Latest ms conduit Tenders | Government ms conduit Tenders

CTN :45717002

13 Jul, 2026 1.92 Lacs

Bulandshahr - Uttar Pradesh

Tender For tender for supply of pipe and pipe fittings - m s flange 8 inch as per table d 12mm thickness , m s flange 4 inch as per table d thickness 10mm , m s flange 6 inch as per table d 10mm thickness , m s short bend 6 inch , m s short bend 8 inch , g i socket 1 inch , g i socket 1 1/2 inch , g i socket 1/2 inch , g i socket 3/4 inch , m s socket 1 inch , m s socket 1/2 inch , m s socket 3/4 inch , m s uninon socket 3/4 inch , wire rope clamp 3/4 inch , m s long bend 1 inch , m s long bend 1 1/2 inch , m s long bend 3 inch , m s long bend 4 inch , m s long bend 6 inch , m s long bend 8 inch , g i clamp for hose pipe 1 inch , g i clamp 1 1/4 inch , m s long bend seamless sedule 40 size 1 1/2 inch , carbon steel seamless steam pipe as per astm a 106 grade b in schedule 80 size 114.3 mm od 4 inch nb ibr approved with mtc , carbon steel seamless schedule 40 pipe line size 6 inch x 7 11 mm thick

CTN :45741187

21 Jul, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For empanelment of principal manufactures/ authorised dealers for fixing of annual rate contract for supply of gi pipe, ms conduit pipes etc for fabrication of tubular structure

corporations/Associations/Others

CTN :45608480

24 Jun, 2026 5.00 Lacs

Coimbatore - Tamil Nadu

Tender For providing street lights and play materials to bharathi nagar and rajan nagar footpath area in ward no 37of west zone. - supply and fixing of slider including cost of conveyance of all materials to work site etc., complete, supply and fixing of merry-go-round including cost of conveyance of all materials to work site etc., complete, supply and fixing of jungle jum including cost of conveyance of all materials to work site etc., complete, supply and fixing of twin seasaw including cost of conveyance of all materials to work site etc., complete, supply and fixing of swing seasaw including cost of conveyance of all materials to work site etc., complete, pedastal for street light pols :- earth exacavation of size:- 0.30m x 0.30m x0.75m and plain cement concrete 1:4:8 mix of size:-0.30m x 0.30m x 0.10m and plain cement concrete of size:-0.30m x 0.30m x 0.65m and mild steel hollow pipe, square rod, plate, nuts and bolt including cost all material and labour chagres and conveyaing all material to work site etc., complete, supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. pvc armoured ltug cable with earth connection, supply, of 7 meter length single bracket pole with base plater (250 x250x6 mm )114.3 od x5.40 mm thick x 400 mm length ,88.90 mmx4.85 mmtk x 1500 mm length ,76.10 mm od x 3.25 mm thick x 1500 mm length including fixing in position as per standards and standards of the departmental officers etc complete, supply and run of 2 of 4 sq.mm. pvc insulated sc unsheathed frls copper conductor of 1100v grade insuitable heavy gauge ms conduit pipe concealed with continuous earth wire connection by 4sq.mm copper wire and making good of the concealed portion wiith suitable colour, supplying and erecting led street light fitting 48w led street light fitting with led, supplying and erecting 63 a mcb suitable to fix in 1 each module of modular switch in provided box complete & duly concealed with necessary material and connected.for four pole 63 a ,10 k

CTN :45252384

20 Jun, 2026 36.91 Lacs

Baramulla - Jammu And Kashmir

Tender For bid to ras supply of constr of amn pd of size 2.4m x 2.4m , soak pit of size 1.0m x 1.0m , quick setting compound , hydrophobic poreblocking ingredients , manufactured sand , aggregate 20mm. , aggregate 40mm. , aggregate 63mm. , pcc soild blocks size 400mm x 200 mm x 200 mm , integral water proofing compound , mild steel tmt bars 08 mm di , ms binding wire , ply wood 2.00m x 0.30m and 12mm thick , ply wood 10 mm , ismb conforming size 150 x 75mm , ismc size 75 x 40mm , 5mm thick ms plate , 4 nos x 16mm dia 100mm long foundation bolt , steel roofing trough 2000x613x180mm , hdpe sand bag of size 75x40 cm , pbs roll , ppgi sheets 3270 x 1000 x 0.60mm thick , 3.00 m long rectangular hollow section of size 66x33x2.90 , 2.30m long rectangular hollow section size 66 x 33 x 2.90mm , 150mm long ms angle of size 50x50x6mm , self taping screw 80mm , silicone gel sealan , bitumen for filling of expansion joint , hdpe sheet , prefabricated steel loop hole size 600mm x450mm , prefabricated steel door size 900mm x1800mm , ms rack of size 1.22m x 0.61m x 1.65m , pre fab welded door ismc 200 x 75mm , pre fab welded window loop hole , common burnt clay building bricks , synthetic enamel pain , red oxide primer , oil bound distemper , polyurethane thinner , chalk white , cement base paint , bricktrowel , drop forged high grade , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , single piece hot-forged carbon steel powrah , high quality heavy duty flat painting brush , non slip heavy duty industrial rubber gloves , aluminium spirit levels 12 inch , transparent flexible pvc water leveling tubes , heavy duty combination cutting pliers , non metallic fiberglass measuring tape 15 mtr , heavy duty crow bar 5 feet , wooden flat , prefabricated gel earthing electrode of pipe , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip size 25mm x 3mm 9.00m long , iron spikes 16 inch long , gi strip of size 32 x 6mm, 3.00m long , gi nipple 20mm dia and 10cm long , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium grade 40mm dia, 6 mtr long , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , fire extinguisher 2 kgs capacity

CTN :45307467

20 Jun, 2026 45.05 Lacs

Baramulla - Jammu And Kashmir

Tender For bid to ras supply of constr of fighting pd of size 2.4m x 2.4m , soakl pit size 1.0m x 1.0m , steel loop hole size 610 mm x 330 mm , prefabricated steel door size 900mm x1800mm , door window loop hole 50 x 50 x 6mm 1200mm length , mild steel angle 35x35x5mm with , steel roofing trough size 2000x613x180mm , steel roofing trough size 1630x613x180mm , ply wood 10 mm thick , steel beam ismb 150 rsj 150 x 75mm 4.6mtr long , bitumen for filling of expansion joint of pcc , quick setting compound , integral water proofing compound , pcc soild block size 400mm x 200 mm x 200 , pbs roll size 20m x 0.90m , hdpe sand bag of size 75x40 cm , oil bound distemper , synthetic enamel pain og , hdpe sheet 150 micron thick , interlocking tiles. 60mm thick pcc , aggregate 20mm , aggregate 40mm , aggregate 63mm , manufactured sand , common burnt clay building bricks 230x115x75mm , polyurethane thinner , cement base paint , hydrophobic poreblocking ingredients , 18w led tube and fitting 4ft , 09 w led bulb , 9 w interter bulb , pvc ceiling rose 2 3 terminal , pvc casing capping square box 4 inch x 4 inch , 6a one way single module flush type modular switch , 1 module concealed metal flush box , white cover plate with frame 1 module , 2 module concealed metal flush box , white cover plate with frame 2 module , cable pvc insulated unsheathed single core 1.5 sqm , flexible wire pvc insulated twin core twisted , 25mm x 16mm pvc casing capping profile , 25mm pvc casing capping l bend elbow , pvc casing capping t 25mm , pvc casing capping elbow 25mm , 20 mm ms drywall cross recessed screws , mcb double pole 230v ac 50 hz 6 amps 10 ka , self adhesive plasticized pvc insulation tape , 16a spn or dp main switches , mcb distribution boards in sheet metal , bricktrowe , drop forged high-grade carbon steel brick hamme , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , single piece hot forged carbon steel powrah , high quality heavy duty flat painting brush , industrial rubber gloves , aluminium spirit levels 12inch , transparent flexible pvc water leveling tubes , cutting pliers , measuring tape 15 mtr , earthing electrode , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip , iron spikes 16 inch long , gi strip of size 32 x 6mm, 3.00m long , gi nipple 20mm , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium 40mm dia 6 mtr long , natural sand , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , fire extinguisher 2 kgs capacity

CTN :45346288

25 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of carbon steel straight pipe for pf lines and seal air fan discharge line

Central Government And Public Sector

CTN :45525671

13 Jul, 2026 38.80 Lacs

Mumbai - Maharashtra

Tender For renovation of supply air-conditioning system of k-4 and k5 with other accessories for rlg, barc, mumbai - design, fabrication, supply, installation, testing and commissioning of chilled water base double skin 10000 cfm ahu (without blower) as per clause no. 01 of technical specification., supply, fabrication and installation of ms supporting structures as per clause no. 02 of technical specification., design, supply, fabrication and installation of galvanized steel sheet for discharge air ducts as per clause no. 03 of technical specification., supply and installation of magnehelic gauge pressure range 0 to 25 mm wc including fittings as per clause no. 04 of technical specification., supply and installation of pressure gauges (0 to 7 kg/cm2 range) including fittings and ss ball valve as per clause no. 05 of technical specification., supply and installation of bar stock type ss thermowell with temperature guage as per clause no. 06 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 80 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 100 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 125 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, installation, testing & commissioning of 50 mm size cpvc pipe with fittings as per clause no. 08 of technical specification., supply, installation, testing and commissioning of 100 nb mm dia flange ended gate valve ( ci body and gun metal internal)with suitable fittings and counter flanges for pipelines as per clause no. 09 of technical specification., supply, installation, testing and commissioning of 80 nb mm dia flange ended gun metal gate valve with suitable fittings and counter flanges for pipelines as per clause no. 9 of technical specification., supply, installation, testing and commissioning of 80 nb mm dia globe valve with suitable fittings and counter flanges for pipelines as per clause no. 10 of technical specification., supply and installation of all-around cold insulation saddles for chilled water pipeline along with fixing fittings as per clause no. 11 of technical specification., supply and installation of aluminium construction powder coated air diffuser along with volume control damper as per the clause no. 12 of the technical specification., supply and installation of 38 mm thickness close rubber cell cold insulation of classo fire rating followed by aluminium clading as per clause no. 13 of technical specification., supply, fabrication, installation and commissioning of the ss structural material including ss hardware. as per clause no 14 of technical specification., fabrication, supply and installation of ss construction multilouvered volume control dampers (vcd) along with electricaly operated modulating type actuator as per clause no. 15 of the technical specification., supply, fabrication and installation of plenum connection to existing blower as per clause no 16 of the technical specification., dismantling, segregation, removing & shifting of various equipment like ahu, insulated pipes along with supports, fittings, valves etc. as per the clause no. 17 of the technical specification.

CTN :45298738

15 Jun, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of cement opc 43 grade , coarse sand river oblique m sand , graded stone aggregate 20mm , graded stone aggregate 40mm , pcc solid block of size 400 x 400 x 200mm 75 kg per cm2 , tmt steel 25mm grade fe 500 , tmt steel 16mm grade fe 500 , tmt steel 12mm grade fe 500 , binding wire 18 gauge , oil bound distemper , primer , water proofing compound in 1 kg packing , blast door 3000 x 2800 as per elevation including all fitting and fixtures , ventilator 600mm dia with mesh , non sparking gritless flooring moc , explosion proof ip66 lighting and fittings , lightning protection system cu strip oblique finial , 16 sqmm 2 core lt ug xlpe cable 200rm and point wiring with 4 nos flame proof lights , transparent pipe 5mm dia bore for water leveling best quality , iron bar 600mmx16mm to bend 12mm and 10mm tmt bar , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line best quality , plumb bob iron best quality , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle min wt 5 kg without handle , picks axes with chiesel and point ends kudali 14 cp nominal wt 3 kg overall length min 595mm with handle , showel square nose 14 gauge tata high carbon steel blade size 310 x 245mm shaft size 710mm fitted with strong steel crutched wooden handles , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft colour green , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work etc colour olive green oblique black , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia outer pipe od 60mm and inner pipe od 48mm of 3mm all as per brief technical specification , ms centering plates of size 90cm x 60cm of thickness 14 guage with two stiffeners including all necessary jointing arrangement nut bolt and jointing cleats as per tech specs , portable ms body needle vibrator machine with power 3 hp to 5 hp weight 20 to 30 kg petrol engine with min frequency 50 hz voltage 200 to 300 for concrete vibrating as per tech specs

Central Government/Public Sector

CTN :45474981

26 Jun, 2026 14.85 Lacs

Bangalore - Karnataka

Tender For technical bid for supply of hvac operational spares , bearing (6206) size: od, 60 mm x id 50 mm ball bearing desig: 6001-z, ball bearing desig: 6307/2z c3 universal hvac/r controller, armoured 4 core x 6 sqmm xlpe copper cable. 1 sqmm frls multi stranded copper cable (single wire), 10 sqmm frls multi stranded copper cable (single wire) 4 sqmm frls multi stranded copper cable (single wire), fibre glass insulated copper wire for heater size: 6 sqmm, alkaline battery volt: 9vf sealed maintenance free (smf) lean-acid battery 7ah 12v, brush width: 3 inch for painting work. loctite 495 adhesive, kiwi drain cleaner heavy duty industrial safety gloves - cut-resistant (mechanical work), spray foam insulation (pfu) can qty: 750 ml wd 40 multipurpose spray size: 500 ml, green paint (bus green synthetic enamel black paint (synthetic enamel), ms flat bar size: 40 x 5 mm ms l- angle size: 25 x 25 x 5 mm, ms l- angle size: 40 x 40 x 5 mm metal primer (red oxide), black color spary paint 400 ml thread repair helicoil insert ss-m18 x 2.5mm x 1.5d, thread repair helicoil insert ss-m20 x 2.5mm x 1.5d thread repair helicoil, insert ss-m24 x 3mm x 1.5d thinner for oil-based paints, wire type buffing whee bench grinder wheel -heavy grade, dial test indicator (dti) gauge with flexible stem magnetic base stand, digital clamp meter capacity: 600a ac trms heavy duty exhaust fan, size: 9 inch backward curved fan with motor size: 355, mm dia ventilation fan for electrical panel sweep, dia: 12 cm induction motor fan, blade shaft size: 20 mm & blade dia: 130 mm, induction motor fan blade shaft size: 25 mm, & blade dia: 110 mm gi 6 mm x 25 mm bolt & nut with washer, anchor bolt with nut & washer size: 10 mm anchor bolt with nut &, washer size: 8 mm anchor fastner size: 10, mm for threaded rod gi self tapping screw, size: 3/4 inch (20 mm) head type: truss, pop screw size: 1 inch (25 mm) head type: flat (csk). ss self tapping screw size: 2 inch (50 mm), head type: hex din rail size: 35 x 7.5 mm, add on auxiliary contact block (1 no +1 nc) casing and capping size: 20mm (3/4 inch), casing and capping size: 50mm (2 inch) copper strip for electrical motor size: 25 x 3 mm, current transformer (for mfm/ammeter), ratio: 10/5a current transformer (for mfm/ammeter), ratio: 15/5a, current transformer (for mfm/ammeter), ratio: 20/5a current transformer (for mfm/ammeter), ratio: 30/5a, current transformer (for mfm/ammeter), ratio: 5/5a emergency stop switch, metal enclosure electrical junction box, size: 200mmx200mmx150mm, metal enclosure electrical junction box size:, 300mmx300mmx200mm three pole neutral (4p), 32 amps miniature circuit breaker (mcb) 4-way mcb metal enclosure, 2- module surface mounted pvc box. thermal overload relay, range: 14-23 amps electronic fan regulator, single module porcelain heater insulators or terminal. blocks, led indicator color: amber pin type lug size: 1.5 sqmm, pin type lug size: 2.5 sqmm pin type lug size: 4 sqmm, pin type lug size: 6 sqmm spade type lug size: 1.5 sqmm, spade type lug size: 2.5 sqmm metal flexible conduit size:19, motor protection circuit breaker (mpcb) range: 6.3-10 amps (rotary) motor protection circuit breaker (mpcb) inst trip rating: 2.5 amps (rotary), motor protection circuit breaker (mpcb) inst trip rating: 25 amps (rotary) motor protection circuit breaker (mpcb) inst trip rating: 50 amps (rotary), ms conduit size: 25 mm motor terminal block range: 10 hp/7.5 kw, motor terminal block range: 40 hp/30 kw thermal overload relay(olr) range: 20-33 amps, thermal overload relay(olr) range: 42-69 amps plug top 3 pin capacity: 5 amps, 4 pole power contactor capacity: mnx 12 4 pole power contactor capacity: mnx 18, 4 pole power contactor capacity: mnx 9 push button (illuminated) color: green, push button (illuminated) color: red plugable interface relay (4 c/o, 230 vac) with base, plugable interface relay (4 c/o, 24 vac) with base analog timer controller for split ac's, terminal block range: 0.2-2.5 sqmm,

CTN :45445482

22 Jun, 2026 18.68 Lacs

Pathanamthitta - Kerala

Tender For maintenance of sewage treatment plant of kap 3 rd battalion, adoor, pathanamthitta - revamping of the existing sewage treatment plant having water consumption 98 kilo litre /day for kap 3rd battalion, adoor, pathanamthitta)-general mechanical work - general-maintenance of sewage treatment plant of kap 3 rd battalion, adoor ,pathanamthitta -revamping of the existing sewage treatment plant having water consumption 98 kilo litre /day for kap 3 rd battalion,adoor, pathanamthitta -general mechanical work - supply and fill dry bed media, od33450/2025-2026:supply and fill dry bed media (1.5-inch and 3/4 inch pebbles), supply ,installation and commissioning of 3 nos chemical dosing pumps ,suitable chemical storage tanks ,chemical piping,valve and, od39368/2025-2026:supply ,installation and commissioning of 3 nos chemical dosing pumps ,50 ltr chemical storage tanks ,chemical piping,valve and fittings , complete installation and testing, supply, installing ,testing and commissioning of fine bubble diffuser 90 mm 1 m air flow rate 8 -12 m /hr ., od33396/2025-2026:supply, installing ,testing and commissioning of fine bubble diffuser 90 mm 1 m air flow rate 8 -12 m /hr ., supply and installation of blower (7.5 hp) a1 blower and a1 4175 electrical motor, od33397/2025-2026:supply and installation of blower (7.5 hp) a1 blower and a1 4175 electrical motor, supply and installation of submersible grinder pump 1 hp lubi/equt, od33399/2025-2026:supply and installation of submersible grinder pump 1 hp lubi/equt, supply, installation, testing and commissioning of filter feed pump (7.5 hp), od33432/2025-2026:supply, installation, testing and commissioning of filter feed pump (7.5 hp), supply, installation, testing and commissioning of motor lubi/equt, od33433/2025-2026:supply, installation, testing and commissioning of motor lubi/equt 3 phase 5 hp, supply, installation, testing and commissioning sludge pump (2 hp) 3 phase lubi, od33434/2025-2026:supply, installation, testing and commissioning sludge pump (2 hp) 3 phase lubi, supply installing ,testing and commissioning of bar screen (s.s) (40kg ) 304 ss steel (1*40000) 1 hr 10ltr-15ltr capacity, od33210/2025-2026:supply installation, and commissioning of bar screen consisting of 304 ss steel, 1 hr 10ltr-15ltr capacity, supply and fill media in pressure sand filter, od33613/2025-2026:supply and fill media in pressure sand filter ,pebbles( silex 10mm,silex 6mm, and silex 4 mm), supply and fill media in activated carbon filter ., od33615/2025-2026:media fill in activated carbon filter, supply and installation of mbbr media (white colour), od33596/2025-2026:supply and installation of mbbr media (white colour) 60bag -, supply and fittings of various types of pvc,upvc pipes ,pipe fittings and suitable valves etc. to completemplet(not including installation and pipe line fittings of dozing pump and tanks), od34309/2025-2026:supply and installation of 4-inch pvc (6 kg)with cost of pipe and all pipe fittings like bend, coupling etc, cost of valves, laying charges, transportation cost, any additional labour etc complete, od34338/2025-2026:supply and installation of 2-inch pvc (6 kg)with cost of pipe and all pipe fittings like bend, coupling etc, cost of valves, laying charges, transportation cost, any additional labour etc complete, od34339/2025-2026:supply and installation of 1.5-inch pvc (6 kg)with cost of pipe and all pipe fittings like bend, coupling etc, cost of valves, laying charges,, od34341/2025-2026:supply and installation of 2.5 " upvc pipe with cost of pipe and all pipe fittings like bend ,coupling etc.cost of valves ,laying charges, transportation cost any additional labour etc. to complete, supply of electrical panel board with relays, timers, elcb, mcb(6a,10a,16a & 20a ), 50a-dc ammeter, shunt dc, push buttons,, od34593/2025-2026:supply of electrical panel board with relays, timers, elcb, mcb(6a,10a,16a & 20a ), 50a-dc ammeter, shunt dc, push buttons, indicators, heat sink, 40a-manual ch

Ms Conduit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector