Latest louver scrap Tenders | Government louver scrap Tenders

Central Government/Public Sector

CTN :45735808

16 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of kit for locking arrangement for center pivot pin to drg. no. wd-85079/s-2, alt-28 consisting of (1) shackle lock- item no 7, (2) pin- item no 8, (3) split pin to size 3.5mm dia and 50mm length. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

CTN :45722033

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and installation for portable cabin furniture item and electric item for senior citizen in vile parle east beat no.84 in k/s ward.- providing & laying dry stone rubble soling , p/l 1:3:6 cc, , uncoursed rubble masonary in foundation, , nominal mix of 1:2:4 (1 cement opc: 2 coar, , providing & fixing full height both, , providing and fixing 2mm thick antistatic, , providing and fixing superior quality, , providing and fixing in position two track, , p&f in position aluminum louvered, , providing and fixing ms safety grill of, , w.c. pan with isi marked white solid, , providing & fixing in position make cp jet, , p/f wash basin, , providing and placing polyethylene, , p/f bib cock, , providing and fixing of modular table of, , providing and supplying center pivot,, , providing and supplying visitor chair, , st. street pole benches 6f-d-ro1,6f-, , p/f exhaust fan, , light/fan/ex.fan point, , supply & inst of 150mmx150mm led, , mcbs in 16 swg crca sheet steel, , 63a sp mcb, , 3 noss. single core cu pvc insulated, , supply & inst. of water purifier, , nominal capacity 1.0 tr (3024 kcal / hr.

CTN :45720895

01 Jul, 2026 25.00 Lacs

Pali - Rajasthan

Tender For annual rate contract for annual maintenance and spare parts supply work of jcb machines. - cylinder liner, over haul gas kit, valve inlet exhaust, crank shaft, main bearing set, trust washer, piston, piston ring set, diesel main pipe, diesel filter pipe, thermo state elbow, air cleaner hose, diesel pump repair with parts, thermo state valve, connecting rod, con. rod bearing set, cam shaft bush, rocker arm, rocer arm shaft, gear cam shaft, water pump assy., oil pump assy., oil filter, belt, engine mount pad, exhaust elbow, engine throttle cable, engine stop cable, turbo charger assy., silencer exhaust abi, flang exhaust, element main, element secondary, auto tensioner, idler gear, engine fan, fuel filter assy., filter kit, engine connecting rod, fan drive puley, hyd. strainer, suction strainer, fuel injection pump, injector pipe, rubber hose, fuel filter assy., nozzle, return line, fuel module with sensor, fuel tank cap, fip repair with parts, radiator, radiator assy., coolent, hose top, hose cac (cold side), hose cac (hot side), radiator solding, front grill, front grill lock, front wheel and axle, axle service, center pin, axle stub, hub, hub stud, hub seal, seal cone, bearing inner, bearing outer, axle carrior l/h, axle carrior r/h, track rod, brake fri. plate, brake cou. plate, brake seal, brake oil 500ml, differential, differential gear planet, gear planet, bearing roller double, seal cassetle, bearing teper, tripling seal, stud wheel, carrior innulus, gear innulus ring, hub palentry, drive shaft, bearing roller, bearing teper roller, yoke, cross patti & bolt, cross holder, uj cross, bearing, brake, master brake cylinder, pipe brake l/h, pipe brake r/h, brake reserver, steering, coupling, bearing, rim steering wheel, self starter, self starter, solenoid, switch altinator, altinator puley, wheel belt 1232, rocker plate, field set, armature bush set, bearing assy., carbon set, bendex, armature, armature bush set, altenator, starter, cut out, rectifier plate, bearing, bearing plate, rotor, terminal, wiring and electrical, wiring harness complete, bettery cable, hour meter, head light bulb, tail light bulb, fuse and reley 15 amp, tail lamp, head light assy., ignition switch, wiper blade assy., harness roof, combination switch, fog lamp, body, side mirror, seat, wiper motor assy., wiper blade, catch window, latch l/h, wind screen front, glass outer l/h, glass outer r/h, rear window glass, door soccker, door hinge, lock set inner, lock set outer, door got set, door belt, transmission, transmission over, charging pump assy., counter plate, firction plate, transmission filter, bearing, bearing, torque converter, bearing, converter, drive plate kit, mounting, yoke coupling, lever assy. gea turret, selonoid valve assy., strainer, transmission filter, stabliser, steblizer piston, steblizer rod, inner leg steblizer, steblizer foot, pin pivot, adjuster, atb rear pad kit lower, atb rear pad kit upper, hydraulic, ind. steering suct, selonoid coil, hyd. filter assy., hyd. filter element, mrv, hyd. pump, repair kit, priority valve, ram seal, pump seal kit, pump steering, ramp bucket, ramp bucket, ramp bucket, ram, bucket lift cylinder ram, bucket tilt cylinder ram, boom ram, loader ram, loader jaw ram, dipper ram, slew cylinder ram, stablizer ram, steering cylinder ram, 6 in 1 ram, hose, hose-10-bsp 560mm, hose-08-bsp 1860mm, hose-10-bsp 2750mm, hose-04-10bsp 1825mm, hose-08-bsp 2620mm, hose-10-bsp 2520mm, hose-08-bsp 2860mm, hose-08-bsp 2650mm, hose-12-bsp 3900mm, pin and bush, bucket pin, pin, pin, tipping lever, pin dipper, bush, bush, pin, boom main pin, pin, pin top, pin pivot, pin pivot, pin boom ram, pin pivot, pin pivot, pin pivot, kpc kit and bush, bucket kit, seal kit, bucket seal kit, dipper seal kit, boom seal kit, seal slew kit, s t b, steering seal kit, loader seal kit, lift seal kit, bucket seal kit, rubber seal kit, boom seal kit, s t b kit, slew seal kit, loader seal kit, steering seal kit, loader and bucket welding, l

CTN :45717053

18 Jul, 2026 55.00 Lacs

Hisar - Haryana

Tender For tender for supply of central pivot system -center piviot machine , hdpe and aluminium pipe as per buyer need , submercible and monoblock pump sets starter valves , electrical armoured cable as per buyer need , civil work as per buyer need , rcc pond , installation commsioning and training of pivot system

Central Government/Public Sector

CTN :45709465

20 Jul, 2026 NA

Dahod - Gujarat

Tender For supply of hex head bolt & castel nut for center pivot arrgt to icf drg.no.t-o-6-614.alt.d/nil. item.1,2,3,4,5. item: 1)hex. head bolt ?is:1364(part-1)/ iso 4014-m24x110-8.8=01nos.2)castle nut m24 is:2232-b-8 =01nos., 3)punched washer a 26 is:2016 =01nos., 4)split pin dia5x56mm to drg no. t-0-6-601 alt s/17 is:549=01nos, 5)washer iso 7089-24-200hv=02nos. note1) zinc electro plating to a3l of is:1367(part-eleven) , 2)bolt shall be of make tvs or dflor unbrako or lps only, 3)item 3-punched washer and item-4 split pin and item-5 washerall galvanised to is-1573-86 service grade no.2 of tab- 2, 4)hole shall be throughlycleaned and applied with rust prevention oil., 5)split pin should be galvanized to is:1573-86 service grade no.2 of tab-2. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45702805

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45702806

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.

CTN :45708638

20 Jul, 2026 NA

Multi City - Multi State

Tender For supply of cast steel bolster with integrated 14'' center pivot bottom for lwlh25 bogie as per rdso drg. no. wd-13012-s-5 (sheet 1, 2) with latest alteration (item no. 1 duly welded with item no. 2,3,4) confirming to rdso spec. no. wd-40 lwlh25 bogie (''k''- class)-2015 with latest amendment. material & spec. as per drg. and rdso spec. [ warranty period: 72 months after the date of delivery ] ]

State Government

CTN :45685523

08 Jul, 2026 44.62 Lacs

Bharuch - Gujarat

Tender For providing and supplying furniture for iti valia, dist.bharuch - providing and supplying high-back chair with a durable metal framework, upholstered with artificial leather/leatherette and molded pu foam. the chair shall include molded seat and back covers, with the back foam ergonomically contoured to provide lumbar support for enhanced comfort. the chair shall be equipped with high-durability casters and a hydraulic system. it must feature a gas lift cylinder with a minimum 5-year warranty. the overall dimensions of the chair shall be approximately 53 cm (w) x 79 cm (h) for the back, and 51 cm (w) x 49 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall have one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism allowing 360° rotation, 12° seat tilt, and 19° back tilt with a front pivot for tilting, ensuring the user's feet remain on the ground for added comfort. additional features shall include tilt tension adjustment, static seat depth adjustment of 0.5 cm, 5-position locking system, and an anti-shock back mechanism to prevent sudden impact when the backrest lock is released. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying medium-back chair with a durable metal framework, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam. the chair shall include molded seat and back covers, with the back foam contoured to provide lumbar support for added comfort. it shall have high-durability casters and a hydraulic system with a gas lift cylinder having a minimum 5-year warranty. chair dimensions shall be approximately 47.5 cm (w) x 58 cm (h) for the back, and 49 cm (w) x 48 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall include one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism offering 360° rotation, pneumatic height adjustment, 17° maximum tilt, and tilt tension adjustment. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying law back chair for work center & other staff the seat & back are made of m.s frame work. upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, together with molded seat & back covers. the back foam should be designed with contoured lumber support for extra comfort. caster of high durability & hydraulic. the chair should have cylinder with 5 years warranty. the size of chair 45cm x 45cm (back side) and 45cm x 43cm (seat size). the pu foam should be molded with density =45 ± 2 kg/m3 .with one piece armrests. the armrests are scratch and weather resistant. the permanent contact mechanisms is designed with 360° revolving type, with pneumatic height adjustment & 17° maximum tilt only & tilt tension adjustment facility. complete as per sample approved and as directed by the architect and approved by the engineer in charge , providing and supplying visitor or guest chair with seat and back made of 12 mm thick hot-pressed plywood, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, along with molded seat and back covers. the back foam shall be contoured to provide lumbar support for enhanced comfort. the chair dimensions shall be approximately 45 cm (w) x 38 cm (h) for the back, and 45 cm (w) x 43 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the armrests and legs shall be fabricated from powder-coated mild steel (ms) structure as per architect's selection. the seat and back shall be securely fixed to the ms structure using all necessary hardware. it shall be confirmed and approved in advance by

Louver Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government