Latest lt protection kit scrap Tenders | Government lt protection kit scrap Tenders

State Government

CTN :45399727

12 Jun, 2026 78.47 Lacs

Belagavi - Karnataka

Tender For providing consultancy services for preparation of structural design and design drawings with all necessary soil investigations for all services including all allied works of proposed construction of elevated corridor/grade separator in belagavi city - phase ii extending from kittur rani chennamma circle to dharmveer sambhaji circle, including connecting ramps. including all the components of electrical services, utility shifting, signal shifting and land acquisition etc., including proof checking of design and design drawings from iits or iisc and also consultant to prepare revised drawings and get approval from competent authority if any changes occur during execution of the project and also assist in finalization of dts as per the instructions of engineer in charge.(inclusive of consultancy service taxes, local taxes, duties, fees, levies and other impositions imposed under the applicable law on the consultants but excluding gst charges)

corporations/Associations/Others

CTN :45295700

08 Jun, 2026 NA

Kanyakumari - Tamil Nadu

Tender For supply of lt 2 wire spiral phase separator

Central Government/Public Sector

CTN :45296160

01 Jun, 2026 NA

Jalandhar - Punjab

Tender For supply of compressor oil , split ac valve , 3 phase monitoring relay , fuel water separator assy , emergency eng fuel tank plate , relay , ac to dc converter , capacitor 2.5 mfd

corporations/Associations/Others

CTN :45164169

26 May, 2026 NA

Villupuram - Tamil Nadu

Tender For supply of lt three phase four wire line separator and lt single phase two wire line separator

Central Government/Public Sector

CTN :45210844

08 Jun, 2026 NA

Hubli - Karnataka

Tender For supply of main air compressor (air generation and treatment unit, oil free along with modular mounting frame assembled with 3 phase induction motor, cooler unit, air dryer, moisture separator & other accessories) suitable for 25kv 3 phase ac memu (medha) icf rakes. free air delivery at 7 bar = 1400 lpm, electrical power consumption at 7 bar (input power) = 15kw. make/models: m/s. faively transport (model no. ft0052441-103-e00mum or latest), elgi (part no: s07116 for ac memu- rr20070 of with dry air) or equivalent. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45104682

12 May, 2026 NA

Bangalore - Karnataka

Tender For magnetic drum separator (double stage type) conforming to model/part no. efe-rwf-md-00 of electro flux equipments pvt ltd or model/part no. pml-917134510 of permanent magnet ltd or model/part no. bmx-369/1 of wesman engineering company pvt ltd, with the following specifications: technical specifications: 1. type of magnet: high power high gradient rare earth magnet (nd-fe-b) 2. magnet grade: n50 3. magnetic strength: minimum 3000-3500 gauss or higher at drum surface 4. maximum operating temperature: 80 deg c 5. separation efficiency: minimum 90% (preferably up to 95% or above) 6. drum material: stainless steel (ss) 7. drum diameter: 300 mm 8. drum width: 600 mm 9. number of drums: double10. drum surface hardness: 500-700 vickers drive system: 11) geared motor: 1.0 hp x 2 nos, 1440 rpm, 415v +/- 10%, 50 hz, 3 phase, continuous duty (s1), insulation class f or better 12) make of geared motor: premium make such as sew / bonfiglioli / nord or equivalent make 13) drive type: v-belt and pulley note: the supply consists of 1.complete unit with base frame, guards, fasteners and all accessories required forinstallation 2.suitable for continuous heavy-duty industrial operation 3. proper sealing arrangement to prevent dust ingress 4. anti-corrosive painting (except ss parts) 5. nameplate indicating model, serial number, year of manufacture and technical details (a) the bearings should be procured from authorised dealers and should be of skf/fag/ntn / timken / ina make only. (b) the firm should furnish bearing inspection certificate from manufacturers or their authorised testing agents along with the supply. (c) magnet strength certificate (gauss report) from manufacturer or nabl accredited lab to be furnished along with the supply. (d) material test certificate (mtc) for drum from nabl accredited lab to be furnished along with the supply. (e) warranty: warranty shall be 18 months from date of supply or 12 months from commissioning, whichever is earlier. (f) makes : electro flux / wesman / permanent magnet ltd only. [ warranty period: 18 months after the date of delivery ]

Central Government And Public Sector

CTN :44993073

12 May, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : magnetic drum separator (double stage type) conforming to model/part no. efe-rwf-md-00 of electro flux equipments pvt ltd or model/part no. pml-917134510 of permanent magnet ltd or model/part no. bmx-369/1 of wesman engineering company pvt ltd, with the following specifications: technical specifications: 1. type of magnet: high power high gradient rare earth magnet (nd-fe-b) 2. magnet grade: n50 3. magnetic strength: minimum 3000-3500 gauss or higher at drum surface 4. maximum operating temperature: 80 deg c 5. separation efficiency: minimum 90% (preferably up to 95% or above) 6. drum material: stainless steel (ss) 7. drum diameter: 300 mm 8. drum width: 600 mm 9. number of drums: double10. drum surface hardness: 500-700 vickers drive system: 11) geared motor: 1.0 hp x 2 nos, 1440 rpm, 415v +/- 10%, 50 hz, 3 phase, continuous duty (s1), insulation class f or better 12) make of geared motor: premium make such as sew / bonfiglioli / nord or equivalent make 13) drive type: v-belt and pulley note: the supply consists of 1.complete unit with base frame, guards, fasteners and all accessories required forinstallation 2.suitable for continuous heavy-duty industrial operation 3. proper sealing arrangement to prevent dust ingress 4. anti-corrosive painting (except ss parts) 5. nameplate indicating model, serial number, year of manufacture and technical details (a) the bearings should be procured from authorised dealers and should be of skf/fag/ntn / timken / ina make only. (b) the firm should furnish bearing inspection certificate from manufacturers or their authorised testing agents along with the supply. (c) magnet strength certificate (gauss report) from manufacturer or nabl accredited lab to be furnished along with the supply. (d) material test certificate (mtc) for drum from nabl accredited lab to be furnished along with the supply. (e) warranty: warranty shall be 18 months from date of supply or 12 months from commissioning, whichever is earlier. (f) makes : electro flux / wesman / permanent magnet ltd only. [ warranty period: 18 months after the date of delivery ]

Central Government And Public Sector

CTN :44993074

06 May, 2026 NA

Bangalore - Karnataka

Tender For gyratory vibrating screen separator (3-5 tph) for tsrp to model no/part no-sgs72-a2d of m/s galaxy sivtek or model/part no-ef-rwf-gs-00 of m/s electroflux or model/part no-mg 74 of m/s star trace to following specifications: a) technical specification for screen separtaor: 1) type: gyratory, 2) material: sand and foundry waste, 3) type of material: dry, 4) bulk density: 800-1250kg/m3, 5) percentage of moisture: dry, 6) flow rate: 3 to 5 tph, 7) type of feed: continuous, 8) moc of deck: mild steel, 9) no of deck: double, 10) moc of screen/mesh cloth: stainless steel - ss316, 11) no of mesh: two, 12) mesh size: 20 astm mesh on top and 50 astm on bottom deck, 13) moc of base drum with plate: mild steel (non contact part). b)specification for vibratory motor: 1) power: 5.0 hp, 2) phase: three phase, 3) voltage: 415 v ac, 4) connection: star, 5) frequency: 50hz, 6) insulation class: class 'f', 7) no of pole: 4, 8) speed: 1440 rpm, 9) duty: continuous (s1). note: i) mtc for mesh shall accompany the supply, ii) make: galaxy sivtek, electroflux, star trace only. [ warranty period: 18 months after the date of delivery ]

CTN :44805614

20 Apr, 2026 4.12 Lacs

Chatra - Jharkhand

Tender For providing and fixing of a phase separator in 100 span of overhead line to prevent unwanted short-circuiting caused by the clapping of conductors with the replacement of damaged insulators and cradle guard wires, including the fixing of an electrical

State Government

CTN :44740560

16 Apr, 2026 NA

Delhi - Delhi

Tender For supply of fmm filter (ph-2) p. no. 2258290009, make-chicago pneumatic , oil separator (chicago pneumatic) stock code 2903087100 of chicago pneumatic , phase sequence relay ph-2 p. no. 909523500 make-chicago pneumatic , clean oil(500ml pack) stock code of m/s chicago pneumatic is 9095954669 packing size= 500 ml

Lt Protection Kit Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors