Latest mild steel sheet Tenders | Government mild steel sheet Tenders

CTN :44379367

23 Mar, 2026 9.99 Lacs

Khurda - Odisha

Tender For corrigendum : supply of brackets 10 ltr capacity, flushing cistern si18316 , health faucet , india rubber washers for pillar taps, bip taps etc 20mm dia and under , india rubber washers for pillar taps, bip taps etc exc 20mm dia but not exc 32mm , 0. 50 inch float valve , 0. 75 inch float valve , 1 inch float valve , 0. 50 inch gate valve, stop valves, castcopper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed , 0. 75 inch gate valve , 1 inch gate valve , stainless steel wire cloth 0. 36mm normal dia of wire and average width of aperture 1. 40mm and fixed with stainless steel wire staples, width 4ft , second class hard filletes not exc. 3 sq cm , 2 inch isi, ms hinges heavy weight, butt hinges, heavy weight, cold rolled mild steel, and fixed , 3 inch i. s. i, ms hinges heavy weight butt hinges heavy weight, cold rolled mild steel, and fixed , 4 inch i. s. i, ms hinges heavy weight butt hinges, heavy weight, cold rolled mild steel, and fixed , 5 inch i. s. i, ms hinges heavy weight butt hinges, heavy weight, cold rolled mild steel, and fixed , aluminium handles 4 inch aluminium handles, cast type, anodised , aluminium handles 5 inch , aluminium handles 6 inch , aluminium tower bolt 4 inch, aluminium anodised, barrel tower bolts of extruded section and fixed , aluminium tower bolt 6 inch , aluminium tower bolt 8 inch , aluminium tower bolt 10 inch , aluminium tower bolt 12 inch , aluminium sliding bolt 8 inch, aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, or cast aluminium alloy and fixed , aluminium sliding bolt 10 inch , aluminium sliding bolt 12 inch , stainless steel sink with draining board, made out of 1. 00mm thick sheet for kitchen with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 600mmx450mmx60mm , looking mirror fancy type frameless 18x24 inch , hdpe water tank covers , waste pipe 32mm dia low density wiring presure rafing 4 kg sqm with polythene union and check netts 75cm long , lp stop cock, conceal fancy type , curtain rod fancy, decorative type with brackets and knobs 2 nos , flush sistern ball cock , flush tank liver, flush handle , siphon washer , comod bend pipe washer , 1. 25 inch wash basin waste pipe pvc , 1. 25 inch sink waste pipe pvc , urinal waste pipe , spendal for tap, no of spendal 1, 2, 2, 4 , spendal washer for tap , 1 inch upvc tank niple , 1 inch upvc plug 15 mm , upvc solvent , m seal , teplon tape , white cement , mirror screw and plug , connection pipe washer , buttom washer , ewc sheet cover clamp , 0. 50 inch x 0. 50 inch upvc brass elbow , gi nipple half inch length 50mm isi marked , plumbing tape, teflon tape, half inch , plumbing tape teflon tape 0. 75 inch , gi nipple hlaf inch length 75mm isi marked , gi nipple half inch length 100mm isi marked , gi nipple 1 inch length 50 mm isi marked , gi nipple 1 inch length 75 mm isi marked , gi nipple 1 inch length 100 mm isi marked , gi nipple 0. 75 inch length 50mm isi marked , gi nipple 0. 75 inch length 75mm isi marked , gi nipple 0. 75 inch length 100mm isi marked , gi elbow hlaf inch i. s. i mark with heavy grade , gi elbow 0. 75 inch i. s. i mark with heavy grade , gi elbow 1 inch i. s. i //bid details2 / 72mark with heavy grade , 0. 50 inch gi socket isi marked , 0. 75 inch gi socket isi marked , 1 inch gi socket isi marked , 0. 50 inch gi tee isi marked , 0. 75 inch gi tee isi marked , 1 inch gi tee isi marked , 0. 75 inch by 0. 50 inch elbow gi reducer , 1 inch by 0. 75 elbow gi reducer isi marked , half inch gi tube medium grade tata, jindal , 0. 75 inch gi tube medium grade tata, jindal , 1 inch gi tube medium grade tata, jindal , half inch gi union isi marked , 0. 75 inch gi union isi marked , 1 inch gi union isi marked , gi hooks for fixing of gi tube , nails 1 inch , nails 1. 50 inch , nails 2 inch , nails 2. 50 inch , nails 3 inch , mild steel wire annealed not less

Central Government / Public Sector

CTN :44509185

25 Mar, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of rectangular 11000v(11kv) danger signage board of sizes 250x200 mm (length& breadth) of thickness 1.5 mm of material crca mild steel sheet,printed on isi mark plate in three languages i.e.telugu,hindi,english as per gem product id.5116877-94189435580

CTN :44464170

04 Apr, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of mild steel sheet 2400 x 1200 x 2 mm thick cold rolled to specn. is-513-2008 (5th rev. ) (reaffirmed-2

Central Government And Public Sector

CTN :44222624

20 Mar, 2026 NA

Katipala - Karnataka

Tender For corrigendum : tender for supply of tt hart , as per data sheet mrpl or inst or tt or 001 , hart pressure transmitter , range 0-140kg or cm2 , as per specification sheet mrpl or pt or 003 , dpt , remote seal , hart , range 0-8 kg or cm2 , diaphragm ss316l , flange rating 1.5inch300 on lp side , 1 or 2 npt f on hp side , as per data sheet mrpl or inst or rsdp or 012 , dpt , remote seal , hart , range 0-10000 mmwc , diaphragm ss316l , flange rating 1.5inch300 , as per data sheet mrpl or inst or rsdp or 010 , dpt , standard , hart , range -1000 mmwc to+1000 mmwc , diaphragm hastelloy c-276 , as per data sheet mrpl or inst or dpt or 011 , dpt , standard , hart , range -1000 mmwc to+1000 mmwc , diaphragm gold plated on ss316l , as per data sheet mrpl or inst or dpt or 004 , dpt , high static pressure , hart , range -10000 mmwc to+10000 mmwc , diaphragm ss316l , as per data sheet mrpl or inst or dpt or 007 , pt remote seal flange rating 1.5 inch 300 , hart range 0-35 kg or cm2 as per datasheet mrplinst or rspt or 005 or cdu

State Government

CTN :43968624

27 Mar, 2026 NA

Multi City - Punjab

Tender For corrigendum : procurement of lead sheet diaphragms for lp turbines of 2x210 mw and 2x250 mw units for ghtp, lehra mohabbat. tender document annexure-a annexure-b

Central Government/Public Sector

CTN :44432739

13 Mar, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of others - scrap general berths and seat, back rest released from coaches of sort and sizes with or without ferrous frame , coir / foam /lp sheet / plywood / slate with or without rexine including ferrous / non ferrous attachment like screw, nuts, bolts, strips, rivets, springs, hinges etc. sb lot no - bpl / crws / 25-26 / gen. berth /43/0300 note: delivery will be made on actual weighment basis.

CTN :44412215

21 Mar, 2026 NA

Jalandhar - Punjab

Tender For supply of mild steel sheet , iron rod

corporations/Associations/Others

CTN :44387909

24 Mar, 2026 22.83 Lacs

Anpara - Uttar Pradesh

Tender For supply of hp lp valve sealing ring jointing sheet for bmd-i, tmd btps for overhauling of unit#4 btps anpara

CTN :44397547

18 Mar, 2026 NA

Kanchrapara - West Bengal

Tender For auction sale of rolling stock - allocation no.21213304.on as is where is basis. iron and steel cut-up parts of condemned conventional coach body, bearing no. er/032619, type-wgscz, make-icf. qty.-01no. location-c and w extension yard/kpa. to be sold with all available fittings but without excluded fittings. excluded fittings /items are 02 nos. of cond. bogies with its all fittings & 04nos of wheel sets with its fittings & nonferrous attachment if any are excluded from sale and will be returned to the custodian as per extent procedure. approx. saleable weights of condemned conventional coach are included with the un-serviceable items; ferrous-iron, n- ferrous/ others items i.e. un-serviceable aluminium window guide frame-(nil), aluminium checker plate-(nil), aluminium cable-(approx 35.22kg.), s/s wash basin-(06 nos in 12kg.), s/s floor-(approx 768kg), s/s inlay-(approx 80kg.), ss bio tank-(nil). lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood etc. approx. weight of lp, pvc, compreg sheet, coir, rexin, frp moulding, glass, wood are 1.958mt. nb: 03 nos. step hanger i.e. approx. 60 kg. are deficient. condition- [1] after sale, coach will be handed over to the purchaser for dismantling and cutting at c and w extension yard/kpa [2] cutting and dismantling of the above coach are to be made at c and w extension yard/kpa by purchasers own arrangement after ensuring sufficient safety measures against fire hazards. [3] the returnable items of above coach will be returned to the respective shops of kanchrapara workshop at the purchasers own arrangement before completion of delivery.

State Government

CTN :44382511

31 Dec, 2026 NA

Begusarai - Bihar

Tender For drda manrega - tender invitation for procurement of manrega material. - brick aggregate (single size):40 mm nominal size , stone aggregate (single size): 40 mm nominal size , stone aggregate (single size): 20 mm nominal size , stone aggregate (single size): 10 mm nominal size , bamboo 25 mm dia 2.5 meter long , brick bats , portland cement , white cement , block board construction flush door with commercial ply on both faces , unslaked lime , satna lime , dry distemper , oil bound washable distemper/acrylic distemper , cement primer , distemper primer , pink primer (for wood) , black japan , enamel paint , roofing paint for iron sheets in red colour , water proofing cement paint , coarse sand (zone iii) , fine sand (zone iv) , twisted steel/deformed bars , structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness , steel glazed door, window/ventilator, all members viz, f7d, f4b, k11 and k12b etc. , mild steel sheets for tanks , mild steel hooks , mild steel rivets , hard drawn steel wire fabric , galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots , galvanised steel j or l hooks 8 mm dia , galvanished steel bolts & nuts 10 mm dia and 125 mm long round head with slots , galvanished steel barbed wire , iron pintels including weldded pin , sal wood in scantling , g.i limpet washer , bitumen washer , mild steel sheets with bolts and nuts to rest on pintels , 18 mm thick flamed finish granite stone slab , g.i. pipes 40 mm dia , s.c.i hand pump , r.c.c. pipes np2 class 300 mm dia , r.c.c. pipes np2 class 600 mm dia , vitreous china flat back wash basin 630x450 mm , vitreous china india type w.c. pan size 580 mm , common burnt clay f.p.s. (non modular) bricks class designation 7.5 , common burnt clay f.p.s. (non modular) bricks class designation 5.00 , over burnt (jhama) brick aggregate: 120 mm to 40 mm size , over burnt (jhama) brick aggregate: 90 mm to 40 mm siize , galvanised steel corrugated sheets , red oxide zinc chromate primer , coloured inter locking c.c. paver block , sand zone v (jarnuna) , f.p.s. (non modular) clay fly ash bricks class designation 7.5 , 400 g polythene sheet , white marble raj nagar plain 18 mm thick upto 0.50 sqm area , upvc pipes (working pressure 4 kg/cm2) single socketed pipe 110 mm dia , upvcbend 87.50, 110 mm bend , plain ceiling tiles (bwp type phenol formaldehyde synthetic resin bonded) 600x600x12 mm) , semi perforated ceiling tiles (600x600x12 mm) , binding wire , boulder 50 mm to 200 mm , coloured inter locking c.c. paver block , acrylic exterior paint , metal primer (u.g.) , vitrified floor tile 50x50 cm , vitrified floor tile 60x60 cm , vitrifies floor tile 80x80 cm , vitrified floor tile 100x100 cm , border tiles 200x75 mm size , interlocking c.c. paver block (80 mm thick, m-30) , barbed wire , 80 mm thick m 40 cc paver block (yellow color) , 80 mm thick m 40 cc paver block (white color) , ready mix paint for steel work , ready mixpaint for wood work , tmtc 500 8 mm , tmtc 500 10 mm , tmtc 500 12 mim , tmt fe 500 16 mm , tmt fe 500 20 mm , mild steel wire road 6 mm , plain ended valeey gutter sheets , 1 poat , steel channel , steel angles , fruit plant min 3 feet , timber plant min 3 feet , bamboo gabion 2 x 2 x 4 feet , hand pump , fertilizer and pesticide first year 15 days interval , fertilizer and pesticide 2nd year 30 days interval , fertilizer and pesticide 3rd year 30 days interval , fertilizer and pesticide 3rd year 30 days interval , fertilizer and pesticide 3rd year 30 days interval

Mild Steel Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government