Web Analytics Made Easy - StatCounter

Lt Module Tenders

Get complete information related to latest Lt Module Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lt Module Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lt Module Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45727898 Due date: 07 Jul, 202607 Jul, 2026 NA
Tender For corrigendum : supply of modified terminal board assembly common for 4.5kw/ 25kw, 110v alternator conf. to rdso drg no. rdso/pe/sk/ac/0047 -2003 (rev -4). [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45741797 Due date: 08 Jul, 202608 Jul, 2026 NA
Tender For supply of spares components to earth leakage detector of anuvidyuth make. the set consists: 1. meter module (main card, insulation tester and panel meter), 2. channel module (channel card fittedwith accessories), 3. main module for add-on units, 4. channel card, 5. mains cards, 6. cable cards, 7. mother board, 8. panel meters, 9. transformer xr-273-3, 10. transformer xr-243-n1, 11. transformer xr-355, 12. terminal strips channel/mains, 13. display card, 14. test leads redx2+green, 15. frc connector for meter reading, 16. relay 4 change over, 17. multi turn pot 20k (mt), 18. reset switch mpu-2, 19. dc buzzer, 20. rotary switch, 21. euro9 connector 32 pin, 22. euro connector 48 pin and 23. 1m potentio meter for main module. firms offer: make/model: anu vidyut [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736160 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For supply of motor protection circuit breaker (mpcb) for water pump with auxiliary contact (1 no + 1nc)and terminal block db, current rating: 1-1.6 amp,thermal release range :1.0 to 1.6 a, voltage rating 690 v, class 10, breaking capacity: 50 ka, 3 pole as per rdso spec no: rdso/pe/spec/0192-2018 (rev.1) or latest. suitable for use in switch board cabinet of lhb type ac coaches. make: abb/schneider/siemens/l&t. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45604809 Due date: 07 Jul, 202607 Jul, 2026 NA
Tender For corrigendum : supply and end termination of over load current protection system along with full end termination suitable for overload and short circuit protection along with miniature circuit breaker distribution board with eight way mcb capacity 415 with busbar rating 200a v, c type rated sc capacity 10ka confirming tois: 13032:1991 latest with housing powder coating siemens grey-7035 with bimetallic terminal connector suitable for 16 dia aluminium tubular busbar for 32a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 16 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed todesignation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45743942 Due date: 07 Jul, 202607 Jul, 2026 NA
Tender For supply and end termination of over load current protection system along with full end termination suitable for overload and short circuit protection along with miniature circuit breaker distribution board with eight way mcb capacity 415 with busbar rating 200a v, c type rated sc capacity 10ka confirming tois: 13032:1991 latest with housing powder coating siemens grey-7035 with bimetallic terminal connector suitable for 16 dia aluminium tubular busbar for 32a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 16 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed todesignation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45730369 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For providing and fixing following rating and breaking capacity mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel. making connections. etc. as required. 250 amp, 50 ka

Central Government/Public Sector

CTN :45711072 Due date: 20 Jul, 202620 Jul, 2026 36.87 Lacs
Tender For special repair to dbs sub main wiring and miscellaneous items at mh and central institute at old amritsar cantt - taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed., material and labour for point wiring in existing conduit for following point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn through and existing pvc concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) complete all as specified and as directed. note : 1 switch, socket, regulator, bell, ceiling rose, regulator, lamp holder will be measured and paid separately.a) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pin socket outlet 5 amps independent board., c) for one three pin 5 amps socket outlet on the same board with other switch, d) for one light point controlled by two way switch, all a per item no 2 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper multi stranded conductor connecting to common earth dolly complete all as specified and directed., material and labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn and including surface pvc conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc by using cement mortar (1:3) complete all as specified and as directed. note : 1. switche, socket, regulator, ceiling rose, bell, lamp holder will be measured and paid separatelya) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pin socket outlet 5 amps independent board, c) for one three pin 5 amps socket outlet on the same board with other switches, d) for one light point controlled by two way switch, all a per item no 7 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper solid conductor connecting to common earth dolly complete all as sp

Central Government/Public Sector

CTN :45492541 Due date: 10 Jul, 202610 Jul, 2026 3.16 Crore
Tender For corrigendum : tender for supply of fids and 05 years camc at srinagar airport : - supply of 3 x 2 mtrs. or higher true colour led display board with stainless steel floor ceiling wall mounting arrangement. , supply of 65 inch led display with floorceiling wall mounts as per the specifications , supply of 55 inch led display with floor ceiling wall mounts as per the specifications , supply of 43 inch led display with floor ceiling wall mounts as per the specifications , supply of fids servers to work as main and standby set of two servers with accessories as per the tender specifications. , supply of data entry terminal client desktop pc with all accessories as per the tender specifications. , supply of ntp server with accessories as per tender specifications. , supply of licensed operating system server level with support for all servers , supply of operating system at client level pc work station etc. with support for all clients , supply of licensed antivirus server level with support for all servers , supply of licensed antivirus client level with support for all servers , supply of layer 3 network switch as per technical specifications and accessories with rack , patch panel , liu and other accessories , supply of layer 2 network switch as per technical specifications and accessories with rack , patch panel , liu and other accessories , supply of 12v 84ah battery for the 2x 20kva ups of make numeric hp max. the cost of old batteries connected to ups shall be considerd while qouting and shall be handed over to contractor as buy back. , supply of fids package software as per requirement of the tender , supply of 8 port kvm switch. , supply and laying of 25 mm dia , 16 swg isi marked pvc conduit with accessories as required , supply and laying of 3 core 6 sq mm multi strand copper conductor pvc insulated pvc sheathed armoured power cable on wall surface tray with accessories as required , supply and laying of 3 core 1.5 sq mm multistrand copper conductor pvc insulated pvc sheathed unarmoured power cable in existing conduit tray with accessories as required , supply and laying of 6 core smf ofc unarmoured cable on wall surface tray with accessories as required , supply and laying of utp cat 6 cable in existing conduit tray with accessories including termination with wall surface mount box as required , supply of power distribution panel complete as per specifications for flds system. , excavation soft digging back filling as per site requirement , supply of rj45 io face plate gang boxback box with standard length of patch cable for fid system as per site requirement and specifications , training and documentation as per tender , charges for installation testing and commissioning of the complete system including integration of existing 24 nos , cids with new fids system.

Central Government/Public Sector

CTN :45478077 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For corrigendum : tender for supply of 84 types of mechanical parts and assemblies - heat sink copper rod hal-1311-dia20-1 , base , cover , frame , cap , cap , cap , mounting tray , heat sink , heat sink , contact , glass panel , pcb , body , cover , base , pcb , bracket , bracket , bracket , support , insert , bush , bush , clamp , plate , heat sink , heat sink , heat sink , screw , nut , locking handle , plate , terminal , cover , housing , plug , clamp , sleeve , pcb , pcb , pcb-gtb , bush , column , bush , shaft , screw , screw , nut , frame , frame , cover , cover , cover , panel , panel , terminal , bracket , base , base , panel , panel , plate , flange , board , panel , panel , heat sink , column , frame , frame , frame , panel , panel , cover plate , body , body , panel , panel , panel , panel , panel , panel , cover

Central Government/Public Sector

CTN :45380749 Due date: 06 Jul, 202606 Jul, 2026 NA
Tender For corrigendum : supply of lateral stopper plate(plate std-ms 75x75 thickness-16mm) for weigh-bridge machine, make: tulaman, erwb , mounting plates (200x200) std-ms is suitable for weigh- bridge machine, make: tulaman, model: erwb , top plate size(190x100x18 -04 nos) ms is suitable for weigh-bridge machine, make: tulaman, model: erwb , intelligent terminal - it5573-066 (along with jumbo display & key board glcd-analog) make: tulaman , loadcell 30t-lc610- 105 (cup & ball-analog) is suitable for weigh-bridge machine, make: tulaman , topcup 30t atc310-079 (std- ms 75 dia length-25) is suitable for weigh-bridge machine, make: tulaman, , bottom plate (std-ms 130x140 thickness- 20mm) is suitable for weigh-bridge machine, make: tulaman , dummy loadcells (std-ms height-224mm dia- 50mm plate: 125x135 thickness-8mm) make: tulaman, model: erwb , clamping plate (std-ms length-190 width- 100 thickness-16mm) for weigh-bridge machine, make: tulaman , wb hardware (m30x130lg bolt - 4 nos, 30mm nuts-4 nos, spring washer- 4 nos, plain washers -4 nos) , longitudinal stopper (ms) is suitable for weigh-bridge machine, make: tulaman, model: erwb , junction box - jbpcbwb-075 (jb-04-analog along with metal box) for weigh-bridge machine, make: tulaman , lateral stopper plate (assembly-std ms 50x25) for weigh-bridge machine, make: tulaman, model: erwb , service charges
 Loading, Please wait...

Connect us via What's Up