Latest metering skid Tenders | Government metering skid Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45714895

18 Jul, 2026 NA

Pune - Maharashtra

Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

CTN :45478137

01 Jul, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : items - computer and servises and otheres, mcb (miniature circuit breaker), acb (3200a/4000a ), acb (air circuit breaker), allen key set, amf relay, ammeter, annunciation system, anti-corrosion spray, arc flash suit, arc flash suit (ht/lt panel ), auxiliary contacts, avr (automatic voltage regulator), battery charger, blower/air blower, breather assembly, bus coupler acb, busbar insulators, busbar supports, cable glands, cable glands, cable lugs, cable ties, cable ties, changeover switch, clamp meter, clamp meter, combination pliers, consumables, contact cleaner spray, contactor, continuity tester, control cable, control fuses, control relay, control wires, cooling fan, copper busbar, crimping tool, ct (current transformer), current transformer (ct), dg set synchronization panel (3 750 kva), digital multimeter, digital multimeter, discharge rod, earth fault relay, earth switch, earth tester, earthing rod, electrical contact cleaner, electrical gloves (11 kv rating), electrical safety gloves, emergency stop switch, energy meter, engine control module, face shield, ferrules, ferrules, flexible wire, frequency meter, fuse fuse base, heat shrink sleeves, heat shrink tubes, hrc fuse, hrc fuses, ht protection relay, indicator lamps (r/y/b), infrared thermometer / thermal camera, insulated screwdriver, insulation tape, isolator switch, lightning arrester, load sharing module, lockout-tagout (loto) kit, loto kit, lt pcc/mdb panel, lubricant spray ( ), lugs, maintenance tools, mccb, mccb (molded case circuit breaker), megger (insulation tester), megger 5 kv, microfiber cloth, motorized mechanism, multifunction meter, multifunction meter, nose pliers, numerical protection relay, oti (oil temperature indicator), over current relay, overload relay (olr), phase sequence meter, phase sequence tester, plc module, power analyzer, power cable, power factor meter, protection & metering, pt/vt (potential transformer), push buttons (start/stop), pvc insulation tape, reverse power relay, rust remover, safety equipment, safety goggles, safety helmet, safety helmet, safety shoes, safety shoes, screwdriver set, secondary injection test kit, selector switch, shunt trip coil, side cutter, silica gel, smps (power supply), soft brush, spanner set, speed governor module, spiral wrapping, spring charging motor, starting relay, synchronizing relay, terminal blocks, thermal camera, thermostat, timer relay, torque wrench, transformer buchholz relay, transformer oil, under/over frequency relay, under/over voltage relay, uv coil, vacuum cleaner, vcb (vacuum circuit breaker), voltage tester, voltmeter, wire markers, wire stripper, wti (winding temperature indicator), , , , comprehensive maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor & majour spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete., annual maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete.

corporations/Associations/Others

CTN :45653665

30 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For auction sale of tvm meter scrap (lt) static (e-waste),tvm meter scrap (ht) static (e-waste),11 kv ctpt set scrap (assorted ratio),11 kv pt scrap (a/s),metering instrument scrap,rubber tyre scrap assorted size,rubber tyre scrap 900-20,rubber tyre scrap 750-16,rubber tyre scrap 600/16 (lcv),rubber tyre scrap 165/65 (jeep),fork lifter tyre a/size,vehicle battery 12 v u/s scrap (pcb applicable),ups battery scrap (pcb applicable),computer monitor scrap (e-waste),cpu scrap (e-waste),type writter scrap (e-waste),scrap modem (computer networking),dot matrix printer scrap (e-waste),fax machine scrap,photo copy machine (scrap),electric motor 1 hp scrap,meter testing bench (three phase),meter testing bench (energy meter repair),scrap rotary

corporations/Associations/Others

CTN :45636803

25 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For auction sale of tvm meter scrap (lt) static (e-waste),tvm meter scrap (ht) static (e-waste),11 kv ctpt set scrap (assorted ratio),11 kv ct scrap,metering instrument scrap,rubber tyre scrap assorted size,rubber tyre scrap 750-16,rubber tyre scrap 600/16 (lcv),rubber tube scrap assorted size,fork lifter tyre a/size,vehicle battery 12 v u/s scrap (pcb applicable),scrap laptop (e-waste),mccb assorted ratio scrap three phase,ups battery scrap (pcb applicable),capacitor bank scrap,computer monitor scrap (e-waste),cpu scrap (e-waste),keyboard scrap (e-waste),vaccum cleaner scrap,projector scrap,printer scrap (e-waste),dot matrix printer scrap (e-waste),fax machine scrap,scrap computer mouse,scrap scanner,empty drum c/d class,meggar scrap,cmri scrap,ceiling fan

State Government

CTN :44997863

19 Jun, 2026 20.00 Lacs

Aligarh - Uttar Pradesh

Tender For bid to ras corrigendum : supply of carriage of pcc and stp poles 8.5, 11 and 13 mtr , carriage of line material , erection of pcc and stp poles 8.5, 11 and 13 mtr , erection of double poles 8.5, 11 and 13 mtr , installation and fixing of 11 kv tpmo. , erection and grouting of stay set , providing and fixing of insulator , laying of acsr weasal, rabbit and dog conductor. , erection of abc conductor , grouting of pcc and stp poles , making of plinth , fixing of earthing rod , chopping of tree branches , providing and fixing of clamps of lt , providing and fixing , carriage and installation of 25 kva transformer , carriage and installation of 63 kva transformer , carriage and installation of 100 kva transformer , carriage and installation of 400 kva transformer , dismantling of old pcc and stp poles , dismantling and removal of conductor , erection of section tee pole , carriage and installation of lt dist box , provding and fixing, filling cable joints , safe carriage of cables , laying of under ground cable , laying of overhead cable , guarding of 11 kv line by gi wire , safe carriage and installation of metering unit , safe carriage and installation of metering cubicle , provding and fixing wearing gi pipe

CTN :45563739

03 Jul, 2026 NA

Multi City - Multi State

Tender For pcocurement of islz105p153ab pellitiser spares - support f/brg unit sandvik 32921 e dsx1, brg deep groove 8 sandvik islz105abc, bucket conveyor sandvik 106363 dsx1, cam control sandvik 11 dsx1, chain wheel,fixed sandvik dsx1, chain wheel,loose/fixed sandvik dsx1, chain wheel loose/fixed sandvik 6 dsx, wheel chain f/brg unit 32914 svkdsx1, hub slip f/drive sandvik 4820 dsx1, link connecting sandvik 04.983960 dsx1, o-ring f/bearing unit sandvik 27501vdsx1, o-ring f/bearing unit sandvik 2487e dsx1, o-ring f/brg unit sandvik 33255edsx1 1, o-ring f/bearing unit sandvik 28561edsx1, ring counter sandvik 32919e dsx1, ring sealing f/brg unit sandvik 267vdsx1, star lock 19mm gal sandvik 1236 dsx1, nozzle assy prediv 7 sandvik islz105abc, o-ring 10 sandvik islz105abc, ring sealing 8 sandvik islz105abc, seal shaft 7 sandvik islz105abc, nozzle 3 sandvik islz105e160abc, o-ring 11 sandvik islz105abc, knife sandvik 13361 dsx1, lamella f/water scrapper sandvik dsx1, seal wo spring pred nozzle sandvik dsx1, roller chemical sandvik 11 dsx1, curtain pvc 19 sandvik islz105e160abc, nozzle ecc 18 sandvik islz105e160abc, kit spare 069305 069310 sandvik islz105, gasket set 400.01 sandvik islz105p153ab, gasket set 400.02 sandvik islz105p153ab, gasket set 400.03 sandvik islz105p153ab, gasket set 400.04 sandvik islz105p153ab, gasket set 400.05 sandvik islz105p153ab, gasket set 400.06 sandvik islz105p153ab, gasket set 400.07 sandvik islz105p153ab, gasket set 400.08 sandvik islz105p153ab, gasket set 400.10 sandvik islz105p153ab, knife disch 2 sandvik islz105e160abc, blade scrpr 3 sandvik islz105e160abc, brush 5 sandvik islz105e160abc, blad clnr puley 2 sandvik islz105e160abc, spring ten l 8 sandvik islz105e160abc, curve delivery sandvik dsx1, filter 20 sandvik islz105e160abc, bar metering lv sandvik 56397 dsx1, o-ring f/casting body sandvik 2491e dsx1, roller chain f/drive sandvik 430 dsx1, wheel chain sandvik 6333 dsx1, blade squeg 3 sandvik islz105e160abc, support ring 1 sandvik islz105e160abc, support roller 2 sandvik islz105e160abc, brg deep groove 9 sandvik islz105abc, brg deep groove 5 sandvik islz105abc, o-ring f/brg unit sandvik 33255edsx1 2, vlv plug 2way rotoformer ipco islz105, brg unit assy 024072 ipco islz105abc

Central Government/Public Sector

CTN :45519097

17 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For corrigendum : mandatory spare for patratu esp and sbmcc - acp 4000a, 0-25a, ctr 25/1a, 0-50a, ctr 50/1a, 0-75a, ctr 75/1a, nr_ i/c, dae_b/c_dae o/g, coupling relay _ 220v dc, support insulator _main bb, "support insulator_ vrtical bb", "spring charging mtr(2000a-4000a)", aux. contacts (2000a-4000a), "position ind switch (2000a-4000a)", "spring chrgd ind. switch 2000-4000a", trip ind. switch 2000-4000a, aru chute 4000a, fixed contact set 4000a, moving contact set 4000a, arcing contacts 4000a, charging spring 2000a to 4000a, ct metering 25/1a, ct metering 50/1a, ct metering 75/1a, ct protection 4000/1a, ct ps class 4000/1a, closing coil 2000-4000a, trip coil 2000-4000a, pt 415 3/110 3,50 va, cst 2.0 kva, cst 3.0 kva, cst 250 va, power cntr 25a_240vac, power cntr 16a_110vac, power cntr 32a_110vac, power cntr 115a_110vac, pc coil 25a_240vac, pc coil 16a_110vac, pc coil 32a_110vac, pc coil 115a_110vac, sfu 63a, sfu 125a, mccb 250a, mccb 400a, "double pole on/off switch_220vdc", "2p,2posi,l/r selector switch", "double pole on/off switch_240vac", "sp on/off switch for motor space htr", "4p 2posi,selector switch_240vac", "4p,2posi, a/m selector switch", "4p,2posi,selector switch_110vac", "double pole on/off switch_space htr", sp on/off switch for socket, ammeter selector switch, control fuse 6a, control fuse 10a, control fuse 16a, control fuse 63a, neutral link 20a, neural link 32a-63a, neutral link 200-400a, ind.lamp _red _110vac, ind. lamp _green _110vac, ind lamp _blue _110vac, ind lamp _red _220vdc, ind. lamp _green _220vdc, ind.lamp _red _240vac, ind.lamp _yellow _240vac, ind. lamp _blue _240vac, ind. lamp _green _240vac, ind. lamp _amber _240vac, ind. lamp _red _415vac, vertical bb dropr support insulator, push button, power fuse 6a, power fuse 16a, power fuse 25a, power fuse 32a, power fuse 63a, power fuse 125a, olr1.0-1.6a, olr 2.5-4.0a, "ind. lamp hldr _green_220vdc", ind. lamp hldr _red_220vdc, "ind. lamp hldr _amber_240vac", ind. lamp hldr _red_110vac, "ind. lamp hldr _blue_110vac", "ind. lamp hldr _green_110vac", busbar al flat piece_150x6, busbar angle _4000a, terminal block fixed, 32 pinmale housing tb, 32 pin female housing tb, 40 pinmale housing tb, 40 pin female housing tb, 16 pinmale housing tb, 16 pin female housing tb, spanner set., screw driver set., nose player, insulation tape, wire cutter, tester, ammeter 10/1a, voltmeter 0-500v, nr_ i/c, dae_b/c_dae o/g, support insulator _main bb, support insulator_ vrtical bb, ct metering 10/1a, ct metering 5/5a, pt 415 3/110 3,50 va, cst 2.5 kva, power cntr 16a_110vac, pc coil 16a_110vac, isolator switch 25a, ammeter selector switch, 4p,2posi,selector switch_110vac, double pole on/off switch_space htr, sp on/off switch for socket, voltmeter selector switch, control fuse 6a, control fuse 16a, control fuse 25a, neutral link 20a, ind.lamp _red _110vac, ind lamp _blue _110vac, ind.lamp _yellow _240vac, ind. lamp _blue _240vac, ind. lamp _red _415vac, vertical bb dropr support insulator, olr 0.4-0.63a, olr1.0-1.6a, olr 1.6a-2.5a, olr 0.63-1.0a, ind. lamp hldr _red_415vac, ind. lamp hldr _red_110vac, ind. lamp hldr _blue_110vac, ind. lamp hldr _yellow_240vac, busbar al flat piece_50x6, terminal block fixed, 32 pinmale housing tb, spanner set., screw driver set., nose player, insulation tape, wire cutter, tester

State Government

CTN :45252221

18 Jun, 2026 20.00 Lacs

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of carriage of pcc and stp poles 8.5, 11 and 13 mtr , carriage of line material , erection of pcc and stp poles 8.5, 11 and 13 mtr , erection of double poles 8.5, 11 and 13 mtr , installation and fixing of 11 kv tpmo. , erection and grouting of stay set , providing and fixing of insulator , laying of acsr weasal, rabbit and dog conductor. , erection of abc conductor , grouting of pcc and stp poles , making of plinth , fixing of earthing rod , chopping of tree branches , providing and fixing of clamps of lt , providing and fixing , carriage and installation of 25 kva transformer , carriage and installation of 63 kva transformer , carriage and installation of 100 kva transformer , carriage and installation of 400 kva transformer , dismantling of old pcc and stp poles , dismantling and removal of conductor , erection of section tee pole , carriage and installation of lt dist box , provding and fixing, filling cable joints , safe carriage of cables , laying of under ground cable , laying of overhead cable , guarding of 11 kv line by gi wire , safe carriage and installation of metering unit , safe carriage and installation of metering cubicle , provding and fixing wearing gi pipe

State Government

CTN :45292364

20 Jun, 2026 10.00 Lacs

Etah - Uttar Pradesh

Tender For corrigendum : supply of safe carriage of pcc pole , safe carriage of st pole , cartage of line material , erection of pcc pole , erection of st pole , erection of doubel pcc pole , erection of stay set , erection of earthing rod , safe carriage of xlpe cable , erection of cable , erection of xlpe cable , erection of conductor , erection of ab cable , erection of tf , safe carriage of 11 kv pilfer proof metering cubicle , erection of 11 kv pilfer proof metering cubicle , guarding of 11 kv line , cutting and chopping of tree , providing and fixing of dp clamps , safe carriage of 11 kv ct pt , erection of 11 kv ct pt , safe carriage of lt distribution box , fencing of 250 kva tf , plinth of 250 kva tf , safe carriage and installation of 250 kva tf , providing and fixing of nut bolt , providing and fixing of holding clamps , safe carriage and installation of 11 kv pilfer proof cubical

Metering Skid Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors