Latest mild steel sheet Tenders | Government mild steel sheet Tenders

Central Government / Public Sector

CTN :45702507

06 Jul, 2026 NA

Multi City - Telangana

Tender For auction sale of rolling stock - coaches - scrap cond. under aged/over aged, burnt bg 8-wheeler icf/rcf/beml/lhb coaches without wheel sets cum trolleys and other mechanical, electrical rc items. coach nos are (1) 93736 re, 2] 037106 wgaccn, 3] 997424 gs, 4] 997728 gslr, 5] 05410 c gs, 6] 216660 ls, 7] er218640 lvph, 8] nr 215392 lvph. ds-8 nos 013778-25-37431,37427 dt. 12.03.2026, 013778-25-35481, 35474, 35485, 35491,35456, 35454, dt.25.02.2026. total weight of 08 coaches - 198.6719 mt approx. [ms-120.7286 mt approx., aluminum=5.0007 mt approx., copper=0.1997 mt approx, ss=2.327 mt approx., decolums, compreg sheet, wool and limpet, berths, seats and rexene=13.2 mt approx., corten/mild steel-26.3195 mt approx., ss ferritic 409 m-24.6026 mt approx., ss austenitic 304 -6.2938 mt approx.,]. loc- lying on the track at tata siding mly. note- 1] the purchaser is strictly instructed to stack all the rc items at one location well away from the cut-up parts of the coaches and the custodian is advised to lift the same on the day of delivery affected. [before affecting/ commencing/starting of the delivery itself]. 2] the purchaser is responsible for providing adequate safety firefighting equipment on the spot at the time of cutting and delivery. the purchaser shall be liable to make good any damage/loss caused to railway property during cutting or delivery. 3] railways are not responsible for any shortage. 4] any reclaimable items found in excess to the below, at the time of cutting and delivery of coaches should be returned to railways 5] the purchaser is instructed to remove all debris arising from cutting of the lot purchased, from the cutting/loading spot and keep the delivery spot neat and clean before the final lorry delivery, failing which, the final lorry will be stopped. 6] it is advised that all witnessing officials has to sign the debris clearance certificate at the time of closing delivery order. 7) delivery by number basis.8] as per railway boards letter dt.23/12/2021, 3 days advance intimation is to be given to rpf for witnessing of deliveries. the same has been reiterated by dsc/rpf/sc vide letter dated 22/09/2025. firms are therefore requested to take this period into consideration while uploading their requests for delivery so that deliveries are completed on time, well within the fdp.9] free delivery period of 80 days is approved by cmm/t vide note no.6 dt.2/06/2026 in e-file no.559446. pl no. 98111061. hsn code 72042910. available under sse cnw sc, state tg dist. hyb

Central Government/Public Sector

CTN :45691474

08 Jul, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - miscellaneousllaneous ferrous scrap- coach cutting, ferrous scrap, various types of safety guards, jalies bracket, m.r. tanks, liner, cylinder, dies, punches, almirah, racks, bins, pallets, air maize, car body cyclone fitter, benches, panels, cut pieces of bogie frame and component and machine parts, gear, desk, channel sheet, cut pieces, battery boxes, patties, pipes, pipe fittings, strips, angles, empty drums, wire mesh, wire coils, studs, bars, nut and bolt and other various miscellaneousllaneous ferrous scrap with or without minor non ferrous attachment. ( excluding stainless steel and aluminum ) note: 1. cutting will be allowed. 2. re-punching with other lot will not be allowed. 3. loading will be start at 09.00 a.m. 4. loading after 15.00 hrs. will not be allowed.

Central Government/Public Sector

CTN :45691476

08 Jul, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - miscellaneousllaneous ferrous scrap- coach cutting, ferrous scrap, various types of safety guards, jalies bracket, m.r. tanks, liner, cylinder, dies, punches, almirah, racks, bins, pallets, air maize, car body cyclone fitter, benches, panels, cut pieces of bogie frame and component and machine parts, gear, desk, channel sheet, cut pieces, battery boxes, patties, pipes, pipe fittings, strips, angles, empty drums, wire mesh, wire coils, studs, bars, nut and bolt and other various miscellaneousllaneous ferrous scrap with or without minor non ferrous attachment. ( excluding stainless steel and aluminum ) note: 1. cutting will be allowed. 2. re-punching with other lot will not be allowed. 3. loading will be start at 09.00 a.m. 4. loading after 15.00 hrs. will not be allowed.

corporations/Associations/Others

CTN :45668890

25 Jun, 2026 NA

Yavatmal - Maharashtra

Tender For auction sale of scrapped pl.carboy 050 / 060 ltr- item code: 74,scrapped pl. carboy 100 ltr - item code :- 73,scrapped pl carboy 200 ltr - item code :- 72,scrapped pl. carboy 025 / 035 ltr item code : 75,scrapped pl. carboy 025 / 035 ltr (black colour) - item code: 120,scrapped plastic -- coloured sheet mmhdpe item code :- 123,scrapped plastic sheet ldpe(black coloured) item code : 196,scrapped gunny wrapper (plastic) item code : 117,scrapped plastic patti green- item code: 104,scrapped plastic yarn seperator item code : 124,scrapped m s drum 210 ltr item code :- 65,scrapped rubber belt of fsg m/c item code :- 86,scrapped m. s. annelled wire imported/local item code :- 54,scrapped ms scrap item code :- 82,scrapped ms scrap item code :- 82,scrapped gi scrap item code :- 81,scrapped aluminum scrap item code :- 80,scrapped mix m s scrap item code :- 144

Central Government/Public Sector

CTN :45329483

29 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

Central Government And Public Sector

CTN :45675459

30 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot non ferrous scrap - lot of scrap non -ferrous items consisting of various type or sizes and short and sizes,diffrent thickness scrap aluminum,aluminium sheet,aluminium roof sheet, cut peices of aluminum, chair parts,aluminum duct,cut peices of coach floor, long aluminium sheet of electrical mechanical ohe and coaching items etc. with or without slightly iron and other attachment.as available in the lot. (p.l. no-98230013)

CTN :45347844

01 Jul, 2026 NA

Eluru - Andhra Pradesh

Tender For corrigendum : supply of continuous (piano) hinge type ii nom size 40, length 396, material-mild steel sheet / 5340016756 , continuous (piano) hinge type ii nom size 40, length 478, material-mild steel sheet / 5340016761

State Government

CTN :45647482

02 Jul, 2026 84.24 Lacs

Bhiwadi - Rajasthan

Tender For supply of fire fighting tools and equipments - half body harness, full body harnessfull body harness in double colour , 44mm chest strap with single dorsal d ring confirms to is standard./ en approved with 1.8m three strand polyamide rope with scaffold hook., fireman sefty goggles (full shied) isi marks is-5983, fire delivery hose b type (5000 mtr) 30 mtr length with male/female coupling ss (isi marks) delivery hose b type working presser 7kg hydro test 12kg, afff foam 3% ul tested hs-38130000 20 litre can, dragon torch light (isi marks) 1 km. length multipurpose useechargeable lithium battery; operating time 8 hrs; ip65 waterproof; shock resistant body; charger included., auto fire off /fire ballautomatic activation at 70 c 10 c; suitable for class a/b/c fires; weight approx. 1.3 kg; audible alarm; shelf life 5 years., fire man gloves (isi marks) is 16874:2018, fire man gumboots (isi marks) 90 f bisi-14128, fire man axe (isi marks) 33000 voltes tested 926 (1985), electrical hand gloves (isi marks) 11000 voltes tested isi -6994 part -1 1973 en-60903, fire proximity 3 layered suit isi -16890:2018 en 469:2020, abc type fire extinguishers 4 kg capacity isi -15683, co2 type fire extinguishers 4.5 kg capacity isi -2171, foam type fire extinguishers 9 ltr capacity (isi marks) is 15683, scba set with light weight carbon composite cylinder 300 bar en approved carbon fiber vs aluminum vs titanium 6 ltr 300 bar msa drager sect company an si 2882, safety net isi -11057 bhart, fire man helmet (isi marks) ansi z -2.89 and is 2925-1984, fire bitter with bamboo,fire beaters specification conforming to is:8096 latest, handle length 800 millimeterhandle diameter 30 5 mm, fire beater blade size 452 mm x 352 mm,mild steel sheet for shank mild steel sheet for shank conforming to is 1079, fire delivery hose b type 15 mtr length with male/female coupling ss (isi marks) delivery hose, stretcher,foldable aluminium alloy frame; load capacity 150 kg; safety belts provided; portable design.material of the stretcher frame- aluminium ,stretcher length 200-220,, multipurpose branch,fire service standard.is: 2097 (latest)types and respective discharge rate as per cl 4 and 6-1 (table -1) of is 2097fb 10x (jet), fireman dangri suit, the finished fr overall (dangri) shall be certified to the following international governing standards(i) en iso 11611 - 2007(ii) en iso 11612 - 2008, short branch, aluminium alloy construction; is:903 latest, combi tool ( battery operated),hydraulic rescue tool; cutting, spreading & pulling functions; battery operated; ip54 protection; spare battery, charger & carrying case included; conformity to standards (nfpa 1936 with latest amndmnt),highest spreading force (hsf)in kn 1500, lowest spreading force(lsf) in kn 30,material of cutter of blade(dropped-forged special steel alloy)availability of test reports from central govt /nabl / ilac accredited lab covering all the parameters(yes),copy of test reports and certifications to be provided to buyer on demand at time of supplies,cutting class of combitool a7,b8,c7,d8,e7,type of battery lithium ion based rechargebale

corporations/Associations/Others

CTN :45653686

07 Jul, 2026 NA

Thrissur - Kerala

Tender For auction sale of steel flashes and piercings,shot blast dust,steel turnings and borings with mud,steel turnings and borings without mud,titanium turnings and borings,titanium flashes,titanium rejected forgings,aluminum flashes,aluminum end cuts,miscellaneous scrap,scrapped ss roof ventilators,rejected forgings,rejected drive wheels,empty and broken 210 ltr metal drum,scrapped cast iron doors,scrapped carbide rotary burr cutter,scrapped carbide cnc inserts,used carton boxes,scrapped chain sling,broken and damaged brass shim/sheet,broken and damaged copper shim/sheet,scrapped brass sleeve

State Government

CTN :45640202

02 Jul, 2026 84.24 Lacs

Alwar - Rajasthan

Tender For supply of fire fighting tools and equipments -0 half body harness , full body harness full body harness in double colour, 44mm chest strap with single dorsal d ring confirms to is standard./ en approved with 1.8m three strand polyamide rope with scaffold hook. , fireman sefty goggles (full shied) isi marks is-5983 , fire delivery hose b type (5000 mtr) 30 mtr length with male/female coupling ss (isi marks) delivery hose b type working presser 7kg hydro test 12kg , afff foam 3% ul tested hs-38130000 20 litre can , dragon torch light (isi marks) 1 km. length multipurpose useechargeable lithium battery; operating time ≥8 hrs; ip65 waterproof; shock resistant body; charger included. , auto fire off/fire ballautomatic activation at 70°c ±10°c; suitable for class a/b/c fires; weight approx. 1.3 kg; audible alarm; shelf life ≥5 years. , fire man gloves (isi marks) is 16874:2018 , fire man gumboots (isi marks) 90' f bisi-14128 , fire man axe (isi marks) 33000 voltes tested 926 (1985) , electrical hand gloves (isi marks) 11000 voltes tested isi-6994 part-1 1973 en-60903 , fire proximity 3 layered suit isi-16890:2018 en 469:2020 , abc type fire extinguishers 4 kg capacity isi-15683 , co2 type fire extinguishers 4.5 kg capacity isi-2171 , foam type fire extinguishers 9 ltr capacity (isi marks) is 15683 , scba set with light weight carbon composite cylinder 300 bar en approved carbon fiber vs aluminum vs titanium 6 ltr 300 bar msa drager sect company an si 2882 , safety net isi-11057 india , fire man helmet (isi marks) ansi z -2.89 and is 2925-1984 , fire bitter with bamboo, fire beaters specificationconforming to is:8096 latest, handle length800 millimeter handle diameter30±5 mm, fire beater blade size452 mm x 352 mm, mild steel sheet for shankmild steel sheet for shank conforming to is 1079 , fire delivery hose b type 15 mtr length with male/female coupling ss (isi marks) delivery hose , stretcher, foldable aluminium alloy frame; load capacity ≥150 kg; safety belts provided; portable design. material of the stretcher frame- aluminium, stretcher length 200-<220, s , multipurpose branch, fire service standard.is: 2097 (latest) types and respective discharge rate as per cl 4 and 6-1 (table -1) of is 2097 , fb 10x (jet) , fireman dangri suit, the finished fr overall (dangri) shall be certified to the following international governing standards , (i) en iso 11611 - 2007 , (ii) en iso 11612 - 2008 , short branch, aluminium alloy construction; is:903 latest , combi tool (battery operated), hydraulic rescue tool; cutting, spreading & pulling functions; battery operated; ip54 protection; spare battery, charger & carrying case included; conformity to standards (nfpa 1936 with latest amndmnt), highest spreading force (hsf)in kn 1500, lowest spreading force(lsf) in kn 30,material of cutter of blade(dropped-forged special steel alloy)availability of test reports from central govt /nabl/ilac accredited lab covering all the parameters(yes), copy of test reports and certifications to be provided to buyer on demand at time of supplies, cutting class of combitoola7,b8, c7,d8, e7, type of batterylithium ion based rechargebale

Mild Steel Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors