Latest mechanical machine spares Tenders | Government mechanical machine spares Tenders

corporations/Associations/Others

CTN :41746828

18 Sep, 2025 NA

Jaipur - Rajasthan

Tender For auction sale of speciality items- equipments & accessories,engines - steam/gas/oil related equipments & accessories,auxiliary plant eqipment: water treatment, effluent treatment etc.,24" strainer,42" ,30" & 24" steel pipes,steel pipe fittings i.e. weldolets, half couplings, elbos etc.,pipe fittings i.e. bends etc.,pipe fittings i.e. elbos etc.,pipe fittings i.e. reducers of different sizes,steel pipe fittings i.e. unequal tees,steel pipe fittings i.e. equal tees,steel pipe fittings i.e. flanges etc.,mechanical valves & valve parts,mechanical check valves -24 inch,fastener, bolt, gaskets, o rings & screws etc.,16",18" & 24 " lor plug,steel split tee 16 inch,instrumentation accessories,pressure control valve- 12 inch,check valves, crosshead, gasket, sliding shoe

Co-operative

CTN :41565251

12 Sep, 2025 35.00 Lacs

Kattappana - Kerala

Tender For tender for the supply installationtesting and commissioning of falling film pre chiller for ibt with all required refrigeration pipe lines and controls including electrical and mechanical fittings with all accessories at kattappana dairy idukki dist

CTN :41710232

11 Sep, 2025 NA

Gonda - Uttar Pradesh

Tender For supply of led based lamp unit for bl key box with constant current control and mechanical fittings, input 110 v dc +/- 22.5% as per type no. eeic/l/bl-key-box-01 and as per els/ajj drawing no.- trs/acl/p/632. makee.e.i corporation or equivalent.

CTN :41692521

25 Sep, 2025 NA

Raebareli - Uttar Pradesh

Tender For works contract for interior mechanical and electrical furnishings & fittings in lslrd lhb type coaches with wider window as per scope of work.

CTN :41692586

24 Sep, 2025 NA

Raebareli - Uttar Pradesh

Tender For works contract for interior mechanical furnishings & fittings in lwaccn eog lhb type ac ss trough coaches including plumbing work as per scope of work

Central Government/Public Sector

CTN :41669684

23 Sep, 2025 NA

East Singhbhum - Jharkhand

Tender For annual repair and maintenance of 500 mm dia di pipeline from kharkai to turamdih : : - patrolling or inspection of di pipe line for checking leakage detecting from intake well cum pump house to turamdih area where pipe line exists with technical persons minimum one fitter with transport facility daily and including tightening of nuts and bolts where ever required for rectification of leakages observed during routine inspection. , attending as and when required major breakdown or rectifying leakage of di pipe line including fixing of necessary mechanical joint and all accessary within twelve hours information or notice for rectification till the resumption of the service including labour charges equipment tools and tackles but excluding cost of materials etc , overhauling charges of valves including change of gland packing if required with all labour charges for joints for following sizes of gate or sluice valve or butterfly valves for four hundred mm dia , overhauling charges of valves including change of gland packing if required with all labour charges for joints etc for following sizes of gate or sluice valve or butterfly valves for five hundred mm dia. , repairing of air valves including charges of float ball with all labour charges tools and tackles , earth work in excavation in trenches or drains including dressing saides and ramming of bottoms lift upto one point five metre including getting out the excavated soil and disposal of surplus excavated soil as directed all kinds of soil , return earth filling by available excavated earth excluding rock i trenches plinth sides of foundation etc in layers not exceeding twenty cm in depth consolidating each deposited layer by ramming allow for breading up lumes shrinkage etc watering lead upto fifty metre and lift upto one point five metre complete as directed by the eic. , clearing jungle including uprooting of rank vegetation grass bush wood trees and saplings of girth upto thirty cm measured height of one metre above ground level and removal of rubbishe upto a distance of fifty metre outside the periphery of the area cleared. , surface dressing of the ground including removing vegetation and in equalities not exceeding fifteen cm deep and disposal rubbish lead upto fifty metre and lift upto one point five metrea all kinds of soil. , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete , providing and laying in position cement concrete of specifieda grade excluding the cost of centering and shuttering all work up to plinth level one cement isto three coarse sand six graded stone aggregate twenty mm nominal size. , rcc work below and above plinth level up to floor five level one cement isto one point five coarse sand isto three graded stone aggegate twenty mm nominal size is to be provided. , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete. , centering and shuttering including strutting propping and removal of form for all heights. , 15mm thick cement plaster on rough side of single or half bricke wall of mix one cement isto six coarse sand to be provided. , neat cement punning , supply at site laying jointing including gasket nut bolts all complete miscellaneous di fittings like di bend mechanical joint tee gland packing all item as per is9523 for four hundred or five hundred mm dia di specials with spigot and flange combination like bend tee of class k12 suitable for push on jointing as per is9523 pipe all complete.

corporations/Associations/Others

CTN :41680009

12 Sep, 2025 NA

Guwahati - Assam

Tender For auction sale of mechanical pump spares,mechanical compressor spares,mechanical miscellaneous spares,pipe fittings and flanges,valves

Central Government / Public Sector

CTN :41397798

08 Sep, 2025 5.15 Crore

Chennai - Tamil Nadu

Tender For corrigendum : mechanical works including supply, engineering, fabrication, erection, installation, commissioning, arranging tpi for 3 nos of 15 mt mounded storage vessels and 2 nos of 200kl fire water tanks, allied pipelines and fittings, hydrant pipeline, safe

Central Government / Public Sector

CTN :41655912

15 Sep, 2025 NA

Haldia - West Bengal

Tender For custom bid for services - 9040c25d03 annual rate contract for in situ machining of various equipments at haldia refinery-00010 cme10051xx in-situ flange machining of flanges (all types) charges to carry out in situ machining of gasket face flanges (all types of flanges) of heat exchanger/ pipe/ pipe fittings/ column manhole/ reactor manhole/ vessel manhole/ or any other equivalent equipment with skilled manpower & suitable equiment/ machinery. job includes supplying of all types of tools and tackles, jigs and fixtures, lifting arrangements, electrodes, welding equipment, pmi machine, machineries, all consumables, labour etc. and supervision to complete the work in all respects as per drawings and direction of the engineer-in-charge, including area preparation, taking clearance for hot jobs, area cleaning after completion of work, flushing wherever required. the scope includes all necessary jobs (including weld buid up) required to restore the flange face finish as per asme b16.5/ b16.47 as per drawing specifications. the machined surface flatness and/ aarh, as applicable, is to be maintained as per prevailing codes and standards. contractor to identify the flange metallurgy for electrode selection required for weld build up. contractor has to execute weld build up jobs under the inspection of inspection department iocl refinery. after completion of work, the flange has to pass through pressure testing. unit of measurement "inch-dia" denotes inch-dia of the circular / oval flanges. in case of oval flanges, the measurement highest flange dia of a particular flange will be considered., 00020 cme1005101 in-situ flange machining of flanges (all types), 00030 cme1005102 mobilisation and demobilization charges, 00040 1,856,238.- round the clock/ shutdown factor: for shutdown/ breakdown/ emergency jobs, where the jobs are required to be continued round the clock, a multiplication factor of 25% shall be adopted on rfq item 10 comprising of m&i common mechanical, instrumentaion & electrical sor items (item nos. starting with cme, cin & cel)., .

Central Government/Public Sector

CTN :41406841

09 Sep, 2025 45.00 Lacs

Hoshangabad - Madhya Pradesh

Tender For corrigendum : repair/mant of joinery, plastering, brick work roofing, plumbing, sanitary, internal wiring including fittings and fixture and certain b and r, electrical and mechanical works for tithwal, barki, cariappa, chushul, kohima and jayanti coy at aec trg college and centre

Mechanical Machine Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Co-operative

Central Government/Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector