Get complete information related to latest Metering Module Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Metering Module Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Metering Module Tenders.
Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent meteringmodule suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc
Tender For auction sale of mixed iron scrap,transformer meter box metallic scrap,11/12 kv vcb kiosk (incomplete) scrap,single phase meter static/ pushfit type burnt (e-waste),3.15 mva power transformer (scrap) copper wound,250 kva 3 phase al. wound dt (scrap),63 kva 3 phase al. wound dt (scrap),25 kva 3 phase al. wound dt (scrap),5 kva 1 phase copper wound dt (scrap),63 kva 3 phase dt mic failed without winding (scrap),40 kva 3 phase dt mic failed without winding (scrap),63 kva 3 phase uneconomical dt lt winding al. wound due to coil weight (scrap)
Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.
Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.
Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.
Tender For corrigendum : work contract for transportation, loading & unloading of t/f oil, distribution t/f, cable drum & line material, power t/f and 1-ph, 3-ph meters & line materials, scrap material from any pole factory to various sites, filter unit, meter testing unit & major store under rural ii division chh.sambhajinagar
Tender For auction sale of others - disposal of miscellaneous scrap released materials such as:- (1) element zink, qty=3025 kg. (2) poly carbonate lens (white) 213 x 102 mm fl, lens (yellow) 136 mm, lens (red) 140 mm, 13mm fl, lens (green)140 mm, 13mm fl, lens 101 mm green for route, lens 101 mm white, lens white, 127 x 70 mm fl, lens white 213 mm, 102 fl, lens green 92 mm, 16 fl, glass jar for ad cell, styron acrylamide nitrite (san) jar with poly polypropylene lid for awe- z type cell, bulb lamp elect. 12v/25w (3 pin), bulb 12v/33w, qty=1898 kg. (3) tag block, tape steel, tape metallic, tape measuring steel, p g clamp, current regulator, 8 way barrier terminal, digital insulation tester, solar panel, 4w/2w combined potable control telephone, indicator disc type 1000 ohm, c spike, a binding wire, 2 wire cnl telephone, digital multi meter (defective), digital tough tester, 10 swg wire, spray gun (broken), earth tester, power meter with sensor, qty=40 kg. (4) set square paratone 60-45, set square paratone 45-4, pvc flexible pipe 20 mm, fiber optical cable assembly, pvc cable channel 15 mm (plastic), qty=10 kg. (5) double ply tent soldries size 12 x 12, soldries single fly tent 12x12x2"x2", banner flag red, flag hand signal red, flag hand green, qty=221 kg. (6) transformer u type, transformer of sorts, signal transformer 110/12v, 40va, transformer 110/110v, 150 va, transformer 300v/12v, 40va, transformer 110/300 v, 60va, transformer 300 v/100v, 150 va, transformer 110v/300v, 150 va, qty=1371 kg. (7) voltage regulator 5 kva (broken & damaged), qty=01 no. (8) voltage regulator 3 kva (broken & damage), qty=01 no. (9) battery charger of shorts, qty=08 nos. (10) 3 pole lamp holder w/o base, lamp harrican, 3 pole lamp holder with base, lamp petromax baby, 3 pole lamp 12v/24w, hand signal lamp, qty=2604 nos. (11) ct box 100 pair, qty=01 no. (12) relay ac 4f/b, (self type), relay non ac, 4f/b, 2f/b(self type), qty=125 nos. (13) relay ecr lamp proving (on aspect) qecx-51, qty=40 nos. (14) relay ecr lamp proving (off aspect) qecx-52, qty=118 nos. (15) relay plug in type dc-track qt2, qty=108 nos. (16) relay plug in type qt1, qty=19 nos. (17) over load relay with time delay of 69 sec (timer 1010), qty=85 nos. (18) relay p1-150 & 150a, (4f/2b, 4f/1b), 24v dc, qty=532 nos. (19) relay of sorts timer relay, relay qucx-1, relay qsra1(8f/8b), esra-1 (8f/4b), relay qfpr1, qty=733 nos. (20) dc track relay rtd 02-0.5v (hm) 2f/b, qty=78 nos. (21) relay thermal time element (2f/1b), qty=47 nos. (22) relay point contractor nr/or (gn), qty=240 nos. (23) plug board nr/or, hv relay, qty=165 nos. (24) relay p-p1 style 2f/1b)(24 pin per relay), qty=24 nos. location:- dhanbad store (gd-i & ii) & re store under sse/sig/w/dhn.