Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars
Tender For supply of portable submersible pumps d d - upper diffuser for portable submersible pumps model ks 2315 1point5hp , upper mechanical seal for portable submersible pumps model , lower mechanical seal for portable submersible pumps model , top bearing for portable submersible pumps model ks 2315 1point5hp , main bearing for portable submersible pumps model ks 2315 1point5hp , impeller nut for portable submersible pumps model ks 2315 1point5hp , impeller key for portable submersible pumps model ks 2315 1point5hp , terminal plate for portable submersible pumps model ks 2315 1point5hp , o ring set for portable submersible pumps model , cable sealing components for portable submersible pumps model , portable submersible pumps model ks 2315 1point5hp srpoint nopoint2012 5452 srpoint , lower diffuser for portable submersible pump model ks 2430 3hp , upper diffuser for portable submersible pump model ks 2430 3hp , upper mechanical seal for portable submersible pump model , lower mechanical seal for portable submersible pump model , top bearing for portable submersible pump model ks 2430 3hp , main bearing for portable submersible pump model ks 2430 3hp , impeller nut for portable submersible pump model ks 2430 3hp , impeller key for portable submersible pump model ks 2430 3hp , terminal plate for portable submersible pump model ks 2430 3hp , o ring set for portable submersible pump model , cable sealing components for portable submersible pump model , cable for portable submersible pump model ks 2430 3hp srpoint , lower diffuser item nopoint 32 drgpointnopoint 2550 04 for , upper diffuser item nopoint 27 drgpoint nopoint , lower mechpoint seal item nopoint 26 drg nopoint , top bearing item nopoint 11 drg nopoint 2675 53 , main bearing item nopoint 20 drg nopoint 2675 54 , impeller nut item nopoint 31 drg nopoint 2675 58 , o ring set drg nopoint 2675 55 for submersible , cable sealing set item nopoint 4 drg nopoint , impeller key item nopoint 30 drg nopoint 2550 57 , upper mechpoint seal item nopoint 22 drgpoint nopoint , hardware set for portable submersible pumps model ks 2315 1point5hp , hardware set for portable submersible pump model ks 2430 3hp , hardware set for submersible pump model ks 2675 7point5hp of
Tender For repair maintenance of of various electrical and mechanical services at 100 bedded lbs hospital khichripur delhi sh supplying and replacement of faulty fire fighting fire alarm and pa system item at lbsh
Tender For tender for supply of mechanical seal -refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope , refer item text of enquiry cum offer for technical specification and scope
Tender For supply of refer soq item no. 1a. supply of lt power cable of 1.1 kv grade of following size...a. 3.5 x 120 sqmm. , refer soq item no. 1b. supply of lt power cable of 1.1 kv grade of following size...b. 3.5 x 70 sqmm. , refer soq item no. 1c. supply of lt power cable of 1.1 kv grade of following size...c. 4 x 25 sqmm. , refer soq item no. 2a. supply of high-density polyethylene hdpe pipe...a. 40 mm dia , refer soq item no. 2b. supply of high-density polyethylene hdpe pipe...b. 63 mm dia , refer soq item no. 3a. laying of one number pvc insulated and pvc sheathed, xlpe power cable of 1.1 kv grade...a. up to 35 sqmm , refer soq item no. 3b. laying of one number pvc insulated and pvc sheathed, xlpe power cable of 1.1 kv grade...b. above 35sqmm and up to 95 sqmm , refer soq item no. 3c. laying of one number pvc insulated and pvc sheathed, xlpe power cable of 1.1 kv grade...c. above 95 sqmm and up to 185 sqmm , refer soq item no. 4. demolishing cement concrete or bituminous road or paver block roads by manually or mechanical means...as per direction of engineer-in-charge. , refer soq item no. 5. providing and laying in position cement concrete 1-2-4, 1 cement, 2 coarse sand, 4 graded stone aggregate 20 mm nominal size...etc. as required. , refer soq item no. 6a. supply and making end termination with compression brass gland and aluminium lugs...a. 4c x 25 sqmm. , refer soq item no. 6b. supply and making end termination with compression brass gland and aluminium lugs...b. 3.5c x 70 sqmm. , refer soq item no. 6c. supply and making end termination with compression brass gland and aluminium lugs...c. 3.5c x 120 sqmm. , refer soq item no. 7a. providing, laying and fixing following dia g.i. pipe medium class in ground complete...a. 40 mm , refer soq item no. 8. design, manufacture, supply, installation, testing and commissioning of outdoor type double door lt panel....160a 4 pole fp, 35 ka mccb with thermal magnetic release - 3 nos. , refer soq item no. 9. supply, installation, testing and commissioning of weather proof suitable size sub feeder panel..outgoing, 63a 4 pole, 25 ka mccb with thermal magnetic release - 6 nos. , refer soq item no. 10. supply of led street light 45 w 6500 lumens, min. cri greater than or equal to 70...pc cover as per the technical specification. , refer soq item no. 11. supply of 6 mtr high gi octagonal continuously tapered galvanised street light pole...keselec, model-valmont or equivalent. , refer soq item no. 12. erection of metallic pole of item no. 11 in cement concrete...including excavation and refilling etc. as required. , refer soq item no. 13. itc of prewired, outdoor led fittings of all types complete with accessories...complete as required. , refer soq item no. 14. sitc of pre-fabricated outdoor type 3-phase street lighting panel...and brick foundation for erecting the ms frame etc. as required. , refer soq item no. 15a. supplying and laying of following size dwc or hdpe pipe...complete as required. a. 40 mm dia , refer soq item no. 15b. supplying and laying of following size dwc or hdpe pipe...complete as required. b. 63 mm dia , refer soq item no. 16. earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories...with charcoal or coke and salt as required. , refer soq item no. 17. providing, laying and fixing 80 mm dia g.i. pipe, medium class...re-positioning same with pcc. , refer soq item no. 18. providing and fixing 6 swg dia g.i. wire on surface or in recess...as required. //bid details 2 / 23
Tender For supply of ss conduit40(od) x 1(t) mm and l=6000mm., as per drawing: aisi-304. for construction, mechanical properties & testing refer is: 9537 part 1&2, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]
Tender For providing of comprehensive maintenance and annual servicing at a regular interval of 45 days of all mechanical and electrical components of thomson make lift (including replacing of necessary electronic or mechanical equipment) in malkajgiri zonal office for a period of one year from apr-2026 to mar-2027 in malkajgiri circle , malkajgiri zone mmc(item no.12)
Tender For supply of ss conduit 32(od) x 1(t) mm and l=6000mm., as per drawing: aisi-304. for construction, mechanical properties & testing refer is: 9537 (part i)-1980 (reaffirmed 2020) and is: 9537 (part ii)-1981 (reaffirmed 2017), packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packedwith adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]
Tender For 1.supply item description: 1. supply, installation, testing and commissioning of integrated upgradable console with gps location based public announcement and passenger information system (papis) and led / lcd destination board as per rdso specification no: rdso/cg-18001 (rev.2) with amendment-01 or latest in various types of in- service non- ac lhb coaches. led/lcd destination boards will be non-sunk in cavity type as per dy.cde/rcf instruction no.md46291 dated 17.01.2024. mechanical enclosure is as per option (a) of para no. 14.6.2 of rdso specification. compatible connectivity should be 5g or better as described in para 14.1.1 of said rdso specification. after sales maintenance, training and warranty as per said rdso specification are also in the scope of supply. special conditions of contract are as per annexure a. 2.internet connectivity, base monitoring unit (bmu) and centralized web server as per para no. 3.2, 3.3 and 3.4 of rdso specification no. rdso/ cg/18001 (rev-2) with amendment-01 are not in the scope of supply. however, hardware and software of papis system should work compatibly with (a) internet connectivity (b) bmu and (c) centralized web server which may be added to the system separately on later stage by railways. type of coach - lhb-nonac chair car, non-ac sleeper, gs, pantry car warranty period: 78 month(s) from the date. [ warranty period: 78 months after the date of delivery ]