Latest motor starter panel Tenders | Government motor starter panel Tenders

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

Corporations/Associations/Others

CTN :45532296

03 Jul, 2026 3.55 Lacs

Peerkankaranai - Tamil Nadu

Tender For corrigendum : providing new deep borewell and submersible pump motor, starter panel and sintext tank to tambaram fish market in ward no.49 at zone 4 tcmc

Central Government/Public Sector

CTN :45702760

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand,castiron tems,girder base with concrete adhearings,gearset,grill,vcb panel boxes,gipipes,nuts and bolts,angles,rails,panel boxes,fissureplates,wheels,cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: (1)behind a row bin 3&4, (2)near old e-ii ward annexe

Central Government/Public Sector

CTN :45688766

16 Jul, 2026 10.62 Lacs

Bhavnagar - Gujarat

Tender For supply of sitc of openwell, horizontal type 7.5 hp submersible motor 1200-400 lpm , sitc of openwell, horizontal type 7.5 hp submersible motor 1750-550 lpm , sitc of openwell, horizontal type 10 hp submersible motor 675-500 lpm , sitc of dust and vermin proof outdoor, double door, floor mounted motor starter panel , providing and fixing 50 mm inner dia g.i.pipe, b class , providing and fixing 65 mm inner dia g.i.pipe, b class , providing and fixing 100 mm inner dia g.i.pipe, b class , supply and fixing 50 mm dia wafer type butterfly valve pn-10 rating , supply and fixing 65 mm dia wafer type butterfly valve pn-10 rating , supply and fixing 100 mm dia wafer type butterfly valve pn-10 rating , supply and fixing 50 mm dia cast steel swing check valve class 150 , supply and fixing 65 mm dia cast steel swing check valve class 150 , supply and fixing 100 mm dia cast steel swing check valve class 150

Central Government/Public Sector

CTN :45679507

08 Jul, 2026 NA

Golaghat - Assam

Tender For 160kw thermoplastic polycarbonate motor starter panel , 110kw thermoplastic polycarbonate motor starter panel , 55kw thermoplastic polycarbonate motor starter panel , 630a thermoplastic polycarbonate feeder pillar

CTN :45693782

13 Jul, 2026 73.10 Lacs

Bhiwani - Haryana

Tender For supply ere commi of various electromechanical equipment like 5 no 5 cs vt pump electric motors starter panel and other allied material for flood protection works from the field area of village dang khurd outfall at rd 65000r of nigana feeder - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

CTN :45693784

13 Jul, 2026 45.63 Lacs

Bhiwani - Haryana

Tender For supply erec comm of various electromechanical equipment like 3 no 5 cs vt pump electric motors starter panel and other allied material for flood protection works from the field area of village ghuskani outfall at rd8350 l of nigana feeder - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type, supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

Central Government/Public Sector

CTN :45677979

15 Jul, 2026 28.00 Lacs

Chandigarh - Chandigarh

Tender For repair/replacement of various sizes of unserviceabe pumps sets motors, starter panels, motor protection device and replacement of unserviceabe column pipe and submersible cable and connected items etc at 3 brd under ge (af) mc chandigarh

corporations/Associations/Others

CTN :45645110

30 Jun, 2026 NA

Kolkata - West Bengal

Tender For repairing, servicing and overhauling of 3 nos. 55 kw dwf motor starter panels with allied electrical works at joka dps under grbu.

CTN :45654244

03 Jul, 2026 14.94 Lacs

Kanchipuram - Tamil Nadu

Tender For providing new borewell, pumpset with all allied materials and pumping main lines to mettur indra nagar in somangalam panchayat, kundrathur panchayat union, kancheepuram district under panchayat union general scheme funds of the year 2026-27 - charges for conducting geo physical survey, drilling of borewells anywhere in tamilnadu including transportation from one place to another with in tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( site will be shown by the twad board officers) including construction of mud pit. - 0m to 60m depth, 60m to 90m depth, 90m to 120m depth, reaming of 150mm dia borewell to 300mm dia borewell as directed at site - 0m to 60m depth, 60m to 90m depth, 90m to 120m depth, labour charges for inserting casing pipe supply & packing of pebbles, supply & delivery of 150mm dia pvc plain casing pipe as per is 12818 / 2010, supply & delivery of 150mm dia pvc slotted casing pipe as per is 12818 / 2010, supply & delivery of 160mm dia pvc end cap, charges for developing the borewell using air compressor in hours of 300 cfm capacity, construction of bore pit including all labour charges, supply & delivery of vertical type submersible pump set discharges : 200m & 50 lpm for 150mm dia borewell as per is 8034, supply & delivery of control panel board suitable for three phase submersible motor with two level guard & auto start, supply & fixing of 50mm gi pipes, supply & fixing of 50mm gi coupling, supply & fixing of 50mm gi elbow, supply & fixing of 50mm gm gate valve, supply & fixing of 50mm gm nr valve, supply & fixing of 50mm gi flange set, supply & fixing of 50mm ms clamp set, supply & fixing of 50mm gi union, supply & fixing of gi reducer heavy -65mm x 50mm, supply & fixing of gi reducer heavy -80mm x 65mm, supply & fixing of pvc threaded coupler -90mm x 80mm, supply & fixing of 4.00 sqmm 3 core flat type copper cable as per is 694/1990, erection chagres to new submersible pump set & fixing of new control panel board, supply, delivery, laying and jointing of 90mm dia pvc 4ksc pipes including earthwork excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by twad board officers, supply & fixing of pvc specials as per bis 10124 / 1988 part 1 to 13 & bis 7834 / 1975 with isi marks to site of works - 90mm pvc bend, supply & fixing of pvc specials as per bis 10124 / 1988 part 1 to 13 & bis 7834 / 1975 with isi marks to site of works - pvc threaded coupler -90mm x 80mm, supply & delivery of gi pipes medium class as per is 1239 / part 1 / 1990 with isi marks to site of works - 80mm dia gi pipes, supply & fixing of gi specials with isi marks to site of works - 80mm dia gi elbow, supply & fixing of gi specials with isi marks to site of works - 80mm dia gi coupling, laying and jointing of gi pipes with gi specials and pvc specials etc

Motor Starter Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others