Latest micro controller Tenders | Government micro controller Tenders

Central Government/Public Sector

CTN :45730870

17 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of complete set of micro controller based electronic speed indicating and recording system for tower wagon car working voltage 110,maximum speed 160kmph. make : medha as per rdso spec no mp.0.3700-07 rev 07, aug 2017. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45731673

07 Jul, 2026 NA

Etawah - Uttar Pradesh

Tender For supply and installation of multipurpose programmable digital timer for exhaust fan,ceiling fan & luminaries(digital display lcd model) lcd model latest intelligent micro controller based technology program-1 hr to 24 hrs with 30 amps heavy duty 2 relay output auto/manual facility. make dynamic or similar [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736437

14 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply of ntc sensor, 5k @25 deg-c, operating temperature 40 deg.c to 140deg.c, with two metre teflon wire, suitable for micro processor controllers of lhb rmpu ac unit confirming to rdso spec-rdsope/spec/ac/0139-2009 (rev 1), make - us sensors (littlefuse)/ amphenol/ vishay/ thermosen/ betatherm/ sysaid/ jr sensing and electronics technology/ polo/ semitic only. (to be procured from rdso approved sources of microprocessor controller or their authorized dealers (uvam item code- 3100369)). [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736237

02 Jul, 2026 NA

Katni - Madhya Pradesh

Tender For supply, installation & commissioning of pressure switch, part no. 88290003-806 & microprocessor controller part no. 88292036-888, make - hitachi sullair genuine parts. for sullair electric screw air compressor, cap.-500 cfm, model-ls20-125hh (air cooled), qty. - 01 no. each item in set. [ warranty period: 6 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736389

09 Jul, 2026 NA

Madurai - Tamil Nadu

Tender For isi marked energy efficient bee 5star rated bldc ceiling fan 1200mm sweep with 3 blades suitable to operate in 230v, 50hz ac supply with 2 canopies and 300mm down rod. 1. power consumption (maximum): 28w 2. voltage range: 165 to 285 volts. 3.air delivery (minimum): 235cum/min 4. replacement warranty (minimum): 5 years 5. power factor (minimum): 0.9 6. total harmonic distortion (maximum): 10% 7. rated service value (in m3/min/watt): 8.4 8. special features: ir remote 9. availability of performance and type test report from govt. lab. nabl/ilac: as per is:374:2019 or latest. 10. the fan should comply to is: 374:2019 or latest. 11. blade thickness: 1.1mm 12. blade material: aluminium 13. bearing: double ball bearing 14. shank thickness (min): 2mm 15. shackle thickness (min): 2mm 16. rated speed (rpm): 350 rpm 17. copper winding insulation class: class f 18. preferred colour: white/brown/cream/ivory 19. preferred makes: atomberg, havells, crompton, orient, activa, bajaj warranty: 5 years, is specifications (a) is: 616/2010 for safety requirement for electronic equipment. (b) is: 374/2019 performance test for air delivery as per cl. no 10.3 of specification. test report: the firm has to submit type test report from government accredited test labs like nabl/cpri etc. [ warranty period: 60 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45744180

16 Jul, 2026 NA

Ajmer - Rajasthan

Tender For micro controller based electronic speed

CTN :45739513

09 Jul, 2026 NA

Udhampur - Jammu And Kashmir

Tender For supply of ic amp op dual fet soic 8 , card assy tx switch 1 point 2 ghz , panel electronic circuit comp acce h w c dimm comm , a7 fh syscon , ic lp dual orational amplifier lm 158 d , microcircuit linear type lp2951cm , micro controller 16f877a , regulator lm 7805a , bridge rectifier br68 , compressed gas nitrogen technical , eh misc servo driver efr 28 oblique 10 , switch solid state mw wg 10 500 mh

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45726066

31 Jul, 2026 25.00 Lacs

Tikamgarh - Madhya Pradesh

Tender For inviting rates of electrical and repair material for financial year 2026-27 at nagar palika parishad tikamgarh - inviting rates of electrical and repair material for financial year 2026-27, approved and suitable make led driver for led street lights 50watt, color temp 3000-6500k, approved and suitable make led driver for led street lights 60watt, color temp 3000-6500k, approved and suitable make led driver for led street lights 90watt, color temp 3000-6500k, approved and suitable make led driver for led street lights 120watt, color temp 3000-6500k, approved and suitable make led driver for led street lights 150watt, color temp 3000-6500k, approved and suitable make led driver for led flood lights 150watt, color temp 3000-6500k, approved and suitable make led driver for led flood lights 200watt, color temp 3000-6500k, 100w led metal core printed circuit board (mcpcb) commonly used for high-power floodlights or street lights jps 3105 90w 08 5810c 2100w ytba0106 170513, led metal core printed circuit board (mcpcb) used for low power street lights marked ccc- 14679 160x100 mm- 2835-100sc, ip66, fluorescent tube rod 36/40 watts isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, fluorescent electronic ballast chock 36/40 watts isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, fluorescent tube rod side holder isi marked of approved make as required as per specification, anchor, reputed make equivalent`, ignitor 70/125/150/250/400 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour lamp 150 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour chock 150 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapoursodium vapour porcelain holder 150 watt e40 isi marked of approved make as required as per specification, anchor, finolex reputed make equivalent`, sodium vapour lamp 250 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour chock 250 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour sodium vapour porcelain holder 250 watt e40 isi marked of approved make as required as per specification, anchor, finolex reputed make equivalent`, sodium vapour lamp 400 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour chock 400 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour sodium vapour porcelain holder 400 watt e40 isi marked of approved make as required as per specification, anchor, finolex reputed make equivalent`, led bulb 9 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, led bulb 18 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, led bulb 23 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, led bulb holder for 9w/18w/23w isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, 18w led tube rod integral tube fitting complete as required marked reputed make havels, philips . rr, c&s, surya etc equivalent, tape roll steel grip roll isi marked, universal clamp with bracket complete for tube light fixture / any street light universal iron clamp 300mm pipe length 25.4 mm dia. with bracked nut bolts complete as required as per specification, universal clamp with bracket complete for tube l

CTN :45549142

06 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of micro controller logic card no. 4 ( mlb 2) of cel make for ssdac as per rdso spec. rdso/spn/177/2012 ver 3 or latest. make-cel. [ warranty period: 30 months after the date of delivery ] ]

Micro Controller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector