Latest module mounting structure Tenders | Government module mounting structure Tenders

Central Government/Public Sector

CTN :43608400

06 Feb, 2026 9.00 Lacs

Delhi - Delhi

Tender For supply of ultra-stable ultra-accurate and extremely low temperature drift current transducer for current range -200a to 200a as per the technical specifications mentioned in annexure-b.

CTN :43606427

27 Jan, 2026 50.84 Lacs

Kupwara - Jammu And Kashmir

Tender For supply of m sand confirming to is 383-2016 specification for coarse and fine aggregates free fromadherent as per tech att , aggregate 20mm stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is and as per tech spec , aggregate 40mm stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is and as per tech spec , ms binding wire 0. 9mm as per tech spec , rapidite quick setting liquid as per tech spec , rapidite quick setting compound of 1 ltr per bag , natural or m sand conforming to is 383-1970 and as per tech spec att , stone aggregate to be crushed rock or gravel 40mm graded as per tech spec att , load bearing concrete pcc soild blocks of size 400mm x 200 mm x 200 mm as per tech spec att , pre prefabricated steel door confirming to is 1038-1938 of size 900mm x1800mm as per tech spec att , synthetic enamel paint red oxide. , synthetic enamel paint colour black , paint brush 4 inch , high intensity prismatic hip retro-reflective or photo luminescent grade as specified minimum 0. 3 0. 5 mm thick uv-stable, make 3m , ismb size 150 x 75mm wt 15. 00 kgs per rm of 1. 5m long as per tech spec , steel roofing trough of size 1700 x 613 x 180mm as per tech spec att , hdpe sand bag of size 75x40 cm, sand colour and each bag having weight not less than 60 gms. , pbs roll self finished tarfelt hessian base for water proofing grade-1 as per tech spec att , cement base paint of make duracem, snowcem and british xtracem , nut bolt of size 10mm x 110mm , silicone gel sealant of 01 pack of 400 gms including applicator gun . , hdpe sheet 400 micron isi marked , aluminum straight edge 50mm square 2mm thick 1800mm long , wooden flat gurmala , tasla iron 18 inch , hand gloves insulated with 2 rubber , drill bit 6mm dia heavy duty 10 nos in each pkt , mason trowel karchi , axepicks with wooden handle , fawda with wooden handle , aluminum spirit level 6 inch , brick line best quality , plumbob 250gms , tape measuring metallic 5m

CTN :43582858

24 Jan, 2026 NA

Nashik - Maharashtra

Tender For tender for supply of nomenclature, power driver box, make & model, frequency response (±3 db) 40 hz-250 hz, sensitivity (1w/1m) 90db spl, long-term spl11968, maximum spl 125 db, nominal impedance bohms, power ratedirms) 600 watts, peak power handling 1200 watts, nominal dispersion n/a, powered version customized powered module, enclosure material 18mm plywood, surface finished black catalyzed polyurethane paint, 1.5mm black perforated steel framed, low frequency driver 18 inch, top driver box, make & model, frequency response (±3 db) 53 hz-20 khz., sensitivity (1w/1m) 94 db spl, long-term spl 125db, maximum spl 131 db, nominal impedance 8 ohms, power rated 600 watts, peak power handling 1200 watts, nominal dispersion 75"h x 50°v, powered version customized powered module, enclosure material 15mm birch plywood, surface finished black catalyzed polyurethane paint, grille 1.5mm black perforated steel framed mounted, black acoustic foam, moang consoles, make & model, number of inputs, 6, gain mic/line, 60db/400b, input levels sensitivity, mic (gain min/gain max), -5dbu/-60dbu, line (gain min/gain max), +6dbu/-40dbu, main output level (nominal/max), +0dbu (0.775v rms)/+20dbu (7.75v rms), frequency response, 20hz to 20khz (+0-3 db), total harmonic distortion, <0.03%, signal to noise ratio, -850b, clip indication, 4 db prior to true clip , , equalisation (treble/mid/bass), 15db 12khz2.5khz/80hz, efx, delay with repeat, power supply, sub amp, make & model, hi-pass, low-pass & bypass crossover, sleek and elegant appearance, limiter & ground switch, specialized system protection circuit with super short circuit overload, dc, soft start, thermal protection, peak, level & signal indicators, 4 individual cooling fans, input sensitivity selector & limiter, class ab circuit & zero noise, bridge, stereo & parallel connections, high damping factor over 400, excellent reliability & stable performance, very attractively priced., built in crossover, crossover, connectors: 1/4" trs (2345)/female xlr (pin 2 hot, make & model, type: electronically balanced/unbalanced, rf filtered, impedance: >50%) balanced, 25k unbalanced, mak input level: +22dbu balanced or unbalanced, connectors: 1/4" trs, type: impedance-balanced/unbalanced, rf filtered, impedance: balanced 2002, unbalanced 1000, max output level: +21dbu balanced/unbalanced into 2k0 or greater, connectors: xlr, type: electronically-balanced/unbalanced, rf filtered, impedance: balanced 600, unbalanced 300, max output level: +20dbu balanced/unbalanced into 6000 or greater, stereo mode:, low high: 45hz to 960hz or 450hz to 9.6khz (x10 setting), low/mid: 45hz to 960hz or 450hz to 9.6khz (x10 setting), mid/high: 450hz to 9.6khz (x10 setting), mono mode:, low low-mid: 45hz to 960hz or 450hz to 9.6khz (x10 setting), low-mid/high-mid: 450 hz to 9.6 khz, high-mid high: 450hz to 9.6khz, filter type: linkwitz-riley, 24 db/octave, state-variable, 40 hz high pass (low cut) fitter both, channels, phase reverse switch on all outputs, individual level controls on all outputs, 24del per octave linkwitz-riley filters, tional tems & conditione

CTN :43600274

31 Jan, 2026 2.00 Lacs

Betul - Madhya Pradesh

Tender For supply of isi mark stable bleaching powder grade 1 is-1065/2019 33-34 percent in hdpe bags

CTN :43590641

28 Jan, 2026 NA

Chhindwara - Madhya Pradesh

Tender For supply of stable bleaching powder (v2) for treatment of water intended for drinking conforming to is 1065 (part 2) (q3) , alumino - ferric (v2) conforming to is 299 (q3)

CTN :43600208

23 Feb, 2026 20.00 Lacs

Indore - Madhya Pradesh

Tender For supply of stable bleaching powder grade 1

CTN :43589195

26 Jan, 2026 NA

Kaij - Maharashtra

Tender For supply of stable bleaching powder for household and industrial use (v3) conforming to is 1065 (part 1) (q3)

State Government

CTN :43601998

06 Feb, 2026 10.77 Lacs

Kolkata - West Bengal

Tender For annual group maintenance work s and p at 78 quarter 96 quarter ips quarter ms building old and new administrative building pwd civil and electrical office post office horse stable wireless rapid section building sweeper barrack within the compound at

corporations/Associations/Others

CTN :43344944

20 Jan, 2026 2.29 Lacs

Hyderabad-T - Telangana

Tender For corrigendum : supply of quality control reagents d d - immuno assay control trilevel assayed lypholisedorliquistable , clinical chemistry control level2 assayed lypholisedor liquistable , clinical chemistry control level 3assayedlypholised or liquistable , urine control liquid stable level 1 , urine control liquid stable level 2 , cardiac markers plus tri level liquistable

State Government

CTN :43337357

20 Jan, 2026 NA

Kamrup - Assam

Tender For corrigendum : supply of various tools and equipment for the dept. of instrumentation and usic gauhati university - technical specifications, variable speed random orbital sander power: 300w or more orbits(no load) 0-13000 rpm pad diameter: 125 mm / 5 inch voltage: 220v-240v weight: 1.5kg or less for easy handling warranty: 2 yrs or more included accessories:- dust bag model: stanley ss30 or equivalent, corded electric hand planer power: 750 w or more planing width: 82 mm maximum depth of cut: at least 2.0 mm per pass no-load speed: at least 16,000 rpm blades: reversible tungsten carbide / tct blades blade change system: simple, tool-assisted blade replacement with proper blade locking sole plate (base): precision machined aluminium / die-cast metal chip ejection: selectable left or right chip ejection dust extraction: provision for dust bag and/or vacuum extraction rebating capability: suitable for rebating / edge planing with guide ergonomic handle with non-slip grip safety:- double insulated or earthed design- thermal overload protection- fully guarded cutter head voltage: 220v 240v, 50 hz weight: not more than 3.2 kg included accessories (minimum):- reversible tct blade set (installed)- one additional spare set of tct blades- dust bag / dust extraction adapter- parallel / rebating guide- blade changing tool- instruction and safety manual warranty: minimum 1-year manufacturer warranty spare parts availability for at least 5 years model: stanley stpp7502 or equivalent, corded heavy duty chop / cut-off saw power: minimum 2,200 w blade / wheel diameter: 355 mm /14 in no-load speed: at least 3,800 rpm cutting capacity at 90 :- circular profile: 120 mm- square profile: 120 120 mm- rectangular profile: 110 160 mm- angular profile: 140 160 mm start system: soft start / reduced start-up current control base / bed: solid steel or machined aluminium base suitable for welding jigs & stops (no thin stamped base) clamping: quick-release work clamp for secure, repeatable cuts wheel change: spindle lock and wrench included for safe wheel replacement dust / spark management: heavy-duty guard with spark deflector and optional provision for connection to extraction or shop vacuum safety: conforms to iec/en/is safety standards for cut-off/chop saws thermal overload protection / motor protection ergonomics: c-handle or d-handle with positive trigger control balanced design for stable cutting voltage: 220 v 240 v, 50 hz included accessories (minimum): one metal cutting wheel (suitable specification) flanges, nuts & wheel change tools instruction manual and safety guide warranty: minimum 2-years manufacturer warranty model: dewalt dw871 or equivalent, professional thickness planer power input: minimum 1,800 w (corded electric) no-load speed: 10,000 rpm planing / width capacity: 310 mm or more maximum planing depth: minimum 2 mm per pass workpiece thickness capacity: 152 mm feed rate: 8 m/min cutter head: two-knife or multi-knife head with quick, safe blade change system infeed / outfeed tables: rigid, level metal tables to support workpiece stability depth adjustment / scale: clear graduated depth control for accurate thicknessing dust extraction: dedicated dust port / adapter for workshop extraction construction: heavy-duty cast metal / machined steel construction, suitable for workshop use safety: complies with relevant iec/en/is safety standards; includes cutter guards and emergency stop voltage: 220 v 240 v, 50 hz included accessories (minimum):- dust extraction adapter- blade spanner and hex keys- blade changing guides- instruction & safety manual warranty: minimum 2-years manufacturer warranty model: dewalt dw733 or equivalent professional thickness planer, brushless impact driver kit power source: cordless, battery-powered (18 v lithium-ion xr system). motor type: brushless dc motor for improved efficiency and longer tool life. battery: two (2) 3.0 ah li-ion batteries included with kit. maximum torque: 190 nm (newton metre) tor

Module Mounting Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

State Government