Latest metal frame Tenders | Government metal frame Tenders

corporations/Associations/Others

CTN :40884410

14 Jul, 2025 18.26 Lacs

Moradabad - Uttar Pradesh

Tender For supply and installation of furniture for scada control room at 33/11 kv s/s company baag distt. moradabad under moradabad smart city project distt. moradabad. - supply and fxing combind 5 user console desk size 5500mmx800mmx750mm operator control desk will have following features: 1- profile structure of operator desk will be of 3mm thick extruded aluminium with supporting crca top & bottom frame. colour: as per approval. 2- tabletop is made of 25mm mdf board. colour: as per approval 3- separate horz. cable routing wire baskets for power & data cables will be provided 4- power distribution sockets (each user stations will be provided with 2 nos separate pdb units (1 for main & 1 for ups line) each pdb unit will have 6 points of 5/15a sockets with mcb. 5- 25mm mdf board side panels (fixed side panels). colour: as per approval. 6- 18mm mdf front & back modesty panel/shutter (openable with hinge and locks). 7- cpu sliding tray and back modesty will be made of powder coated crca sheet. colour: as per approval.8- 2 nos of exhaust fan will be provided for adequate heat management for each section.9- ventilation louvers will be provided on both front & rear modesty with air filters.10- retractable key board tray will be provided in each section. 11- cpu will be mounted on cpu sliding tray.12- hinges for the doors shall be provided. 13- earthing busbar will be provided. 14- cfl/led lamp will be provided for internal illumination. 15- per console 2 nos. 10 amp dp mcb (total 10 nos.) siemens/havells make complete with wiring and fitting will be provided. 16- per console 2 nos. 6 way pdu 5/15 power socket (total 10 nos.) complete with wiring and fitting will be provided. 17- per console 2 nos fan (total 10 nos.) rexnord make complete with wiring and fitting will be provided. 18- per console 2 nos toggle swich for fan (total 10 nos.) complete with wiring and fittings will be provided. 19- per console 2 nos, data socket (rj45) (total 10 nos.) d-link/legrand make complete with wiring and fitting will be provided, 20- per console 02 nos telephone socket (rj11) (total 10nos.) d-link/legrand make complete with wiring and fitting will be provided, 21- per console 1 nos keyboard tray (total 5 nos) ebco/innofit/harmoni make complete with all manner will be provided. 22- per consol 2 nos monitor arm (total10 nos) innofit/harmoni make complete with all manner will be provided. 23- looping will be provided for both type of power supply . all specification include the cost of all material , labour , t&p and other nessesary things required for proper completion of work. colour of lamination of table top , side , front ,back shutter and profile & frame is as per approved by e/i nsi (other important specification in annexure (1) attached as pdf), supply and fxing combind 4 user console desk size 4000mmx800mmx750mm, operator control desk will following features: 1- profile structure of operator desk will be of 3mm thick extruded aluminium with supporting crca top & bottom frame. colour: as per approval. 2- tabletop is made of 25mm mdf board. colour: as per approval 3- separate horz. cable routing wire baskets for power & data cables will be provided. 4- power distribution sockets (each user stations will be provided with 2 nos separate pdb units (1 for main & 1 for ups line) each pdb unit will have 6 points of 5/15a sockets with mcb. 5- 25mm mdf board side panels (fixed side panels). colour: as per approval. 6- 18mm mdf front & back modesty panel/shutter (openable with hinge and locks). 7- cpu sliding tray and back modesty will be made of powder coated crca sheet. colour: as per approval.8- 2 nos of exhaust fan will be provided for adequate heat management for each section.9- ventilation louvers will be provided on both front & rear modesty with air filters.10- retractable key board tray will be provided in each section. 11- cpu will be mounted on cpu sliding tray.12- hinges for the doors shall be provided.

State Government

CTN :40966103

08 Jul, 2025 NA

Ratnagiri - Maharashtra

Tender For quotation for supply of material for clean room doors-galvanized iron sheets duly powder coated. shutter has sheet thickness of 0.8 mm and the frame of 1.2 mm. standard 50 mm panel has frame width of 50 mm and shutter width of 46mm. shutter thickness 46 mm filled with puf. door closer ts 1000c)

CTN :40974274

15 Jul, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of provn of community hall incl cafeteria tourist reception centre toilets and medical emergency accn - provision of community hall including cafeteria, tourist reception centre and medical emergency accommodation , electrical wiring , window frame , bricks , ceiling work , wooden door , window shutter , wooden paneling , flooring , construction of coffee shop , air lock chamber , wooden balcony , construction of toilets , aluminum fitting , western style commode , wash basin , urinal point , ventilator window

CTN :40716066

10 Jul, 2025 NA

Dimapur - Nagaland

Tender For corrigendum : supply of rubik permanent defence - hdpe laminated sand bag of size 75x40 cm, sand colourand each bag having weight not less than 60 gms , shs 6mm thick size 120 x 120mm x 2.4m long for column withholes made on the top of coln as per design for fixing g1beam. make, tata oblique sail oblique jindal , ismb 150 rsj150 x 75 mm g1 1.85 mtr long for beam conforming torelevant is, make, tata oblique sail oblique jindal , ismb150 rsj 150 x 75 mm g1 60 cm mtr long for beamconforming to relevant is, make, tata oblique sail obliquejindal , ismb 125 rsj 125 x 70mm g2 3.0m long for beam 2conforming to relevant is, make, tata oblique sail obliquejindal , shs 6 mm thick size 70x70mm x 1.85m long for g3bottom bracing with conforming to relevant is make tataoblique sail oblique jindal , 6mm thick ms plate 75x150mmwelded with g1 beam connected with nut and bolts. , 6mmthick ms plate 100mm x 100mm with a gap of 75mmwelded with coln bottom to connect 70mm x70mm shs withnut and bolts, 04 each. , 12mm dia nut bolt 75mm longinserted in 12mm dia eight nos hole in each column. , 6mmthick ms base plate of size 150 x150 mm for shs columnincluding welding, knotching, cutting and nuts,bolts, washeretc. , steel roofing trough srt of size 1630 mm x 613 mmx 180 mm made out of 2 mm thick hot rolled carbon steelsheet conforming to relevant is complete. , ms hexagonalnuts. bolts and washers 12 mm dia 40 mm long. , ldpesheet 3 m wide weighing 1 kg oblique rm black in colourand shall contain not less than 2 percenttage of carbonblack, sample to be approved before supply. , red oxideprimer conforming to relevant is. , synthetic enamel paintcolour green ist quality conforming to relevant is, make,johnson and nicholson india ltd, nerolac paint and asianpaint. , thinner, sample to be approved before supply. , drydistemper, sample to be approved before supply. , chalkwhiting, sample to be approved before supply. , paint brush4 inch make, amar oblique lucky sample to be approvedbefore supply. , pre fabricated steel door of size 0.90m x1.80m made out of 2mm thick ms black carbon sheetwelded to 30x30x6mm isa door shutter frame fitted to50x50x6mm isa door frame. , supply of swivel bullet proofglass glass 750mm x 500mm size 72 mm thick withfabricated iron frame including necessary lockingarrangement in the frame to fix the glass in the loop hole. ,silicone gel sealent of 01 pack of 400 gms includingaplicator gun. , ply wood 10 mm thick as per requirementfor flat surface. , foundation bolts of 16 mm dia and 250 mlong with nut, bolts washer etc.

CTN :40962972

19 Jul, 2025 NA

Satara - Maharashtra

Tender For supply of study table with powder coated metal frame , single bed with metress and pilow , plastic chair with fabric upholstery and cushion , medium steel storage , window curtain rod , window curtain , mirror cabinate with aluminum frame , bath towel stainless steel rod , auto shoe rack big size

CTN :40611135

07 Jul, 2025 NA

Rajauri - Jammu And Kashmir

Tender For corrigendum : construction of girls toilet - earth work in foundation , aggregate 40 mm nominal size , aggregate 20 mm nominal size , coarse sand , stone boulder , brick , door window frame of angle iron 40x40x3 m with shutter of angle iron and ms sheet 20 gauge with necessary hinges fitting and locking system , cement 43 or 53 grade isi , tar steel 10mm dia equal 1 qtls , binding wire , shuttering material wooden planks ballies rope drum ladder on hire basis , water tank 1000 ltrs capacity , septic tank 5x8x6 feet with rcc mix with 20 present stone and rcc slab cement concrete floor in hole over complete finish , sanitary fitting of both room fitted with we qqrisa pan with lover lvl cistern five ltrs capacity and taps and bib cock and washbisin and urinal etc

corporations/Associations/Others

CTN :40955134

18 Jul, 2025 6.02 Lacs

Dehradun - Uttarakhand

Tender For procurement of electrical items for yamuna colony electrical maintenance work - cable wire clips 8 mm. (isi make), lamp batten holder (cona, anchor, havells), bell ding dong (cona, anchor havells), flexible copper wire 23/76 swg (rajdhani, plaza, m-flex)., flexible copper wire 40/76 swg (rajdhani, plaza, m-flex)., fan regulator electronic switch type (cona), isolator 63 amp (make legrand, havells, l&t), led street light fitting with all access (make surya-model no. ngn sle ul 45w ip66, make havells -model no. endura pearl-neosl45wled757sasytopc, make philips-model no. brp 331 led 54 ce r5n pc psu), pvc multistrand copper wire 2.5 sq mm (polycab, finolex, rr kabel), pvc multistrand copper wire 1.5 sq mm (polycab, finolex, rr kabel), pvc tap 3/4" (isi make), pvc gutty (isi make), pvc square box, modular switch 6 a, l&t (engem), modular switch 6 a, ancher (penta), modular switch 6 a, cona (status), modular switch 6 a, havells (reo), modular socket with shutter 6a, cona (status), modular switch 16 a, legrand (britzy), modular switch 16 a, ancher (penta), modular switch 16 a, cona (status), modular switch 16 a, havells (reo), modular socket 16 a, legrand (britzy), modular socket 16 a, ancher (penta), modular socket 16 a, cona (status), modular socket 16 a, havells (reo), modular fan regulator 2 module, ancher (penta), modular fan regulator 2 module, cona (status), modular fan regulator 2 module, havells (reo), 3 module cover plate with frame, make havells (reo), 3 module cover plate with frame, make legrand (britzy), 6 module cover plate with frame make havells (reo), 6 module cover plate with frame make legrand (britzy, surface mounting plastic boxes 3 module. (isi mark), pvc multistrand copper wire 1.0 sq mm (polycab, finolex, rr kabel), led t-5 tube light 25w size 4 (make surya-model no. 25w 6500k g-line eco led batten, make havells -model no.led pride ultra nxt batten 25 w 6500 k,, make philips-model no.philips slimline super bright led tube light 25w)

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830502

16 Jul, 2025 6.14 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for staff quarters and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada. (package-2) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., library coffie table- supplying and placing center table in with an overall size 1200mm x 600mm x 450mm (h) that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywood with both side laminate finish. the four side of the table is provided 150 mm wide 18 mm thick play under the main work top plywood. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top frame and base frame and legs shall be supported on ms rectangle pipe frame having cross-section area 25mm x 25mm with 1.2mm thick with powder coated. there shall be ppcp shoe provided at the bottme to avoid scetching on the floor., side unit shall be provided with the bed at both side with an overall size 450mm x 450mm x 550mm. the side unit shall be made of 18mm thick waterproof plywood with both side laminate. it shall be supplied with one sliding drawer and one open drawer., dining table with six chairs, supplying & placing dining table with six chairs an overall size 1800mm x 900mm x 750mm. the top of the table shall be made up of 18mm thick teak wood. the top profile shall be in rectangular wooden shape with the edges shall be in chamfer shape. the under structure shall have teak wood having size 75mm x 75mm round shaped legs with melamine polish.there shall be shoe provided at the bottom to avoid scratches on the floor. dinning chair. the seat shall be made of 12mm thick waterproof plywood and season/teak wood frame upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m with leatherite tapestry 0.8mm thick and 535 gsm and the back shall be made of season/teak wood malemine polish finish frame. the frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish of size 50mm x 50mm. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 41010 mm(d) x 45010 mm(w) and back size shall be 44010 mm(w) x 56010 mm(h) from seat. overall height shall be 100010 mm., providing and supplying corner table with an overall size 600mm x 600mm x 410mm. the top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. the mdf top should have decorative finish with approved veneer and pu polish accordingly. the understructure shall consist of 4 nos. of ms sheet gold leg with 6mm thick., providing and installation of large tv unit, carcass panel shall be made of 18 mm prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. drawer bottom shall be made of 12 mm thick prelaminated waterproof plywood. 4 drawer front shall be made of 18 mm thick prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. all drawers shall be fitted with knobs.top shall

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

Metal Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

corporations/Associations/Others