Latest lugs Tenders | Government lugs Tenders

Central Government/Public Sector

CTN :45486962

06 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of set of panels to edts-355, rev-1, amd-1 to 6 (amendment-5 not applicable) without pump circuit switch gears i.e. mpcb & contactors mentioned at s.no. 36, 43 & 44 of bom of annexure-a (not required in the hv panel) for regular lhb nonac coaches. note: 1.low voltage panel shall be supplied as per rcf drg.no. cc-72445 alt-a orlatest and additional requirement, top & bottom cable entry holes & earthing lugs shall be provided as per icf drg.no icf/sk3-7-2-082 alt-nil or latest. 2.drg.no.ls71103 alt-a anx-1&2 shall be followed for door stopper arrangement and stiffner in hv panel. 3.drg.no.sked-646 icf anx-2 shall be followed for hv panel lh & rh side holes, wsp mounting holes & provision of poly-carbonate sheet. 4.the rbc cum ebc mcb's and its indication#s shall be provided in the hv & lv panels as per rdso modification sheet no. rdso/pe/ms/ac/0094-2024 (rev 0) and rdso/pe/ms/ac/0095-2024 (rev 0). 5.packing instruction: pi-115 ver 3.0. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45731851

14 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of traction transformer complete with cooling system & accessories like h.t cable along with protection shield in passenger compartment and under frame area, thermostat etc. related protection equipment and with safety chain arrangement including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mounting and earthing hardware and accessories including oil pump, oil cooling blowers etc. as per clause 4.1 rdso specification (one set per basic unit) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736160

09 Jul, 2026 NA

Prayagraj - Uttar Pradesh

Tender For supply of motor protection circuit breaker (mpcb) for water pump with auxiliary contact (1 no + 1nc)and terminal block db, current rating: 1-1.6 amp,thermal release range :1.0 to 1.6 a, voltage rating 690 v, class 10, breaking capacity: 50 ka, 3 pole as per rdso spec no: rdso/pe/spec/0192-2018 (rev.1) or latest. suitable for use in switch board cabinet of lhb type ac coaches. make: abb/schneider/siemens/l&t. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45721834

06 Jul, 2026 NA

Talegaon - Maharashtra

Tender For supplying electrical materials and repair maintenance services for street lights and electrical works at. grampanchayat somatane - electrical material, supplying and erecting modular type switch6a / 10a ., supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded ., providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia. with 4.5 x4.5 x3.65 mm thickness (5.60 + 2.7 + 2.7 m) length total 11 m long with pole cap, base plate in provided foundation ., supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in lengthalong with polecap of 300 mm length and 80 mm dia duly welded with provided leads as per specification, supplying,tpmcb 40a to 63a in provided distribution board, providing pair of duly tested rubber hand gloves as per is:4770 suitable for working upto 22kv supply., supplying and erecting insulated d.p. switch surface type/flush type 32a 240vwith indicator lamp & fuse, supplying h.c. pattern porcelain fuse bridge swith base & hc type fuse links240v 32a, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, 1.25 mm crca sheet metal enclosures with 20a., supplying pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper industrial cable ., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink ., supplying and erectingled street light fitting suitable for 26w to 36w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium ., supplying & laying pvc armoured cable 4core 6sq mm, supplying & laying pvc armoured cable 4core 10 sq mm, supplying & laying pvc armoured cable 2core 10 sq mm, supplying & laying pvc armoured cable 4core 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting), supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting), supplying, erecting & marking tpmcb 6 a to 32amp ., supplying, erecting & marking fpmcb 40a to 63a ., supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm., supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm., supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials., supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunk

Central Government/Public Sector

CTN :45731236

06 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For supply of auxiliary contact of type 19071, 2 oc, 6a, 220 - 240v for m/s. schneider electric make mcb model ng125. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45715772

20 Jul, 2026 NA

Thane - Maharashtra

Tender For supply of discrete components for assembly of 15 mv linac boards - thick film resistors - sdm 1/4 watt 1 kohms 1% commercial use, analog comparators dual comparator, common mode chokes/ filters 3a 4.5mh 80m ohm horizontal choke, high-performance 30-watt, isolated dc/dc converter, multilayer ceramic capacitors mlcc-smd/smt 50v 1000pf 0603 c0g 5%, diodes- general purpose, power, switching switching diode bvr & it := 100 v, multilayer ceramic capacitors mlcc- smd/smt 1.0uf 50volts x7r 5%, thick film resistors - smd 1/4watt 510ohms 5% high power aec-q200, trimmer resistors -smd 100k 10% 1/4"squ smt multiturn, power management specialised - pmic rms-dc converter ic low cost-pwr, rectifiers diode, do-41 , 1000v, 1a, standard leds - through hole green diffused 12 volt, fmcd 1,5/12-st-3,5 24 position terminal block plug, female sockets 0.138" (3.50mm) 180° free hanging (in-line), pluggable terminal blocks 12 pos 2.5mm pitch plug 26-20awg spring, pluggable terminal blocks ifmc1,5/10-st-3,5-rf, pluggable terminal blocks imcv 1,5/10-g-3 5 rn p20 thr, pluggable terminal blocks 4 pos 2.5mm pitch plug 26-20awg spring, mcdn 1,5/12-g1-3,5 p14thr 24 position terminal block header, male pins, shrouded (4 side) 0.138" (3.50mm) vertical through hole, 24 position terminal block header, male pins, shrouded (4 side) 0.138" (3.50mm) vertical through hole, pluggable terminal blocks imcv 1,5/10-g-3 5 p20 thr, 12 position terminal block header, male pins, shrouded (4 side) 0.098" (2.50mm) vertical through hole, 4 position terminal block header, male pins, shrouded (4 side) 0.098" (2.50mm) vertical through hole, 9 pin d type connector, 15 pin d type connector, esd protection diodes / tvs diodes 3kw 24v 5% bi-directional, 10mh pulse transformer 1:1 through hole, 1000pf, tol 1%, 500v, 2 pin jst-ph-2.0 male-female connector set of 2 (2mm pitch) , metal film resistors - through hole 2watts 2.2kohms 5%, headers & wire housings minifit rtc hdr 12p dr v tin .062, centralab rv4 series potentiometer 5000000.0 ohms. 2 watts. 500 volts.rv4laysa505b panel mount, solder lugs terminals, ca509/k5wht – 5 mm wide marker blank (1 pkt = 100 tags), diodes - general purpose, power, switching 100v io/200ma bulk, omron 4pdt non-latching relay plug in, 24v dc coil, 5 a, allied connector, plc unit ethernet connectorrj45 female socket ethernet connector with plastic shell ip67, 3-phase power connector (4 pin), radiall tnc(insulated) square flange jack receptacle with solder pot contact

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45738595

15 Jul, 2026 14.73 Lacs

Cuddapah - Andhra Pradesh

Tender For supply of supply of conventional lightning arrestors , supply of insulated multi stranded 75 sq.mm. copper wire with copper lugs , supply of frangible fiber-reinforced plastic frp poles , construction of concrete base for erecting frp poles , construction of conventional earthing pits , supply of copper plate , supply of copper strip , supply of pvc pipe for earth pits , supply of earthing salt , supply of charcoal granules , construction of earth pit inspection chamber , supply of metal signage board , brazing points , installation work

Co-operative

CTN :45715044

07 Jul, 2026 NA

Kawardha - Chhattisgarh

Tender For supply of re-engineering items (only oem & authorized dealers) - flexible cable copper conductor 1.1 kv grade1.5 squ mm multistrand copper wire, make- havells/polycab/kei, flexible cable copper conductor 1.1 kv grade 1 squ mm multistrand copper wire, make- havells/polycab/kei, flexible cable copper conductor 1.1 kv grade 2.5 squ mm multistrand copper wire, make- havells/polycab/kei, flexible cable copper conductor 1.1 kv grade 2.5 squ mm (flexible copper cable 3 core), make- havells/polycab/kei, flexible cable copper conductor 1.1 kv grade 1.5 squ mm (flexible copper cable 2 core), make- havells/polycab/kei, flexible cable copper conductor 1.1 kv grade 1.5 squ mm 3 core copper flexible cable, make- havells/polycab/kei, flexible cable copper conductor 1.1 kv grade 3 core flexible copper cable 4mm sq, make- havells/polycab/kei, flexible cable copper conductor 1.1 kv grade copper flexible multistrende lead size - 14 squ mm, make- havells/polycab/kei, armoured aluminium cable 1.1 kv grade 2.5 squ mm 2 core armoured aluminium cable, make- havells/polycab/kei, armoured aluminium cable 1.1 kv grade 2.5 squ mm 4 core armoured aluminium cable, make- havells/polycab/kei, armoured copper cable 1.1 kv grade 2.5 squ mm 2 core , make- havells/polycab/kei/finolex, armoured copper cable 1.1 kv grade 2.5 squ mm 3 core , make- havells/polycab/kei/finolex, armoured copper cable 1.1 kv grade 2.5 squ mm 16 core , make- havells/polycab/kei/finolex, armoured copper cable 1.1 kv grade 4 squ mm 6 core , make- havells/polycab/kei/finolex, armoured copper cable 1.1 kv grade 4 squ mm 7 core , make- havells/polycab/kei/finolex, "4mm 6 core armoured copper cablemake- havells/polycab/kei", armoured aluminium cable 1.1 kv grade 2.5 squ mm 3 core armoured aluminium cable, make- havells/polycab/kei, armoured aluminium cable 1.1 kv grade 4 squ mm 3 core armoured aluminium cable, make- havells/polycab/kei, armoured aluminium cable 1.1 kv grade 6 squ mm 3 core armoured aluminium cable, make- havells/polycab/kei, armoured aluminium cable 1.1 kv grade 10 squ mm 3 core armoured aluminium cable, make- havells/polycab/kei, armoured aluminium cable 1.1 kv grade 16 squ mm 3 core armoured aluminium cable, make- havells/polycab/kei, armoured aluminium cable 25 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 35 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 50 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 70 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 95 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 95 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 120 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 150 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 185 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 240 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 300 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 400 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 500 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 630 sq. mm 3 core make- havells/polycab/kei, armoured aluminium cable 800 sq. mm 3 core make- havells/polycab/kei, aluminium cable 10 sq mm single core, colour black & red make- havells/polycab/kei, 4mm 2 core aluminium flate cable for service connetion, make- havells/polycab/kei, mmoo dc contactor coil volt. - 30v dc, (4no+4nc) with auxiliary contact ,make- l&t (oem), 3 pole contactor mnx - 25, (1no+1nc) volt - 220, cat no. cs94110 make- l&t (oem), 3 pole contactor mnx - 25, (1no+1nc) volt - 440 make- l&t (oem), 3 pole contactor mnx - 32, (1no+1nc) volt - 220, cat no. cs94111 make- l&t (oem), 3 pole contactor mnx - 32, (1no+1nc) volt - 440, cat no. cs94111 make- l&t (oem), 3 pole contactor mnx - 32, (1no+1nc) volt - 110, cat no. cs94111 make- l&t (oem), 3 pole contactor mnx - 40, (1no+1nc) volt - 110

Lugs Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors