Web Analytics Made Easy - StatCounter

Metal Frame Tenders

Get complete information related to latest Metal Frame Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Metal Frame Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Metal Frame Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :41828823 Due date: 14 Oct, 202514 Oct, 2025 NA
Tender For corrigendum : supply of door frame metal detector (q2)

State Government

CTN :42135364 Due date: 23 Oct, 202523 Oct, 2025 NA
Tender For portable door frame metal detector

corporations/Associations/Others

CTN :41508588 Due date: 14 Oct, 202514 Oct, 2025 9.77 Crore
Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c

Central Government/Public Sector

CTN :41799867 Due date: 10 Oct, 202510 Oct, 2025 NA
Tender For corrigendum : tender for supply of crc 2-26, 300 gms self spraying aerosal for elec maintainence., nexus (germany) make, two leg puller model no. 100-1.5,, dia. 25-130mm, leg: 100mm, torque: 80nm, spindle measurements:, m14 x 1.5 x 130., residual current circuit breaker [rccb], 63a 440v rating, three phase and nuetral, sensitivity 100 milliamp trip free mechanism, touch proof terminals ip20, resistance against unwanted tripping, conforming to relevant iec/bis standard, make: siemens/l and t/ legrand/havells/ge/abb/ schneider., plug top suitable for 16 amp. flameproof. weatherproof switch socket, 3 pin (2p+1e), in lm6 (cast a1) construction for single phase switch so cket. cat.no.ss/oa/1011, make: sudhir switchgear for urea plant., black ink ribbon part no lm ir508 for ferrule printing machine model lm-550a2/pc, make max co ltd. japan, reversible 2 way screw driver, magnetic hex shank, size: 6 inch, head type: one side flat/ slotted head and one side, phillips head, holder material: plastic, blade material: steel, make: taparia 905 h/jhalani/equivalent, industrial metal clad ap20 plug top 20 amp., 250 volts, cast aluminium 3 pin, crompton make, industrial metal clad ap10 plug top 10 amp 250 volts, cast aluminium 3 pin, crompton make, battery flat 9 volt of make duracell/energizer, insulation tape type p 101 frlt tape, size: 1.9 cm x 20me roll, fire retardant type, breake down voltage 2kv make permacel., battery pencil cell 1.5 volt heavy duty everedy model no.: 1015 r6/aa/um3 guaranted upto 0.6cv eveready make, battery cell 1.5volt, make: novino national neo type-r03 nt aaa, masonary (concrete) drill bit straight shank size: 4mm., masonary (concrete) drill bit straight shank size 6mm., masonary(concrete) drill bit straight shank, size: bmm, masonary (concrete) drill bit straight shank, size: 10mm, box spanner set-24 piece socket wrench set: 1/2" square, drive set-consisting of: 1-250 reversible ratchet handle, 1-250 slidin gt-bar, 1- universal joint, 1-420 mm speeder handle, 2 extension, box spanner set gadre or equivalent reputed make containing complete set of box spanner sockets, rachets, handles and other adoptors size: 6 mm to36 mm., ink ribbon case part no lm-rc500 for ferrule printing machine model lm-550a2/pc,make max co ltd. japan, heating element zero bend type. rating-2kw, 230vac, 50hz., mocnickel chromium steel complete with 1/2" bsp fixing nut. length 1350mm, suitable for surface load 3.2/cm2. as per attached drawing., motor fan for 0.75kw, 1500 rpm, 805 frame motor., coating: the fan shall be powder coated, cooling fan moc-ms., sheet thickness shall be minimum 3 mm., motor fan for 30hp (22kw)/1500 rpm 180 1 frame motor, motor fan for 75 kw, 1500 rpm (motor of ie2 class) 280 m & 280 s motors, motor fan for 75 kw, 3000 rpm, 280 s & 280 m frame size motor, motor fan for 3.7 kw,3000 rpm, motor of iez class) 132 s frame motors, moc: cast iron, motor fan for 60hp (45kw)/3000 rpm 225 s frame motor, motor fan cover for 7.5 kw, 1500 rpm, 132 m frame size motor (motor of ie2 class), moc: ms

CTN :42120192 Due date: 13 Oct, 202513 Oct, 2025 27.76 Lacs
Tender For supplying and fixing of waste to wealth for recycling plastic products in nehru park in municipal area tonk - supplying and fixing of waste to wealth for recycling plastic products in nehru park in municipal area tonk, providing & foxing set of recycled plastic dustbin with ms frame stand and top cover capacity upto 60-60l and bin size 2 x 1 x 1 ft. bin thickness 8 mm frame thickness 8 mm weight of minimum 15 kg. and logo of nagar parishad sikar and dustbin written on two side, complete as per direction of officer incharge., providing & fixing of recycled plastic bench with thickness of 18 mm. size: 4.5 x 2.5 x 3 ft. weight loading capacity upto 300 kg. weight of bench approx 70 kg. with logo of nagar parishad tonk written on bench complete as per direction of officer incharge., providing & foxing of square recycled plastic tree guard, with thickness of 8 mm, size: 4ft x 1.3 ft 1.3 ft. with nagar parishad sikar logo on it complete as per direction of officer in charge., supply & fixing of eco friendly products toilet made by recycled waste in various places at nagar parishad tonk with all complete fittings, providing and fixing of recycled plastic peacock for show piece and beautification purposes in parks. with support of ms frame isi marked. frame of ms and covering it by lumbers made by mlp waste plastic , also screwed by ss screws. peacock in front made by metal frame internally for support and outside recycled plastic sheets. made by recycled plastic sheets termite proof , water proof , fire retardant and anti thef each lumbers size-: l-4ft, b-6 inch. thickness of recycled plastic sheets-: 8mm and 18mm used. in front flower pots size of 6 inches and big pot size of l-2ft. b-1ft. size can be variable as per officer in charge on site. also coloured as per requirement., outdoor round table (1) , chairv(4) material-post consumer plastic waste thickness-18mm waterproof, fire retardant, strong, screw holding, termite proof & anti- microbial. corrosion free, rust free, heat resistant sturdy & tough

CTN :41568088 Due date: 03 Oct, 202503 Oct, 2025 NA
Tender For bid to ras bid to ras corrigendum : supply of steel almirah , steel almirah small , fully plastic moulded chair with arms seat andback cushioned , executive table or office table , library almirah steel glass front cabinet , laboratoryor libraryorcanteen table , drawing stool , computer table , computer and printer table , steel rack , conference room table , chemistry lab table , foot rest , laboratory table with boxes , lecture stand , laboratory table with drawers , notice board , single seat sofa , three seat sofa , revolving chair big , revolving chair small "steel almirah : size:- height-1981mm, width-916 mm, depth - 486mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0.8 mm, other components the thickness should be 0.9mm and the shelf thickness should be 1.2 mm doors & handles: - the almirah should have full height steel hinged door & should be provided with handle. locking: - the almirah should be provided with 3 way locking mechanism & shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg and shelves should be 4 in number and should be fully adjustable. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a ) /bid number : gem/2025/b/6561795 * /dated: 25-08-2025 & & / bid document 1 / 35 controlled temperature of 1800c to 2000c. manufacturer/ supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached. leveler:-it should have leveler with m10 screw type leveler with hexagonal plastic base. ", "steel almirah small : size:- height 1270 mm, width 765mm, depth 440 mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0.8 mm, other components the thickness should be 0.9mm and the shelf thickness should be 1.2 mm doors & handles: - the almirah should be provided with full height steel hinged door & should have handle. locking: the almirah should have 3 way locking mechanism with shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg maximum and shelves should be 3 in number and should be fully adjustable shelves. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached leveler:- it should have leveler with m10 screw type leveler with hex plastic base ", "fully plastic moulded chair with arms (seat &back cushioned) : size - total height : 820mm + 10mm, total width : 565mm + 10mm, total depth : 565mm + 10mm &total weight: 4.20 kg + 50gms cushioned chair with arms comprising of single piece moulded frame made of polypropylene & coated with pu coating paint high gloss finish with seat & back cushion made of moulded pu foam and velvet upholstery. weight of moulded poly

State Government

CTN :42061957 Due date: 11 Oct, 202511 Oct, 2025 107
Tender For supply of rbsk and deic equipments to ddpi chikkamagaluru call 3 - lens diameter 25 mm outer, 22 mm inner(ckm), accessories 7(ckm), prisms 10 (ckm), cyl 20 pairs each(ckm), plus or minus sph 32 pairs each(ckm), consisting of 225 lenses(ckm), reduced aperture lenses fitted in anodized metal mounts golden-silver color(ckm), golden & silver with trial frame(ckm), trial lens set with wooden box.(ckm), therapy table with 2 chairs(ckm), writing pad (scribbling pad)(ckm), tea cup (plastic)(ckm), bell (pooja bell)(ckm), picture book (with 1 picture per page)(ckm), snellens chart(ckm), magnifying lens(ckm), b.p. apparatus with cuff of appropriate size(ckm), torch (appropriate size for eye examination)(ckm), stadiometer(ckm), infantometer(ckm), weighing scale (for infant)(ckm), weighing scale (for adult)(ckm), stethoscope(ckm), muac tape(ckm), head circumference tape(ckm)

State Government

CTN :42116833 Due date: 07 Oct, 202507 Oct, 2025 NA
Tender For supply of door frame metal detector (q2)

Central Government/Public Sector

CTN :42112434 Due date: 16 Oct, 202516 Oct, 2025 NA
Tender For supply of supply of civil horticulture and plumbing tools h h - trowel big , trowel small , square nose shovel , straight mild steel spade , wood handle pick axe , crow bars as per specifications , axe as per specifications , wheel barrow 160kg , wheel barrow 200kg , sledge hammer with wood handle , wooden claw hammer as per specifications , chilsel civil , wood chisel set , magnetic spirit level 0.6m , non magnetic spirit level 1.2m , plumb bob full brass , hind tools set of 3 , wooden trowel wood float , mild steel trowel float , air blower dust cleaner , corded electric diamond tile or marble cutter , handsaw as per specifications , cut flat file , angle grinder , corded electric demolition hammer , fiberglass top line measuring tape , polycarbonate tile or wood cutter machine , diesel dewatering pump , ud 30 drill driver , ud 4 drill driver , te 30 rotary hammer , te drs-m dust removal system , sl 6-22 led construction light , double sided self supporting ladder 5 step , double sided self supporting ladder 8 step , double sided self supporting ladder 14 step , corrosion resistant high strength cuplock scaffoldings , digital craft electric concrete vibrator , scissor platform , extension cord with socket , wooden hand cultivator , transparent level tube pipe 6mm diameter , aluminum tripod , straight metal drill bits set , metal drill bit set , drill and screwdriver bit set , cutting disc or wheel for metal standard flat hub , wood circular saw blade , 2.5 ton heavy duty fork lift , mobile floor crane , manual scissor table , 11 inch plastic ghamela , 21 inch stonge plastic ghamela , steel hedge shears , axes felling trade pattern , round shovel with wooden handle , handle square nose shovel , garden shears sharp cutter , hand digging trowel steel , garden pruning saw , electric lawn mower , manual lawn mower with grass catcher , bamboo handle for garden rake , electric leaf blower , plumber kit hand tool kit , carbon steel general purpose pipe wrench , professional hacksaw frame with 18 tpi blade , double sided combination wrench set , pliers set , screwdriver set , t spanner , plier , pipe wrench 24 , tap and die set , pipe threader die set , square drive hex socket set 27 pcs , square drive hex socket set 46 pcs , sly slide wrench spanners , pvc garden hose pipes , monoblock pump , pvc suction hose or pipe //bid details 2 / 64

Corporations And Associations And Others

CTN :41471442 Due date: 08 Oct, 202508 Oct, 2025 NA
Tender For corrigendum : purchase of 183 nos cctv integrated multizone door frame metal detectors and 163 nos singlezone door frame metal detectors
 Loading, Please wait...

Connect us via What's Up