Get complete information related to latest Lt Bus Bar Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lt Bus Bar Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lt Bus Bar Tenders.
Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door ltbusbar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium busbar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old busbar panel all as specified and directed by engr-in charge.notes:-(a) aluminium busbar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in busbar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc
Tender For supply of modernization of distribution infra 2x400 kva substation companybagh b b -dismantling and refurbishing of electrical distribution system , itc of existing load bank with static meter , itc of existing load bank , trimming and pruning of four trees , transportation of one dismantled lt panel darbhanga to mzp , removing of old faulty outlived mv panel , provision of structural iron channels mounting framework for the lt panel , re-furbishment of existing mv panel , brickwork for minor structural alterations near the lt panel support base , straight through joint 185 , straight through joint 50 , removing and relaying of existing cement interlocking bricks , laying of 1.1 kv grade of 35 sqmm to 185 sqmm direct in ground , dressing of cables , finishing of the ltbusbar box , 20w surface-mounted led tube light , a. horizontal type tpn db 8 way with double door , b. horizontal type tpn db 8 way single door , a. vertical type, 415 v, tpn db 8 way double door , dressing of dbs , a. single pole mcb 6 to 32 a , b. four pole isolator 63 a , c. four pole isolator 40 a , d. double pole isolator 40 a , e. tp mcb 63 a , f. 125 a tp mccb 16 ka , 3 pole mccb of 250a, 25 ka , itc of existing ltbusbar box , sitc wall mounted heavy-duty air circulators fans of 600mm metal blades , supplying and fixing of 5mm thick m.s.chequered plates , fixing of ms stand of pac outdoor unit , providing double coat spray painting , sign writting numbering on all panel proper marking of its connectivity , a. wiring for light point group-a , a. copper conductor, single core cable 2 x 1.5 sq. mm , a. medium class pvc conduit 20 mm , shifting re- installation of submersible pump staters , making opening of wall to suit the size of 380 mm sweep exhaust fan , supplying fixing of exhaust fan of 380 mm sweep heavy duty , a. blanking plate , b. 5 pin 15 a socket , c. 15 16 a piano type switch , d. 5 6 a piano type switch , e. 3 pin 5 6 a socket outlet , f. 3 pin 15 a top , g. wall fan , h. down rod for ceiling fan installation 3 ft length hook , a. 100 watt flood light , b. 24 w led rimless surface panel light , sitc of 100 a 3 phase neutral copper busbar in sheet steel enclosure , dressing of existing distribution system of type ii staff qtr , itc of 100 a 3 phase neutral busbar with 100 a mccb in sheet steel enclosure , supplying fixing of double pole spn mcb 32 a in the sheet steel enclosure , s l 2 1.5 sqmm copper conductor , removing the faulty lt cable of size 3.5 core 240 sq.mm , ms clamp on four pole structure for fixing the ht cable , extracting of spare main ht cable 11 kv 95 sq mm size from the soil , extracting of faulty spare ht cable 95 sq mm from the duct manual labour , fastners nut bolt, al lugs, socket, cu lugs socket, washers, screw, pvc clips , acrylic sheet of 2 mm thickness , hrc fuse of 200 a //bid details 2 / 49
Tender For auction sale of depot non ferrous scrap - lot no.p.nfc-1.bin no- 7.exmp.06.2026-27.08 description- scrap copper lump & sheets (comprising of fire bronze pieces, plats, stays, rivets, stude, rods, pipe etc) copper wire without insulation. copper boring & turning. our offer:- scrap copper miscellaneousllaneous with or without iron attachment. such as- rt dropper clip, catenery clip,contact tips for cgr (only copper), contact liver for cgr, busbar, copper boring, plier, flexible shunt and mobile contact, scrap copper pipe,transformer oil cooler tube, rectifier busbar , loop copper pipe, loader unloader pipe for a/c, half round oval contact copper, finger contact, stud bolt, copper ferule, carbon brush copper pigtail, copper tube, blow out coil for line contactor, r b shunt, shunt for armeter, blow out coil for shunting contactor, battery isolation switch, copper connecting angle, copper briddle wire, ptfe neutral section runner, section insulator runner, copper tubular terminal, discharge valve, copper socket, set of electrode & nozzle & other copper miscellaneousllaneous in bin no-7. qty=3686 kgs. loading will be done by purchaser's own arrangement.
Tender For auction sale of others - scrap non ferros brass items consiste of defective & worn out smgr, pipeline adapter, plunger, coupling vcb gauge, smgr cylinder cap, mg/6/6 valve, mg 4/4 valve, connection rod, control block, gun metal valve, aluminium busbar )n type, o type, p type) connection link, arching horn, phge middle piece, phgr cylinder, smgr cylinder top cap, defective worn out isolating 3 way cock hom, three way ball valve acb dj part, clamp for terminal base & brush holder for hitachi tm, brush holder insulator for hitachi tm, smgr pipeline, smgr cylinderical cover, smgr piston rod, rps fuse putti, rps fuse link patti, hrc fuse 100 amp link, hrc fuse side link, hrc fuse side plate, strainer, legris cock, wsm tank, smgr push rod, hom isolating cock, rps fuse, mph impeller, cp safty valve, pantograph push rod end & differents brass part of equipment with or without ms attachment released from ac loco. weight= 1.571 mts (brass= 1.4544 mts, copper= 0.0234 mts, ferrous= 0.092 mts, insulation= 0.0017 mts). for custodian information ss-11 no. nkj/trs/scf/26-27/10 dt. 01.06.2026. ds-8 note no. 020725 dt. 01.06.2026. mode of delivery by actual weight only. (remark- 1. sale condition "as is where is basis" & uniform sale condition for e-auction is applicable. 2. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.)
Tender For corrigendum : procurement of maint items - led 07 watt lamp b 22 base , led 12 watt lamp b 22 base , led bulb 14 or 15 watt b22 base , led 5 watt b 22 base lamp , led highway flood light with high luminous efficiency input power 150 watt , led street light 60 watt 240 volt ip 66 , led street light 30 or 36 watt 240 volt ip 66 , led post top lanten 40 or 45 watt 240 volt ip 66 50 hz , led highway flood light with high luminous 80 or 90 watt 240 volt ip 66 , led flood light 160 watt 50 hz 240 volt , led round ceiling 8 or 10 watt down light , led round ceiling 12 watt down light , led flood light 60 watt , led street light 90 watt , ledz inverter batten 20 watt cdl 1800 lumen , led cob downlight 100l watt 6 watt , led cob downlight 100l watt 12 watt , ledz inverter lamps 9 watt 900lm and back up lumen of 300 lm , led facade light 120 watt , led pannel light 4x1 feet 36 or 40 watt , led aviation light 10 or 12 watt , suspended type led light 1 x 60 w , flame proof led light 1 x 20 w , industrial type recessed mounted 45 watt led light , mcb sp 10 amps c curve , mcb sp 16 amps c curve , mcb sp 20 amps c curve , mcb sp 6 amps c curve , mcb spn 10 amps c curve , mcb spn 16 amps c curve , mcb spn 20 amps c curve , mcb spn 32 amps c curve , mcb spn 40 amps c curve , mcb spn 63 amps c curve , mcb tpn 32 amps c curve , mcb tpn 63 amps c curve , mccb 250 amps 36 ka 4 pole , mccb 400 amps 36 ka 4 pole with spreader link , mccb 100 amps 415 volts 4 pole 16 ka , mccb 125 amps 4 pole 16 ka , mccb 200 amps 4 pole 415 volts 36 kva , mccb 63 amps 4 pole 415 volts 16 ka , mccb 160 amps 4 pole 415 volt 25 ka , mccb 4 pole 320 amps 415 volt 50 hz , mcb sp 06 amps 10ka b curve , mcb sp 16 amps 10ka b curve , mcb sp 20 amps 10ka b curve , mcb sp 25 amps 10ka b curve , mcb sp 40 amps 10ka b curve , mcb sp 63 amps 10 ka b curve , mcb dp 10 amps 10ka b curve , mcb dp 16 amps 10ka b curve , mcb dp 20 amps 10ka b curve , mcb dp 32 amps 10ka b curve , mcb dp 40 amps 10ka b curve , mcb four pole 32 amps 10ka b curve , mcb four pole 63 amps 10ka b curve , angular holder backlite 5 or 6 amps , aparture plate with 6 hole for geyser of capacity 25 or 50 ltr , aparture plate with 9 hole for geyser of capacity 25 or 50 ltr , busbar chamber 63 amps 4 pole 415 volts ac , busbar chamber 200 amps 4 pole 415 volts ac , cable frls pvc insulated sheathed with aluminium conductor 1100v 2 core x 6 sqmm , cable frls pvc insulated sheathed with aluminium conductor 1100v 2 core x 10sqmm , cable frls pvc insulated with copper conductor 1100v single core x 1.5 sqmm , cable frls cable pvc insulated with copper conductor 1100v single core 2.5 sqmm , call bell buzzar 2 amps , capacitor for ceiling fan 2.5 mfd oil type , ceiling fan rubber insulator small , chlorine testing kit with all testing fitments ot solution in rexene box , compression type aluminium lugs suitable for 120 sqmm , compression type aluminium lugs suitable for 16 sqmm , compression type aluminium lugs suitable for 25sqmm , compression type aluminium lugs suitable for 35sqmm , compression type aluminium lugs suitable for 50 sqmm , compression type aluminium lugs suitable for 70 sqmm , compression type aluminium lugs suitable for 95 sqmm , connection pipe for geyser 15 x 600 mm , copper sulphate cuso4-5.h2o chemical for busting the copper earth pit , cp push cock 15 mm heavy duty outter thrade type , cp pull cock 15 mm heavy duty outter thrade type , fuse wire tinned copper 60 and 100 amps 200 gm per roll each 1 kg , fuse wire tinned copper 30 and 40 amps 200 gm per roll each 2 kg , gric compound for earthing boosting compound , heating element for geyser trangular type 2 kw , heating element for geyser 1.5 kw clamp type , hdt bitumen tape self adhesive 25 mm 5 mtr roll , thermostat for geyser 25 litre 2 kw , modular fan regulator for harmfree 0-4 step 2 modolar , modular switch 16 amps 3 pin 230 volt , modular socket 6 or 16 amps 2 modolar , modular socket shutterd 6 or 16 amps 3 modolar , modular shocket 6 a
Tender For corrigendum : repairs/ replacement ltbusbar, lt cable, flame proof wirings, fittings and connected items and repairs of electric supply installaton and sinage board including painting work at wellington station under ge wellington
Tender For corrigendum : repair/maint of ltbusbar trunking network of electric infrastructure and connected accessories at chnc under ge (utilities) udhampur
Tender For auction sale of depot miscellaneous scrap - scrap and unserviceable condenmed electrical fitting item such as dbr (dymamic braking resistor) grid set box with copper busbar, shorting plates and connection plate for bar with or without clamps in dismenteled and broken condition with different types of attachment such as copper, nickel, chromium and insulations etc. (qty approx)
Tender For auction sale of depot miscellaneous scrap - scrap and unserviceable condenmed electrical fitting item such as dbr (dymamic braking resistor) grid set box with copper busbar, shorting plates and connection plate for bar with or without clamps in dismenteled and broken condition with different types of attachment such as copper, nickel, chromium and insulations etc. (qty approx)