Web Analytics Made Easy - StatCounter

Mast Light Tower Repair Tenders

Get complete information related to latest Mast Light Tower Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Mast Light Tower Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Mast Light Tower Repair Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :45575505 Due date: 08 Jul, 202608 Jul, 2026 6.00 Lacs
Tender For nit for supply and installation of laparoscopy hand instruments set at dept. of obstetrics and gynecology, ruhs hospital of medical sciences, jaipur reusable trocar (5nos): -5.5mm: multifunctional valve, insufflation stopcock and threaded sleeves, pyramidal tip, length(10.5cm) , reusable trocar (5nos): 10/11 mm: multifunctional value insufflation stopcock and threaded sleeves pyramidal tip, length 10.5cm) , reusable trocar (3nos): 13 mm: multifunctional valve, insufflation stopcock and threaded sleeves, pyramidal tip, length (10.5cm) , suction and irrigation cannula (4nos): size 5mm (2) &10mm (2), length 33-36 cm, used with suction and irrigation handle. , grasping forceps (3nos) toothed 2x4teeth: double action jaws, rotating with connector pin for unipolar coagulation, size 5mm, length 33-36 cm, dismantling facility , grasping forceps (3nos) rotating with connector pin for unipolar coagulation, size 5mm, length 33-36cm, dismantling facility toothed 2x3 teeth: double action jaws, , marylation forceps (3nos): double action jaws, rotating with connector pin for unipolar coagulation, size 5mm, length 33-36cm, dismantling facility , grasping forceps (3nos) -atraumatic: double action jaws, rotating with connector pin for unipolar coagulation, size 5mm, length 33-36cm, dismantling facility , grasping forceps-allis (3nos): double action jaws, rotating with connector pin for unipolar coagulation, size 5mm, length 33-36cm, dismantling facility , grasping forceps -mixer (3nos): double action jaws, rotating with connector pin for unipolar coagulation, size 5mm, length 33-36cm, dismantling facility , grasping forceps (1nos): plain dissection & grasping: double action jaws, rotating with connector pin for unipolar coagulation, size 5mm, length 33-36cm, dismantling facility , grasping forceps babcock (1nos): double action jaws, rotating with connector pin for unipolar coagulation, size 5mm, length 33-36cm, dismantling facility. , fan shaped retractor (1nos): rotating, size 5mm, length 33-36cm, dismantling facility , hook scissors (2nos): single action jaws, rotating with connector pin for unipolar coagulation, size 5mm, length 33-36cm, dismantling facility , rotating metzenbaum scissors (3nos): double action jaws, rotating with connector pin for unipolar coagulation, size 5mm, length 33-36cm, dismantling facility , bipolar coagulation forceps(inos): size 5mm, length 33-36cm, , bipolar connection cable (bipolar hf cord) - 2nos , high frequency cord (1nos): for 5mm & 10mm hand instruments with monopole electrodes, spatula tip , high frequency cord (2nos): for 5mm & 10mm hand instruments with monopole electrodes, hook tip , knot pushers (1nos): eye type < length 33-36 , needle holder coaxial type (2nos) : 5mm, tungsten tip, straight handle with ratchet, single moving jaws, length 33-36 cm, , clip applicator medium/large (4nos): rotatable, precision for locking the shaft conveniently, 10mm / compatible with clip lt 300 (2) & lt400 (2) , reducer (2nos): from 10/11mm to 5mm & 5to 3mm , l-hook (2nos) size 5mm, length 33-36cm with pin for cautery , spatula (2nos) size 5mm, length 33-36cm with pin for cautery , fascia closure instrument (1nos): size 2.8mm, length 17cm , washer (10nos each): for 5& 10mm cannula and reducer , laparoscopy hasson cannula (2nos) 10mm reusable , uterine manipulator: , 1. longer shaft for better access , 2. new flexible silicon tips to accommodate varying patient anatomy , 3. efficient for easier, faster, safer tlhs , 4. improved easy load of cup onto cervix , 5. cervical sizer to ensure the right - efficient fit , 6. catheter management system

Corporations And Associations And Others

CTN :45523190 Due date: 19 Jun, 202619 Jun, 2026 4.76 Lacs
Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm

Corporations And Associations And Others

CTN :45523194 Due date: 19 Jun, 202619 Jun, 2026 4.67 Lacs
Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt

CTN :45263256 Due date: 25 Jun, 202625 Jun, 2026 NA
Tender For corrigendum : supply and installation of telecom and scada equipments for extending data connectivity to upcoming cgd hookups and lmc connectivity in southern region on annual rate contract basis - supply items under arc for telecom system, supply of mpls tp equipment, supply of ip/mpls type switch, supply of converter, ac-dc (230 v ac to 48 v dc), ac-dc (230 v ac to 24 v dc), dc-dc (48 v dc to 24 v dc), dc-dc (24 v dc to 48 v dc), supply of battery charger with battery backup, supply of porta cabin, supply of lct, supply of equipment racks, supply of solar panel with battery back up 300 w, supply of solar panel with battery back up 200 w, supply of solar panel with battery back up 50 w, supply of explosion proof telephone, supply of weatherproof telephone, supply of acoustic half hood booth, supply of multi-paired armoured cable (10 pair), supply of 6 twisted pair, 1.5 sq. mm ( 12 core ), individual pair andoverall aluminium mylar tape shielded with drain wire, supply of 6 twisted pair, 0.50 sq. mm ( 12 core ) individual pair and overall aluminium mylar tape shielded with drain wire, supply of telemetry interface cabinet (tic), supply of analog phones, supply of fxo gateway, supply of fxs gateway, supply of ethernet switch, supply of rtu, supply of mini rtu, supply of ftc, supply of joint closures, supply of ip camera, supply of spares for telecom, supply of spares for rtu, supply of ethernet to serial converter, supply of optical to serial convereter, supply of rs 232 to rs 422/rs485 converter, supply of optical to ethernet converter, supply of out door equipment panel, supply of field mounted enclosure conforming ip-66, supply of gprs modem, supply of atex switch 8 port, supply of 24f ofc cable, supply of rtu management licenses for makes like husky, schneider, etc, telecom system (works), installation of mpls/tp equipment, integration of mpls/tp equipment with existing nms, installation and commissioning of solar system, installation of porta cabin, laying and termination of multi-paired armoured cable (10 pair), installation and configuration of converter/switch and interfacing of same with flow computer and integration with scada system, installation of tic panel, design, engineering and submission of documents, testing of ofc and submission of reports, earthing works, installation testing & commissioning of instrumentation cable, installation commissioning and integration of rtus in existing scada server, installation commissioning and integration of mini rtus in existing scada server, installation and integration of ip cameras in existing server for each cameras, installation of gprs modems if supplied as free issue, extending of leased lines for 1000 km distance including modems (one ethernet interface & one e1 interface for lan) at both ends, rectification of ofc including supply of joint pit with identification of fault and testing of of cable, installation of outdoor panel, transportation charges for free issue material (per km rate to be quoted), laying of ofc through hdd method, laying of ofc through direct trench method, point to point radio communication (2.4/5.8 ghz licence free ism band), laying of ofc cable ( if ofc supplied as free issue by gail), blowing of ofc in duct, manday charges [post-installation manday charges for rtu/telecom works on an on-call basis, including troubleshooting, system calibration, software updates, configuration adjustments, and performance optimization. ], total amount excluding gst, gst (cgst&sgst/utgst or igst) in percentage (%) on net total amount

CTN :45535322 Due date: 14 Jul, 202614 Jul, 2026 11.50 Crore
Tender For design, engineering, supply, installation, testing and commissioning of cable management system for the shore to ship power supply facility at coal berth i and coal berth ii of paradip port.

Central Government / Public Sector

CTN :45072420 Due date: 22 Jun, 202622 Jun, 2026 NA
Tender For corrigendum : supply of centralized biometric attendance system for all serpl locations d d - face and finger biometric reader , biometric attendance management and acs sw , contactless smart card , armored cat 6 utp networking cable , access intelligent controllers , install test commission , resident engineer at bhubaneswar , camc bhubaneswar regional office , camc prrpl jatni , camc phpl berhampur , camc phbpl paradip uhq , camc phdpl balasore , camc phbpl balasore , camc pshpl somnathpur , camc prrpl paradip , camc prrpl sambalpur , camc prrpl raipur , camc prrpl korba , camc prrpl jharsuguda , camc prrpl khunti , camc hrpl ranchi , camc phpl vijaywada , camc phpl hyderabad , camc phpl vizag , camc phpl atchutapuram , camc phpl rajahmundry , camc cgd vizag , camc cgd karimnagar , camc guntur , camc kurnool

Central Government/Public Sector

CTN :45492650 Due date: 30 Jun, 202630 Jun, 2026 NA
Tender For supply of 24-port enhanced cat-6 fully loaded modular type patch panel , modular wall plate with abs plastic body, loaded , modular straight shuttered single port face plate with abs plastic body , 0.5 m cat 6 utp patch cord , 3m cat 6 utp patch cord h , 19 inch, ul certified 12 u wall mountable rack fully loaded , horz cable organiser 1u chanel on front , fiber liu, drawer type, loaded, 6 port , i o box set , fiber liu, drawer type, loaded, 24 port adapter , patchcord,sm os2,duplex lc-sc,pc type,3m , cat 6, 4 pair utp cable , 100 x 50 mm pvc cable management system , 100 x 50 mm pvc cable management system along with accessories , 25mm pvc pipe for fiber cable , hdmi 1x4 splitter 4k , hdmi 4k 5 mtr cable for pc , hdmi 4k 2 mtr cable for splitter to hdmi converter , hdmi to lan converter 60mtr , labour charges * /bid number : gem/2026/b/7637439 + /dated: 09-06-2026 ' ' / bid document 1 / 22

Central Government And Public Sector

CTN :45034478 Due date: 17 Jun, 202617 Jun, 2026 NA
Tender For tender for supply of radiation resistant cctv camera : : - type-ii (color ccd/cmos , 100m rad) radiation resistant camera head along with radiation resistant pan & tilt unit and mounting brackets. as per attached annexure-1 , corrigendum annexure-2 and annexure-3. , cabling system to transmit signals form vault cameras to ccu system which includes camera to ccu radiation resistant composite cable of 300 meters with 6 sets of cable connectors and applicable power cables as per annexure-1 , corrigendum annexure-2 and annexure-3. , field camera control unit and its racking system which includes 2 no. of camera control unit sub rack & 6 sets of camera control unit (ccu) cards (3 to be installed in field and 3 to be kept as spare for future ) as per annexure-1 , corrigendum annexure-2 and annexure-3 or equivalent sub rack system as per annexure-1 , corrigendum annexure-2 and annexure-3. , setup to convert ccu signals to optical signals which should include 3 no. of fiber optic transmitter and receiver set (capable of 4 camera system) and 6 no. of fiber patch cords , single mode , simpex and 3 no. of light interface unit 12 port , as per annexure-1 , corrigendum annexure-2 and annexure-3. , type-vi (color ccd/cmos sensor , non rr auto dome camera) with mounting brackets as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism to transmit signal from non radiation resistant camera including , poe power supply for non-rr ptz camera (6 no.) field jb /rack in ss material for non-rr ptz camera (2 no.) liu 6 port , din rail mountable for non radiation resistant ptz camera (3 no.) din rail 8 port un-managed network switches (3 no.). 4 no. of fiber patch cords , single mode , duplex for non-radiation resistant ptz camera or equivalent as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism for receiving signal at control room including light interface unit 24 port , rack mount (2 no.) and network video encoder (minimum 16-channel) along with accessories for intra-panel connections (2 no.) and 24 port un-managed network switches or equivalent (2 no.) , 4 no. of fiber patch cords , single mode , duplex as per annexure-1 , corrigendum annexure-2 and annexure-3. , recording and monitoring pc as per annexure-1 , corrigendum annexure-2 and annexure-3. , joystick suitable for mounting on control room panel cutout as per panel drawing as per annexure-1 , corrigendum annexure-2 and annexure-3. , 21 inch led backlit led color monitor as per annexure-1 , corrigendum annexure-2 and annexure-3. , video monitoring software setup as per annexure-1 , corrigendum annexure-2 and annexure-3 for minimum 9 camera. , mobile dolly consisting of camera control unit (ccu) , encoder , switch , joystick , engineering laptop with 15-inch to 17-inch screen , video management software for one camera , connection cables etc and their cabling as per annexure-1 , corrigendum annexure-2 and annexure-3. , control panel/rack 42u/ 27u setup for racking all instruments of cctv at control room as per annexure-1 , corrigendum annexure-2 and annexure-3. , cabling network optical fiber cable (6 core armored cable)-2000 meters twisted pair cable , rs485 , signal cable -200 meters unarmored coaxial cable rg59 -200 meters ethernet cable , cat-6 utp cable -610 meters video connector set -10 meters ethernet connectors rj-45 100 pieces conduit for cables 800 meters and other separate cables/ power cables/accessories required during installation one set of tool tackles for assembly/ disassembly/ of radiation resistant camera head viz. allen keys , lubricants , cable ties , loctite , heat sink , blank caps etc. 2 no. of control panel/rack size 27u setup for racking all instruments of cctv at field as per annexure-1 , corrigendum annexure-2 and annexure-3. as per annexure-1 , corrigendum annexure-2 and annexure-3 . , site installation & commissioning as per annexure-1 , corrigendum annexure-2 and annexure-3. , spare radiation resistance camera head s

State Government

CTN :45431330 Due date: 15 Jun, 202615 Jun, 2026 37.61 Lacs
Tender For supply and installation or urs at various areas of zone south, jodhpur - providing & laying xlpe insulated & p.v.c. sheathed armoured aluminium cable confirming to is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, round / flat strip armouring of cables, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray(with cable tie) including testing commissioning etc. as required of following size.10.0 sq. mm x 4 core, supply & installation of unified regulation system (urs) for existing street light that meets the following specification.the system must feature a 240mhz dual core processor with gsm/gprs communication capabilities and support for ota firmware updates.it should come with an internal class 1.0 energy metering system that can provide real time data of crucial electric load parameters along with fault and theft alerts.the urs must include remote load scheduling and control functionalities with a feedback time of less than seconds.the enclosure confirms to ip55 standards,and be fire retardant,weatherproof,and rustproof. the system should use a lightweight protocol for secure ,real-time communication and include cloud based software for comprehensive device management and remote control. it should be able to control single phase 5.5kw and 3 phase street light load upto 8.5kw and should come with 2pole/4pole mcb upto 25a/40a at output for short circuit protection .having a 2-year warranty urs will be installed at site as per direction of engineering incharge. (size 570*520*190mm)

Corporations/Associations/Others

CTN :45442722 Due date: 15 Jun, 202615 Jun, 2026 NA
Tender For annual tender for supply of computer and computer accessories with maintenance for year-2026-27 - mouse, mouse ps2, mouse wireless - dell/iball/logitech/hp, usb mouse - dell/iball/logitech/hp, mouse pad, keyboard, keyboard ps2, keyboard usb - dell/iball/logitech/hp, keyboard and mouse combo, combo pack keyboard and mouse - dell/iball/logitech/hp usb, combo pack keyboard and mouse - dell/iball/logitech/hp wireless, pen drive, pen drive 8 gb, pen drive 16 gb, pen drive 32 gb, 3.0, pen drive 64 gb, 3.0, pen drive 128 gb, pen drive 256 gb, networking, 5 port switch, gigabit - d-link / digisol / tp-link / equivalent, 8 port switch, gigabit - d-link / digisol / tp-link / equivalent, 16 port switch, gigabit - d-link / digisol / tp-link / equivalent, 24 port switch, gigabit - d-link / digisol / tp-link / equivalent, lan cable cat 6a, per mtr with casing and capping - d-link / equivalent, rj 45 lan connector, network i/o box with face plate, wireless dual band router ac1200 or higher (2.4ghz + 5ghz, gigabit lan ports) - d-link / digisol / tp-link / equivalent, adsl wireless router n300 dlink / digisol, networking charges per node, poe switch 8 port, gigabit - d-link / digisol / tp-link / equivalent, poe switch 16 port, gigabit - d-link / digisol / tp-link / equivalent, poe switch 24 port, gigabit - d-link / digisol / tp-link / equivalent, 32 port switch, gigabit - d-link / digisol / tp-link / equivalent, poe switch 32 port, gigabit - d-link / digisol / tp-link / equivalent, antivirus, antivirus server security edition single user 1 year - quick heal / equivalent, endpoint security antivirus for desktop/laptop real-time protection, anti-ransomware,web & usb protection,cloud/on-premise central management, single user, 1 year - quick heal / equvalent, endpoint security antivirus for desktop/laptop real-time protection, anti-ransomware,web & usb protection,cloud/on-premise central management, multi user, 1 year - quick heal / equvalent, ism office bilingual, ram, ram 4gb ddr3 - kingston / equivalent, ram 8gb ddr3 - kingston / equivalent, ram 4gb ddr4 - kingston / equivalent, ram 8gb ddr4 - kingston / equivalent, ram 4gb ddr5 - kingston / equivalent, hard disk, internal hard disk 512gb sata hdd - seagate/samsung, internal hard disk 256gb ssd - seagate/samsung, internal hard disk 512gb ssd - seagate/samsung, external hard disk 512 gb - segate / sony / wd, external hard disk 1 tb - segate / sony / wd, printer, laser printer black and white - canon imageclass lbp6230dw / hp / brother / equivalent configuration, laser printer all in one (print / copy / scan) - canon imageclass mf645cdw / hp / brother or equivalent configuration, colour laser printer 18-24 ppm, usb + wi-fi, epson/hp / canon / brother or equivalent configuration, colour inkjet printer 18-24 ppm, usb + wi-fi, epson/hp / canon / brother or equivalent configuration, duplex laser printer automatic duplex printing, 30 ppm speed, usb + ethernet connectivity hp / canon / brother / equivalent, desktop computer, intel core i3 (12th/13th gen), 8 gb ram, 512 gb ssd, monitor 22 , keyboard + mouse, windows 11 pro, dell / hp / lenovo or equivalent, intel core i5(12th/13th gen), 8 ram, 512 gb ssd, monitor 22 , keyboard + mouse, windows 11 pro, dell / hp / lenovo or equivalent, all in one series desktop computer, intel core i3, 8gb ram, 512gb ssd, 21.5 /23.8 full hd display, inbuilt webcam & speakers, keyboard & mouse, lan + wi-fi, windows 11 pro, hp / dell / lenovo / asus or equivalent, monitor, 21.5 led monitor - lg / samsung / equivalent, 23.8 led monitor - lg / samsung / equivalent, 24 led monitor - - lg / samsung / equivalent, monitor repair charges, lenovo (ibm) server, server :-one processor with intel xenon(r) cpu e3 -1220 v2 (quad core),3.1 ghz ,8mb, 1600 mhz,ram - minimum 16 gb with double slot harddisk- 1 tb sata 7200 rpm ,smps - 2 smps, double lan card, operating system- windows server 2008 r2 x64 standard edition service pack1, 3 years onsite warranty + 24 *7, lenovo
 Loading, Please wait...

Connect us via What's Up