Latest module mounting structure Tenders | Government module mounting structure Tenders

CTN :40973856

12 Jul, 2025 NA

Kamrup - Assam

Tender For supply of bracket 40mm dia gi tubing medium grade 1.5 mtr long , service cable pvc insulated aluminium conductor 1100 volt , ceiling rose three terminal snow white , led bulk head fitting high pressure die cast aluminum front cover , pvc flexible wire copper conductor multi stranded 0.0016 by 76 , pvc flexible conduit pipe 15 mm dia , pvc round or squire block make havells or finolex or polycab or natural white or equivalent , fire extinguisher of one kilogram capacity , change over switch 32 amps 4 pole , earthing items earthing plate 600 x 600 x 6 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1.5 m long , gi wire 4 mm diameter for earthing , charcoal , salt normal , lightening conductor air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled with 2 nos holes for 6 mm dia near one side , insulating pvc block 75x75x30 mm , fire alarm system individual standalone plastic body smoke alarm with adequate provision for fixing on wall or ceiling or roof , individual standalone plastic body heat alarm with adequate provision for fixing on wall or ceiling or roof , fire ball extinguisher of 1.3 kg wt with suitable provision for wall mounting and capable of self activating on contact with flames , furniture double sleeping bunk alongwith rexene sleeved matress , steel bed side locker of size 1000mm x 1520mm x 450mm comlete all as specified in tech specification , study chair of size length 56 cm height 82 cm and width 56cm , study table of size 4x2 wooden top on round tube structure with three drawers unit as per photograph of sample attached , looking mirror of selected quality frameless of size 600 x 450 x 5 mm , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating capacity of 5 lts per hou , portable indoor type high quality kero heater metal body ignites , plastic dustbin of capacity 40 ltr make neelkamal or cello or suprele or equivalent

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830502

16 Jul, 2025 6.14 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for staff quarters and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada. (package-2) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., library coffie table- supplying and placing center table in with an overall size 1200mm x 600mm x 450mm (h) that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywood with both side laminate finish. the four side of the table is provided 150 mm wide 18 mm thick play under the main work top plywood. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top frame and base frame and legs shall be supported on ms rectangle pipe frame having cross-section area 25mm x 25mm with 1.2mm thick with powder coated. there shall be ppcp shoe provided at the bottme to avoid scetching on the floor., side unit shall be provided with the bed at both side with an overall size 450mm x 450mm x 550mm. the side unit shall be made of 18mm thick waterproof plywood with both side laminate. it shall be supplied with one sliding drawer and one open drawer., dining table with six chairs, supplying & placing dining table with six chairs an overall size 1800mm x 900mm x 750mm. the top of the table shall be made up of 18mm thick teak wood. the top profile shall be in rectangular wooden shape with the edges shall be in chamfer shape. the under structure shall have teak wood having size 75mm x 75mm round shaped legs with melamine polish.there shall be shoe provided at the bottom to avoid scratches on the floor. dinning chair. the seat shall be made of 12mm thick waterproof plywood and season/teak wood frame upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m with leatherite tapestry 0.8mm thick and 535 gsm and the back shall be made of season/teak wood malemine polish finish frame. the frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish of size 50mm x 50mm. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 41010 mm(d) x 45010 mm(w) and back size shall be 44010 mm(w) x 56010 mm(h) from seat. overall height shall be 100010 mm., providing and supplying corner table with an overall size 600mm x 600mm x 410mm. the top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. the mdf top should have decorative finish with approved veneer and pu polish accordingly. the understructure shall consist of 4 nos. of ms sheet gold leg with 6mm thick., providing and installation of large tv unit, carcass panel shall be made of 18 mm prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. drawer bottom shall be made of 12 mm thick prelaminated waterproof plywood. 4 drawer front shall be made of 18 mm thick prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. all drawers shall be fitted with knobs.top shall

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

Central Government/Public Sector

CTN :40949791

29 Jul, 2025 NA

Pallikaranai - Tamil Nadu

Tender For supply,installation,testing and commissioning of materials for 11kv 2 pole dp structure of yard 1 and yard 2 at niot,chennai - supply, installation, testing and commissioning of 11kv double break ab switch complete set of three phase without post insulator, supply, installation, testing and commissioning of double break o /acsr four end connector hv switched, supply, installation, testing and commissioning of complete set of gi operating down pipe 32 mm dia.(2 lengths of 10 feet long duly fabricated), gi pipe 1 inch (25mm) tandem pipe 10 feet long., supply, installation, testing and commissioning of 11kv d.o. fuse without post insulator, supply, installation, testing and commissioning of 11kv d.o. fuse element up to 60a, supply, installation, testing and commissioning of 11kv post insulator for ab switch and d.o. fuse, supply, installation, testing and commissioning of 11kv disc insulator with metal part, supply, installation, testing and commissioning of 11kv pin insulator with gi pin, supply, installation, testing and commissioning 11kv lightning arrester-9kv, 5ka, supply, installation, testing and commissioning of stay set complete with guy, supply, installation, testing and commissioning of stay wire 8mm dia., supply, installation, testing and commissioning of p.g. clamp, supply, installation, testing and commissioning of a stool for pin insulator, total without gst, gst 18%, total

State Government

CTN :40941208

08 Jul, 2025 NA

Chandrapur - Maharashtra

Tender For material required gp kanpa tah nagbhid dist chandrapur - 80 mm. metal white-(hand broken metal) with royalty, 40 mm metal white- (hand broken metal) with royalty, 20 mm, , , , , 16 mm, 81 mm. metal white-(hand broken metal) with royalty, khila, , paver block, , , , steel hollow door frame, c.r.c sheet work, ms (grill work), vindow, tractar bhada, saddle, , ms (grill work), vindow, tractar bhada, saddle, , steel, , ferud, birla white, , , gi pipe, tank connector, rope waterproof, ms tank structure, gi tank structure, ms angle, j bolt, ms pipe, gi sheet, led light 14 watt, led light 12 watt, led light 80 watt, led light 100 watt, gi barbed wire, rcc modern bench (3 sheet), solar lugs, d c fuss, distic watar, m.s. pipe 1.5x1.5, m.s. plat, solar pannel, rcc pipe 600 mm, rcc pipe 450 mm, rcc pipe 300 mm, pvc pipe 150 mm, mat finish stainless steel (302 grade), inwell bore driling, battery lithium, led light 24 watt, semi integrated solar light, brekar, ro 12 ltr aqua, ro 25 ltr aqua, m.s. pipe 2x2, m.s. pipe 3x3, m.s. pipe 4x4, m.s. pipe 1x1, rcc pipe 900 mm, rcc pipe 800 mm, solar panel connector, dc wire, 75 wp spv module, ms powder coated battery box, ac wire, solar pump controller 1 hp, nipples, hdp pipe, gi l socket, cotter pin, inwell bore pipe, dustbin, profile sheet, g.i. sheet, jsb, jcb, murum/80mm/40mm metal compaction, , needle tyap, 2 nos, profile sheet screw, chain line fencing, putty, oil paint, oil bond destember, water proof cement paint, praymar dimond cut kota stone 2x2, style verified 2x2, ceramic tiles wall mattfinish ceramic tiles 30cmx30cm, chequered tiles 30cmx30cm, cement chechekr styles, sintex, nal toti, 15 mm walve, 25 mm walve, 32 mm walve, cpvc pipe 15mm, cpvc pipe 15mm, cpvc pipe 20mm, cpvc pipe 50mm, cpvc elbow 15mm, cpvc elbow 20mm, pvc pipe 90 mm, pvc pipe 110 mm, batching and mixing plant @75 cum, flush door, sink, kadppa, off grid inverter solar, cpvc t 25 mm, cpvc t 32 mm, cpvc t 40 mm, 32 mm pvc pipe, pvc pipe 63 mm, stone dust, 10-12 mm, 80 mm, 40 mm, cpvc 25 mm, cpvc t 20 mm, 12 mm, 10 mm, 08 mm, solar street light dc 14 w led, green mat, 16 mm nutbolt, ro 50 ltr aqua, gi high mast pole, granute stone, solar pump 1 hp, water tanker 5000 lt, cpvc pipe 25 mm, cpvc pipe 32 mm, cpvc pipe 40 mm, , murga, , , , acrylic polymer modified liquid, , cpvc 15 mm , cpvc 20 mm, cpvc 25 mm, cpvc 32 mm, cpvc 40 mm, cpvc 15 mm t

corporations/Associations/Others

CTN :40848245

14 Jul, 2025 NA

Panvel - Maharashtra

Tender For corrigendum : regarding approving the rates of open gym materials for the year 2025-2026, 2026-2027 and 2027-2028 for 3 years as per requirement of panvel municipal corporation - forearm twirlproduct area : 1.5m x 0.8m (5ft x 2.6ft) safe play area : 2.5m x 1.8m (8.2ft x 5.9ft) ideal for : 13 years & above function: strengthens shoulders & forearms improves wrist agility.technical specification: post dia: 80nb gi main vertical support pipe of shoulder builder is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frameto hold the rest assemblies wheel structure: 25nb galvanized pipe bend to form ring of wheel and spokes are made up of 15nb g.i. pipes that connect to each other to form a wheel of shoulder twirl. nylon knobs are provided on the wheels for gripping purpose. this wheel is fixed to main support with the help of 40nb connector pipe with specially designed bearing housing. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with, abs board product area : 1.6m x 0.8m (5.2ft x 2.6ft) safe play area : 2.6m x 1.8m (5ft x 5.9ft) ideal for : 13 years & abovefunction: strengthens shoulders & forearms improves wrist agility.technical specification: main structure: the abs board shall be having ergonometric design with main support of 50nb pipe. galvanized round pipe having 50nb with pipe rectangular 50 x 25 x 3 mm to be welded to the main support frame. backrest: backrest sheet having 3mm thick to be made from frp materails pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. frp products: it is made up of fiber reinforced plastic(frp) process. it is made up of 3-4 mm thick fiber reinforced plastic. the frp material is tested for abrasion resistance & uts(ultimate tensile test) powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with the help of cross hatch cutter instruments. nut and bolts: galvanized/ s.s./allen bolt/button head allen bolt & nuts / nylon lock nuts are used with pvc bolt caps.all open ends of pipe been closed by gi / pvc caps for user safety against entrapment., aerial stoller product area : 1m x 0.5m (5ft x 2.6ft) safe play area : 2m x 1.5m (6.6ft x 5ft) ideal for : 13 years & abovefunction: strengthens leg muscles. lower body workouttechnical specification: post dia: the aerial stroller having ergonomic design with 80nb gi main vertical support pipe of aerial stroller is fixed over 10mm thick base plate.\ clamping plates are attached to main frame to hold the rest of assemblies. footrest and handles: footrest bend and handle having 40nb and 25nb dia galvanized pipe respectively.the materials used for foorest are aluminum/nylon/lldpe/hdpe specially designed mounting flange assembly having circular flange of 130mm dia with 16mm thickness is provided for footrest assembly. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for

CTN :40944418

10 Jul, 2025 NA

Multi City - Karnataka

Tender For soura beedi deepa nirvahane - ups 5.2kva 4160w 48v inverter with batteries 150ah 4nos with stand, solar water heater 500ltrs, supplying and fixing of solar grid system 3kw / 48v dc solar inverter with 2kw solar modules, modules mounting structure, solar batteries 12v, 150ah, battery stand, with system control unit, cabling, installation, labour and transportation including, solar lanterns, providing and fixing 30w solar street light, 80w solar panel, 20feet pole and 24 aeh lithium battery with installation and service., solar high mast-50 wats led solar flood light, 50 ah lipo4 battery, 100 wats solar panel with 25 ft height solar panel along with 4 panel structure with 5 ft deapth base fitting with net bolt system to the ground level

CTN :40941090

17 Jul, 2025 15.00 Lacs

Thane - Maharashtra

Tender For tender supply of school laboratory material , science material - chemical app. test tube 6"x1" (borosilicate), test tube 5"x5/8" (borosilicate), test tube stand wooden, wire gauge, tripod stand 8 x 4 , beaker 50ml ord, beaker 100ml ord, beaker 250ml ord, conical flask 250ml ord, evaporating dish 3", l tube, glass rod, thermometer 110oc red, measuring cylinder 100ml, blotting paper sheet (filter paper sheet), filter paper pkt, ph paper pkt, litmus red paper pkt, litmus blue paper pkt, pair of tongs, al strips, zn strips, cu strips, fe strips, plastic funnel 3", watch glass 3 , pipette 10ml, burette 25ml with pinch clip, thistle funnel, brush small, test tube holder, deflagrating spoon, physics concave mirror 2 , convex lense 2 , mirror stand wooden, glass slab 3x2, magnetic needle on stand, magnetic compass-3", dry cell box with wire, meter scale 1mt wooden, drawing board, drawing pins pkt, physics candal stand, battery eliminator -2-12v/2a, colour index chart, ohams law app., series app., parallel app., concave lense 2 , geometrical box plastic, weight machine-personal balance (human), lens stand wooden, white screen, dessecting microscope, sound app. reflection sound appartus, overflow vessel metal, restort stand complete set, law of moment app., light travel in stright line, crocodile clip red & black, only clamp for retort stand, 6v bulb, card board plastic sheet, plain mirror angle set (multiple image app.), prism, hope s app., chemical magnecium wire 25 gm., zinc granules 100 gm., ferrous sulphate 500 gm., copper sulphate 500 gm., sodium sulphate 500 gm., barium chloride 500 gm., lead nitrate 500 gm., dil hydrochloric acid 500 ml., dil sodium hydroxide soln 500 ml., acetic acid 500 ml., sodium bicarbonate 500gm., sulphuric acid 500 ml., hydrochloric acid 500 ml., glycerin 500 ml., iron metal powder 500 gm., sulpher powder 500 gm., sodium chloride 500 gm., pottassium permagnet 500 gm., silver nitrate soln 100 ml., iron wire 1 mtr., copper wire 1 mtr. each, ammonium hydroxide 500 ml., chemical iron sulphide sticks 500 gm., starch iodide paper per pkt, chlorine water 500 ml., universal indicator 500 ml.., red litmus soln 500 ml., blue litmus soln 500 ml., alu.dust 500 gm., zinc sulphate 500 gm., iodine soln 100 ml, lime water 500 ml., calcium carbonate 500 gm., phenolphthelein soln 500 ml., calcium hydroxide 500 gm., compound microscope, pottassium chloride 500 ml, potassium bromide 500 ml, potassium iodide solution 100 ml, simple microscope (single nose), ethanol (lab solvent) 500 ml, tincture iodine 100 ml, biology amoeba binnary fission slide, hydra budding slide, straited muscle slide, nerve cell slide, spirogyra slide, earthworm specimen in jar, cockroach - specimen in jar, fish - specimen in jar, plant cell sld, animal cell sld, human ear model, human brain model, human heart (4parts), excretory system model, electrical motor model, electrical generator model, structure of human eye(model in fibre), spirogyra jar - specimen in jar, agaricus jar - specimen in jar, mucor slide, bacteria slide, paramocium slide, food chain chart, food web chart, carbon cycle chart, oxygen cycle chart, nitrogen cycle chart, dna model, dna chart, animal tissue chart, cell division chart, slide of mitosis, slide of meiosis, slide of acetobacter, slide of streptococcus, thermophillis, slide of lactobacillius acidophillis, slide of saccaromyces serevisiae, slide of aspergillus oryza, chart plant issue chart, nervous system chart, std 10th science chart- part 1 marathi medium, std 10th science chart- part 2 marathi medium, std 9th science chart- part 1 marathi medium, std 9th science chart- part 2 marathi medium, electrical motor chart, electrical generator chart, part of flower chart, amoeba binnary fission chart, hydra budding chart, classification of plant chart+hindi & english comb, human reproductive system-female chart, human reproductive system-male chart

State Government

CTN :40861455

03 Jul, 2025 3.28 Crore

Sangli - Maharashtra

Tender For providing and supplying furniture to the various building at krantisinh nana patil government college for food technology, at peth, tal. -walwa, dist. sangli for mpkv rahuri - providing and supplying furnitures to the various buildings at krantisinh nana patil government college for food technology at peth, taluka walwa, dist sangli, for mahatma phule krushi vidyapeeth, rahuri ahilyanagagr, maharashtra, single bed @ 2025lx 1000dx 650h :- providing and fixing single bed of size 2025lx1000dx650 h with matress and pillow. under structure :-the legs are made of square tube of size 25x25 mm made out of ms with a thickness of 1.2mm. the legs should have corner brackets welded to it at two levels. the corner brackets are made of 2mm thick crca having a l shaped structure to join the side panels and head board to the leg . threenos .of horizontal stiffeners are provided at equal intervals. the stiffeners are made of square tube of size25x25mm made out of ms with a thickness of1.2mm. the middle horizontal stiffener has a leg at tached to it to transfer the load to the ground and add to the strength and stability of the complete structure. this legisal so made of square tube of size 25x25mm made out of ms with a thickness of1.2mm. all metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 microns dft. side panel:-the side panel sare made upof 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the over all width of the side panel is 150mm. the side panels have 18mm thick prelam particle board baton running for required lengtht oadd rigidity to the structure headboard: -the head board is made up of 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000x650mm. footboard:-the foot board is made up of 18mm thick prelamparticle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000 x 450mm. bedbase:-the bed base is made up of 12mm thick prelam particle board with both side white laminate., study/ computer table 400d x 1030w x 725h :-providing and supplying computer table as per approved design the table shal be of size 400d x 1030w x 725h including in built key board pull out tray for keeping keyboard of computer the table shall be made from 20mm prelaminated partical board . all edges are covered by 2mm thick pvc edge bands glued by hot melt glue applyed by auto edge bending machine. modesty panal made from 18mm both side prelaminated partical board all edges covered by 0.8mm pvc edge band gluve by hot melt glue applied by auto edge bending machinne, study/visitor chair :-providing and supplying nilkaml/ cello/ supreme make visitor chair of plastic with coushion for seat and back of with 55 cm depth 60cm and hight 80 cm with approximate weigth of 4 kg as per approved design and directed by engineer-incharge, dinning chair:-supplying and instalation of 6 seater dinning table of size : 1800mm w x 1200 mm d x 750 mm h with structural frame to be made in 35mm x 50mm x 1.6mm thick powder coated ms box section welded with ms champ made out at of 3 mm thick ms plate at corners. table top to be made up of 25 mm thick prelaminated mdf board conferming to is 14587:1998 table top to have 2 mm reious at the on all edges table fixed with the frame with required fitting solid wood leg to be made of 90mm x 90mm size with solid oke wood with adujustable metal leaveling screw (m10) at the bottom leg to be fixed to the structural frame with m8 philips head bolt. metal finish: all metal component to be structured matte black colour with powder coating more than 60 micron, all exposed wooden part shall be finish with good polish, wood finish with 2 coats of pu coating all wooden panel are stained to pass 4h test, di

Module Mounting Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

State Government