Latest louver scrap Tenders | Government louver scrap Tenders

CTN :45475408

22 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For rate contract for supply of electric material(ht/lt) t&p/equipments/hardware items etc.for std udhampur -balance items. note :the bidders are advised to quote the reasonable rates for supply of all the items mentioned in boq. any rate quoted as zero shall be assumed that the firm is unwilling to supply the particular item and next lowest rate shall be considered as l1 for that particular item. - xlpe power cable (make havells or any other reputed make conforming to relevant is specifications) :, 11 kv single-core xlpe armoured cable 630 mm2, 11 kv 3-core xlpe armoured cable 185 mm2, twin core al lt cable 16 mm2 pvc cable (al), lt xlpe al cable 3.5 core armoured x95 sqmm (3 x 95 + 1 x 70 + 1 x 16), 33 kv cable termination kits outdoor (make havells or any other reputed make conforming to relevant is specifications) :, cable termination kits 33 kv heat shrinkable outdoor type 300 mm2 (single core), 33 kv cable termination kits heat shrinkable 300 sqmm -3 core, 33 kv cable termination kits heat shrinkable 240 sqmm -3 core, 33 kv cable termination kits heat shrinkable 185 sqmm -3 core, 11 kv cable termination kits outdoor/indoor (make havells or any other reputed make conforming to relevant is specifications), a)cable kits 11 kv heat shrinkable indoor 630 mm2 (single core), b) cable kits 11 kv heat shrinkable indoor 400 mm2- 3 core, c) cable kits 11 kv heat shrinkable indoor 300 mm2 - 3 core, d) cable kits 11 kv heat shrinkable indoor 240 mm- 3 core, e) cable kits 11 kv heat shrinkable indoor 185mm2 - 3 core, f) cable kits 11 kv heat shrinkable indoor 120 mm2 - 3 core, g) cable kits 11 kv heat shrinkable outdoor 630 mm2 - 1 core, i)cable kits 11 kv heat shrinkable outdoor 400 mm2 - 3 core, j) cable kits 11 kv heat shrinkable outdoor 240 mm2- 3 core, k) cable kits 11 kv heat shrinkable outdoor 185 mm2- 3 core, l) cable kits 11 kv heat shrinkable outdoor 120 mm2- 3 core, 11 kv straight through joints, 11 kv cable straight through joints heat shrinkable 240 sqmm - 3 core, 11 kv cable straight through joints heat shrinkable 185 sqmm - 3 core, e)11 kv cable straight through joints heat shrinkable 120 sqmm - 3 core, control cable, a) 2.5 mm2 cu 2-core, b) 2.5 mm2 cu 4-core, c) 2.5 mm2 cu 6-core, d) 2.5 mm2 cu 8-core, e) 2.5 mm2 cu 10-core, f) 2.5 mm2 cu 12-core, g) 2.5 mm2 cu 16-core, battery chargers & battery bank , maintenance free 32 v lead acid battery (vrla) bank comprising of 16 nos of 2 volt cells of 100 ah capacity make hbl, exide, amaraja etc, 32 v battery charger automatic (float & boost) compatible for vrla batteries, 3 phase, 415 v ac , 50 hz ,4 wire 36 v , 30-40 a, with 4 outgoing feeders and with all protections, 33 kv & 11 kv insulators make iec, bhel, rastriya, top line, tcpl or any other reputed make conforming to relevant is specification , 33 kv post insulator 24 mm, 11 kv guy insulator 90 x 65, 33 kv hardware fittings, 33 kv tension fittings for acsr dog conductor, t & c 3 u-bolts type (approx. 2.8 kg) al wt 400 gm, 33 kv suspension fittings for acsr dog conductor -( wt 1.8 kg), spares for 11 kv vcb panels, a) male / female contacts mei make, b) 11 kv pt fuse, c) 11 kv vcb bottle assembly bracket, d) shower contact mei make, e) shower contact crompton greaves make, spring charging dc motor for 11 kv vcb panel( make delco), tripping coil suitable for vcb panels (operating voltage 30-36 volt dc) with plunger, ampere meter 96mm x 96 mm for 11 kv vcb panel (digital), voltmeter 96mm x 96 mm for 11 kv vcb panel (digital), indicator lamp for vcb panel voltage 50-250 v ac/dc., tnc switch for 11 kv/ 33kv vcb panels, space heaters with thermostat for 11 kv vcb panels, 11 kv vacuum interupter bottle with makes, a) g.e., b) crompton greaves, c) allind, d) alstrom, e) bhel /a.b.b, master trip relay ashida (make) 18-52 (v), 11 kv cts resin cast of different ratios, make mei/ bicco lawrie / crompton greaves / bhel/ er/ ssg/ alstorm/ megawin/ sudhir/electricfield for 11 kv vcb panels(indoor/outdoor), i) 800/400/

Central Government/Public Sector

CTN :45299114

23 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of machining of 77 lines components with hal material e - setting , flng , flange , upper cover of labyrinth , boss , dog , casing of plug 3 stg , casing of plug 4 stg , boss , bush , pipe , adapter , cover , bracket , flange , flange , plug , block , block , block , nipple , bracket , cross piece , cross piece , spacer , flange , bush , casing , drive flange , eye bolt , suspension casing , rocker , ring , flange , ring of drive var inlet gdvane , ring of drive 1st stg , ring of drive 2nd stg , front ring , ring , flng , t-joint , t-joint , t-joint , t-joint , t-joint , t-joint , t-joint , t-joint , pipe connection , t-joint , union , union , union , t-joint , union , boss , boss , balancing weight , balancing load , balancing weight , angle plate , bush , bush , spring ring , tie rod , branch pipe , cross connection , sealing ring , elbow , pipe connection , piston , pin , piston , sealing ring , ii-stage strap , ring , casing

CTN :45468787

16 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For supply of radiator hose , oil filter element , wiper blade , suspension bush kit , air filter , oil filter , fuel filter , front wheel brg , injector nozzle , clutch rel brg , pressure plate , chain sprocket , oil filter re , side mirror , reverse light switch , pressure pipe , fuel pump motor , door mechanism rh , wiper blade with arms , tie rod assy , rear wiper arm , inter cooler mtg bracket , door latch with motor , front wiper blade , front hub brg , clutch plate , seat belt , head light led bulb

CTN :45467253

20 Jun, 2026 NA

Rajauri - Jammu And Kashmir

Tender For supply of indicator switch , brake shoe rear , grip handle dummy pvc , spark plug , bracket flasher unit , steering vane pump , ignition coil , clutch release bearing , suspension bush kit , universal joint , fly wheel assay , steering oil seal

State Government

CTN :45433596

19 Jun, 2026 1.40 Crore

Etah - Uttar Pradesh

Tender For supply of supply of stone pad , supply of ms top channel , supply of ms dropper channel , supply of ms t off channel , supply of lt clamp , supply of danger board , supply of prc connector , supply of i hook , supply of dead and clamp , supply of suspension clamp , supply of ms angle , supply of barbed wire , supply of f clamp , supply of number plate , supply of holding clamp , supply of double pole clamp , supply of e bracket , supply of henley type lailless unit , supply of lt pvc cable , supply of distribution box clamp , supply of clamp with nut and bolts , supply of allunimum lug 25 kva tf , supply of allunimum lug 63 kva tf , supply of allunimum lug 100 kva tf , supply of allunimum lug 250 kva tf , supply of allunimum lug 400 kva tf , safe carriage of pcc 8.5 m pole , safe carriage of st pole 9 m pole , safe carriage of st pole 11 m pole , safe carriage of 25 kva tf , safe carriage of 63 kva tf , safe carriage of 100 kva tf , safe carriage of 250 kva tf , safe carriage of 11 kv pin insulator , safe carriage of 11 kv disc insulator , safe carriage of 11 kv disc fitting , safe carriage of 11 kv fuse set , safe carriage of earthing , safe carriage of lt ab cable , safe carriage of lt xlpe cable , safe carriage of acsr weseal conductor , safe carriage of lt pvc armoud cabler , safe carriage of distribution box , safe carriage of stay set complete , erection of pcc pole 8.5 m single support , erection of st pole 11 m single support , erection of st pole 9 m single support , erection of pcc pole 8.5 m double pole , erection of st pole 11 m double pole , laying sagging of weseal conductor , laying sagging of lt ab cable , laying sagging of lt xlpe cable , laying sagging of lt pvc armoud cable , laying sagging of lt pvc cable , erection of plinth 250 kvatf , providing and installation of fancing , erection of pipe earthing , mounting of 25 kva tf , mounting of 63 kva tf , mounting of 100 kva tf , mounting of 250 kva tf , erection and grouting of stay , erection of stone pad , fixing of barbed wire , fxing of danger board , fxing of number plate , erection of earthing complete , erection of 3 phase distribution box , erection of dead end clamp , erection of prc connector , erection of 11 kv fuse set , erection and installation of lailless unit , received back material of 10 and 16 kva tf , received back material of 100 kva tf , received back material of lt ab cable

Central Government / Public Sector

CTN :45436725

29 Jun, 2026 NA

Mahabubnagar - Telangana

Tender For supply of catenary large suspension bracket (ri no. 2131 & 2132) with u bolt, nut and spring washer as per rdso spec. eti/ohe/p/2130-1, rev-c or latest. make/brand: rdso approved vendors accepted only. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45406848

23 Jun, 2026 NA

Damanjodi - Odisha

Tender For supply of 1 . 71150000490 seat kit assly. front suspension 958-su- 00015 , 2 . 71150000500 seat kit assly. front suspension 958-su-00023 , 3 . 71160001100 953hc00029 seal kit steering cylinder , 4 . 71150286800 bracket trans. filter pt.no.tz 5807bracket transmission filter tz5807 , 5 . 71150405450 damper vibration 955-tm- 02018damper vibration 955-tm-02018 engine mouting for 210m beml make dumper , 6 . 71160024320 985-pi- 61017 cushion trans bh100 , 7 . 71150313540 o ring pt.no. wa 0024o ring wa0024 , 8 . 71150308490 o ring pt.no.vn 9911o ring vn9911 , 9 . 71103210300 bolt - 1r7419cap screw tr7419 by 566201000130 , 10 . 71104856040 cap screw c1603cap screw 3 by 8 inch 16nc x 1.3 inch c-1603 with grade 10.4 , 11 . 71104898200 bolt cfs-01-11230bolt cfs-01-11230 , 12 . 71150011280 cap screw part no- cfb2621927 for beml make dumper model bh50m by 60m , 13 . 71150072840 bolt part no-cfb25-11332 for beml make dumper , 14 . 71150099020 cfb-25-11338 c by s 1 by 2 inch13nc 1 1 by 2 inch , 15 . 71150099100 cfb-25-21650 c by s hex head bolt , 16 . 71150099110 vc9049 c by s 5 by 16 inch 18nc 5 by 8 inch , 17 . 71150099120 cfb-26-11115 c by s 7 by 16 inch 14nc 4 1 by 2 inch , 18 . 71150099130 cfb-25- 11025 c by s 3 by 8 inch 16nc 1 inch , 19 . 71150099140 cfb-25-11645 c by s 5 by 8 inch 11nc 1 3 by 4 inch , 20 . 71150099150 cfb-25-11138 c by s 7 by 16 inch 14nc 1 1 by 2 inch , 21 . 71150099160 cfb-25-11020 c by s 3 by 8 inch 16nc 3 by 4 inch , 22 . 71150099180 cfb-01-21675 bolt m16x75 , 23 . 71150099190 cfb-25-11390 c by s 1 by 2 inch 13nc 3 1 by 2 inch , 24 . 71150099200 955-hs- 12551 c by s m6x30 , 25 . 71150099210 cfs-01-21065 c by s m10x65 , 26 . 71150099220 cfb-25-21025 c by s 3 by 8 inch 6nc 1 inch , 27 . 71150121000 cap screw pt.no.cfs-01-21240cap screw cfs01-21240 m12x40 with grade 10.4 , 28 . 71150121240 cap screw pt.no.cfs-01-21225cap screw cfs01-21225 m12x1.75x25 with grade 10.4 , 29 . 71150125550 cap screw cfs01-21025capscrew cfs-01-21025 m10x25 with grade 10.4 , 30 . 71150125790 cap screw cfs01- 21640m16x2x40 with grade 10.4 , 31 . 71150126670 cap screw cfb-25-11638capscrew cfb-25-11638 by c 1614 with 10.4 grdae , 32 . 71150129240 cs 3 by 4 inch 10nc x 2 inch cfb-25-219503 by 4 inch 10nc 2 inch long , 33 . 71150286590 universal joint assy. rear pt.no.pb7786universal joint assembly rear pb 7786 u.j.assembly between transmission and diff erential , 34 . 71150307440 cap screw pt.no.vn 9170cap screw vn9170 with nut 3 by 4 inch 10nc 5 1 by 2 inch long with nut grade10.4 , 35 . 71150420150 cap screw vn- 9075capscrew vn9075 10.4ht 1 by 2inchx13ncx2 1 by 4 inch long , 36 . 71150423340 cap screw vn 9076capscrew vn 9076 5 by 8 inch 11 nc 1 1 by 4 inch with 10.4 grad , 37 . 71150423650 capscorw vn 9078cap screw vn 9078 7 by 8 inch 9 nc 2 1 by 4 inch with 10.4 grade , 38 . 71150424460 cs 3 by 8 inch 16nc x 11 by 4 inch vf-8831 , 39 . 71150440110 cap screw 3 by 8 inch 16nc x 3.5 inch cfb-25-11090 by h9917 , 40 . 71150440660 cap screw m10x1.5x20 cfs-01-31020 , 41 . 71160021550 5814313410 air cylinder assembly //bid details 2 / 33

CTN :45405773

02 Jul, 2026 NA

Adra - West Bengal

Tender For supply of large catenary suspension bracket complete set with all fasteners as per rdso drawingno. eti/ohe/p/2130 (rev-b) conforming to specification no. ti/spc/ohe/fittings/0130-10/13 (rev-1) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45388504

16 Jun, 2026 NA

Goa - Goa

Tender For supply of rangle cleat i-10 , butterfly nut m6.20 , butterfly nut m16.20 , back edge , stop , suspension with holder , suspension , holder , chain , dowel 10 , bracket

CTN :45385129

01 Jul, 2026 NA

Ludhiana - Punjab

Tender For supply of hotline tools for live line maintenance upto 400kv substations and transmission lines of pstcl - line man tool bag, ehv trough-design insulator cradle assembly, swivel boom assembly including bases, mast and side poles, spliced heavy duty hook ladders assembly(top, middle and bottom section), attachment for ladder assembly includes required swivel sticks- 8 nos, spreader bar-2 nos, ladder clamp- 5nos, double clamp- 2nos, vertical and horizontal ladder bases each one., platform ladders, universal pole of minimum length of, i) 2.4meter, ii) 3.0meter, iii) 3.6meter, iv) 4.2meter, insulated wire tongs/ spliced wire tongs of minimum length of, i) 3.6m including wire tong bands, ii) 4.8m including wire tong bands, insulated strain link stick of minimum length of, i) 3.0meter, ii) 3.6meter, insulated swivel stick of minimum length 2.4m, 3.0m and 3.5m, i) 2.4meter, ii) 3.0meter, iii) 3.5meter, trolley pole suspension insulator tool, insulated static ground, insulated telescopic hot stick:, all angle cog wrench, i) 3.0meter, ii) 3.6meter, scaffold system up to 15 meters, universal tool kit consist of pin holder, cutout tool ratchet wrench, cotter key remover, locating pin, ball socket adjuster, screw driver, clear vision mirror, shepherd hook, wrench head, insulator fork, spiral disconnect, cotter key tool, universal adopter, ball socket cotter key remover, clevis pin installer, knocker, ball socket adjuster, chuck blank, cotter key installing tool, hacksaw and all angle plier, bypass clamp, i) tower type wire tong saddle, ii) tower type saddle with extensions, pole clamps, nylon rope blocks with 45 meter long, 12mm composite fiber braided rope, tool hanger & clamp, live line tools racks, grip-all clamp stick assist ring, swivel hook ladder, ratchet wrench including hex socket sets, tool bucket, composite fiber braided rope of 180 meter length:, i) 10mm, ii) 12mm, iii) 20mm, poly dacron rope 16mm, polypropylene rope 12mm, conductive suits, i) medium (set of pant and shirt), ii) large (set of pant and shirt), iii) extra large (set of pant and shirt), conductive gloves with bags, conductive socks, conductive boots, i) size 7, ii) size 8, iii) size 9, iv) size 10, static belt, hot stick tester, hot clamp, ladder monitor kit, epoxiglass cleaning kit, dry film lubricant, snatch block with forged steel hook, snatch block with forged meat hook, snatch block of 1000kg capacity:, fall arrester, full body harness, i) medium sizes, ii) large sizes, hand operated ratchet hoist- 1.0 ton, hand operated ratchet hoist 1.5 ton, hand operated ratchet hoist 2.0 ton, hand operated ratchet hoist 3.0 ton, double ply polyester webbing slings, 24mm x 900mm length, 24mm x 1800mm length, double ply polyester webbing slings, 45mm x 900mm, 45mm x 1800mm, tarpaulin - 3600mm x 3600mm, d-shackle/ anchor shackle, i) 1t capacity, ii) 3t capacity, iii) 5 t capacity, all angle approach stick, i) 3.0meter, ii) 3.6meter, hand line hook, tower mounting bracket, total freight & insurance charges in rs.

Louver Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government And Public Sector

Central Government/Public Sector