01 accuracy ph 0.01 1 digit temp. comp. 0 to 100 deg. c., water bath (06holes) : 6 hole8 ltrs., waterbath(12holes) :12 hole 20 ltrs., water distillation apparatus(single distillation unit 2 litre/hour) : single distillation 5 litres, analytical balance : least cosunt 0.0002g, analytical weight box : 1-100g, fractional weight box : 1-500mg, physical balance : 250gm accuracy 0.1g, digital balance : least count 1mg, single pandigital balance : 0.1mg 200g, digital photoelectric colorimeter : 8 filter,1 ml, digital potentiometer : with hot plate and electrodes, digital conductometer : with cell 1cc and 0.1cc, d.o. meter : polarographic do range: typically 0 to 90 mg/l (milligrams per liter) or 0 to 600% saturation.rdo (optical) do range: usually 0 to 50 mg/l or 0 to 500% saturation., digital naphelo/turbidity meter : digital turbidity cum nephelometer range:-, 200,1000 ntu/jtu resolution:- 0.01 ntu/jtu accuracy:- 3% fs, 1digit display:- 3 digit 7-segment led light source:- ir led detector:- photodiode sample system:- 60 x 25mm clear glass test tubes power:- 230 v 10% ac, 50 hz accessories:- test tube set of 2, operation manual, dust cover, polarimeter half shade : the specific rotation ( ) is a physical property defined as the optical rotation at a path length of 1 dm, a concentration of 10 g/l, a temperature (usually 20 c), and a light wavelength (usually sodium d line at 589.3 nm), melting point apparatus :melting-point measurement range: room temperature - 400 c setting rate of the starting temp. : 50 c~400 c 5 min; 400 c~50 c 7 min minimum digital display: 0.1 c size of the capillary: 1.4mm (outside diameter) 1.0mm (inside diameter), 90mm equipped with color camera and color monitor to observe melting point with ease validation program for standard samples 8 operator names can be storedgraphic lcd display to display all test parameters & test instructions, digital melting point apparatus :melting point measurement range : ambient to 300 deg c starting melting point temperature : settable from 50 to 300 deg c heating time : 3 minutes (up to 300deg c) cooling time : 5 minutes (from 300 deg c) accuracy : +/ 0.5 deg up to 200 +/ 0.8 deg from 200 to 300 temperature display resolution : 0.1 deg c rate of heating (deg c per minute), abbe refractometer : safety bs en 60950-1:11/2006 emc en 55024 : 10/2003 en 55020 : 11/2005, tlc kit : outstanding standardization and quality control exceptional adherence, hardness and surface homogeneity. analyzing samples with high matrix- load without sample preparation. multiple samples analyzed in parallel.highly cost-efficient, fast and economical, centrifuge : 6000rpm, corkboring machine :adjustable guide that permits holes to be bored in any part of a stopper, the knurled chuck - 9/16" (14mm) shank of the eight, plated-steel borers included with the unit. the steel borers range from 3/16" to 5/8" (4.8mm to 15.9mm) in 1/16" (1.6mm) increments,, distillation apparatus : single distillation 5 litres, oven hot air : 14" 14" 14 , voltage stabilizer : 2kv, vertex shaker : 6 tube capacity, mixer small : moter capacity 900 watt, water bath(cu) : 4 , heating mantle with energy regulator : 500 w,2litre, single crucible heater : helical wire coil moldatherm insulation platinel ii thermocouple with 10tm compensated lead wire and polarized plug ceramic fiber hearthplate programmable heat-up to setpoint temperature indicates setpoint and process temperatures temperature: 1200 c (2192 f) maximum crucible sizes: 5 (top vestibule id) x 8 (heated depth), water bath rectangularsingle walled : 6 hole 8 ltrs., water bath rectangular :2 hole, kjeldahl distillation unit : unit of 3 tests, microwave oven : 30 ltr co

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

Central Government/Public Sector

CTN :43205633

21 May, 2026 NA

Bastar - Chhattisgarh

Tender For bid to ras supply of process water temperature control and monitoring system

State Government

CTN :45167644

08 Jun, 2026 NA

Rourkela - Odisha

Tender For supply and installation of equipments for control system laboratory in electrical engineering department, cupgs, bput, rourkela, odisha -, dc motor driven position control system trainer kit , frequency response of lag-lead compensator -trainer kit , second order process trainer with p, pi and pid control apply to servomotor trainer kit , position control system using synchroscope -trainer kit , two phase ac servomotor trainer kit , temperature control system trainer kit , determination of transfer function of a rlc system using transfer , function analyser trainer kit , study of stepper motor-trainer kit

CTN :45166092

25 May, 2026 NA

Multi City - Multi State

Tender For camc of tas with re 2026-27 - batch controller card readers pd meter with pulse transmiter-3 strainer-3 air eliminator-3" digital control valves with solenoids-3 rtd remote interactive terminal digital control valve pneumatic-3" mass flow meters-3" pressure gauges pressure transmitters temperature transmitters lrc (senver stations) client pc- oic ttes, saptas and tfms terminal server 16 port ethernet switch 24 port ethernet switch 08 port networking panel pop panel process plc panel safety plc panel printer smart terminal manager software tfms software barrier gates edu with annuciation system ups system-2 x 15kva hooters esd push buttons radar gauge (hub, mstw, tsi) radar gauge (guided wave) level switches pressure switches ciu (fcu) earthing relay units for ethanol unloading

State Government

CTN :43717082

30 Apr, 2026 6.33 Crore

Multi City - Karnataka

Tender For corrigendum : supply of disposables - non drugs for the department of cssd - bowie dick test-1 test, absorbent surgical gauze schedule f ii, starch free, yarn count 40sx40s, weight 30+/- 5 gms/square meter, mesh 26x18 threads /square inch with absorbency not more than 10 seconds,thickness 65-70 microvs,loose woven density 70/sq cm -1 meter, tyvek rolls size from 45 cms x70 mtrs-1 roll, tyvek rolls size from 40 cms x70 mtrs-1 roll, tyvek rolls size from 35 cms x70 mtrs-1 roll, tyvek rolls size from 30 cms x70 mtrs-1 roll, tyvek rolls size from 25 cms x70 mtrs-1 roll, tyvek rolls size from 20 cms x70 mtrs-1 roll, tyvek rolls size from 15 cms x70 mtrs-1 roll, tyvek rolls size from 10 cms x70 mtrs -1 roll, tyvek rolls size from 7.5 cms x70 mtrs-1 roll, tyvek rolls size from 5 cms x70 mtrs-1 roll, wraps disposable, non woven sizes 120 x 120 cms-, ultra sonic cleaning indicator, type -6 steam emulating indicators, type -4 indicator for steam sterilization with adhesive for documentation, three line label for plasma process, thermal printer roll size 4 inches x100 mtrs. - 1 roll, teflon sealing brown belt for sealing machine-24 nos, steri record system labeller, steri record system labeler and ink cartridges, steri record labels (eto) - 3 lines -1 roll, steri record labaels (steam) - 3 lines -1 roll, stainless steel suture needles specification half circle triangular cutting needles sizes -7, 8, 9, 10, 15 and16., stain removing solution -1 ltr, silicon full arm gloves, sealing machine for sealing of sterilization packaging reels, rapid biological indicator for steam sterilization, rapid biological indicator for eto sterilization, rapid reader 490 (55 degree c), rapid reader 490 (37 degree c), printer for eto machine for steam sterilizer, packaging indicator with adhesive class 4 and 5 type, mild alkaline enzyme cleaner for washer disinfector belimed make, lot control tester for steam, lot control tester for eto, kimguard sheets - 90 x 90 cms, kimguard sheets - 60 x 60 cms, kimguard sheets - 120 x 120 cms, kimguard sheet 75x75cms, indicator tape dispensor, gloves- (above elbow) no 7,7.5, gas sterilisation flat peelable integra med reel 75 mm x 200 mts. 1 roll, gas sterilisation flat peelable integra med reel 50 mm x 200 mts. - 1 roll, gas sterilisation flat peelable integra med reel 400 mm x 200 mts. - 1 roll, gassterilisationflatpeelableintegramedreel350mmx200mts1roll, gas sterilisation flat peelable integra med reel 300 mm x 200 mts.- 1 roll, gas sterilisation flat peelable integra med reel 250 mm x 200 mts.- 1 roll, gas sterilisation flat peelable integra med reel 200 mm x 200 mts. - 1 roll, gas sterilisation flat peelable integra med reel 150 mm x 200 mts- 1 roll, gas sterilisation flat peelable integra med reel 100 mm x 200 mts. - 1 roll, foam spray autoclave cleaning for rust and stains-1 litre, flat peable packing reel for gas sterilization 450 mm x 100 mtrs. - 1 reel, eto sterilization indicatortype 4 -1 roll, eto printer roll, eto indicator roll 18mm x50 meters, eto cartridge for 8 x l 3m gas sterilizer- 170 gms, eto cartridge for 5xl 3m gas sterilizer 100gms, disposable, non radio opaque mops with tags of sizes 30 x 30 cms, disposable, non radio opaque mops with tags of sizes 10 x 10 cms, curved cutting needles stainless steel size- 7 to 16 nos., cleaning sponge with enzyme for catheter lumens, carbon cartridge for system labeler-1 unit, biological indicator with pcd steam-, biological indicator with pcd eto-, biological indicator 1264, biological indicator 1262, biological indicator eto for instant release, bi for plasma for instant release, belt b-40 for gauze cutting machine, batch monitoring integrator for plasma sterilization, batch monitoring integrator for helix pcd type 2, batch monitoring integrator for eto sterilization (pcd -type-2), bandage cloth open woven bleached, starch free as per schedule f ii, with yarn count 30feetx20feet. mesh 38x22 threads per square inch and weight 57 plus or minus 5grms per square met

CTN :43845124

29 Apr, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of system for remote operation and control for kneading process as per spec no. hemrl/gps/kneader/2025

Central Government/Public Sector

CTN :44966963

06 May, 2026 4.03 Crore

Hyderabad - Telangana

Tender For auction sale of plant and machinery - plant & machinery like drill machine magnetic core cutting, welding machine annual rate contract portable, vaccum distillation unit, air compressors, effluent treatment plant, drilling machines, electrical equipment, diesel generators, angle grinders, hydraulic press brake, mechanical shearing machine, jigs and fixtures, angles punching machines, band saw machine, steel straightening machine, white fume extraction system, angle punching marking and shearing machines, stamping machines, cnc machines, bending furnace, multi-purpose hydraulic machine, process tank frp, acid fume extraction system, electronic weighbridge, disc marking /angle punching, marking and shearing cnc lin, beams drilling and sawing angles, for cut size plates, semiautomatic ficep/model frvl 200, tank galvanized, zinc tank, acid pickling tank, suvs/cars/two wheelers , eot crane, hydraulic mobile cranes, double girder cranes, hydra, control panels, cylinder trollies, mono block pump sets, office equipments, raw material and finished products, shed, fabrication shed / ms structure with profile sheet roof and galvanized plant shed etc.

Logic Controller Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector